| |
|
 |
STMicro
|
| Part No. |
M24256-B M24128-B 6485
|
| OCR Text |
... b11 b10 b9 b8
Note: 1. b15 is treated as Don't Care on the M24256-B series. b15 and b14 are Don't Care on the M24128-B series.
Table 5. Least Significant Byte
b7 b6 b5 b4 b3 b2 b1 b0
There are two modes both for read and write. The... |
| Description |
256/128 Kbit Serial I2C Bus EEPROM With Three Chip Enable Lines
From old datasheet system
|
| File Size |
142.73K /
17 Page |
 View
it Online |
Download Datasheet
|
| |
|
|
STMicro
|
| Part No. |
M24256 M24128 4688
|
| OCR Text |
... b11 b10 b9 b8
Note: 1. b15 is treated as Don't Care on the M24256 series. b15 and b14 are Don't Care on the M24128 series.
Table 6. Least Significant Byte
b7 b6 b5 b4 b3 b2 b1 b0
later. A communication between the master and the sl... |
| Description |
256/128 Kbit Serial I2C Bus EEPROM Without Chip Enable Lines
From old datasheet system
|
| File Size |
122.23K /
15 Page |
View
it Online |
Download Datasheet |
| |
|
|
List of Unclassifed Man...
|
| Part No. |
10551
|
| OCR Text |
...ence in capacitance allows the treated floor to act as a theoretical charge reservoir or natural ground. the capacitance and surface resistance of statguard ? low-voc floor finish treated floors will decay a 5000 volt charge to 0 in le... |
| Description |
Application and Maintenance Program Statguard Low-VOC Dissipative Floor Finish
|
| File Size |
312.01K /
13 Page |
View
it Online |
Download Datasheet |
| |
|
|
LSI Logic
|
| Part No. |
SYM53C140
|
| OCR Text |
...n allows segments A and B to be treated as a point-to-point segment. Segment C is treated as a load segment with at least 8 inches between every node. Table 1.2 shows the various distance requirements for each SCSI bus mode. Table 1.2
Segm... |
| Description |
Bus Controller
|
| File Size |
617.81K /
68 Page |
View
it Online |
Download Datasheet |
| |
|
|
ATMEL[ATMEL Corporation]
|
| Part No. |
AT45DB642D06 AT45DB642D-CNU AT45DB642D_06 AT45DB642D
|
| OCR Text |
...ptional, and the pins should be treated as "no connect" if the SER/BYTE pin is not connected or if the SER/BYTE pin is always driven high externally. Write Protect: When the WP pin is asserted, all sectors specified for protection by the Se... |
| Description |
64-megabit 2.7-volt Dual-interface DataFlash
|
| File Size |
728.83K /
55 Page |
View
it Online |
Download Datasheet |
|
Price and Availability
|
