| |
|
 |
Philips
|
| Part No. |
SA2400A
|
| OCR Text |
...ue to about 50% (1 MHz 100 kHz step) or 10% (100 kHz 10 kHz step) of the signal level. This DC offset then decays according to the high-pass response of the filter. The cutoff frequency of the high-pass filter can also be selected manuall... |
| Description |
Single chip transceiver
|
| File Size |
253.13K /
34 Page |
 View
it Online |
Download Datasheet
|
| |
|
|
CONEXANT[Conexant Systems, Inc]
|
| Part No. |
RF210A RF210B
|
| OCR Text |
...in variation vs. Frequency Gain step tracking error Noise figure: High gain Low gain (12 dB gain, RF210A) Low gain (2 dB gain, RF210B) High gain (Note 1) Input 1 dB compression point Input third order intercept point IF shunt resistance/sid... |
| Description |
Dual-Band. Image-Reject Downconverters For GSM Applications
Dual-Band, Image-Reject Downconverters For GSM Applications
|
| File Size |
73.71K /
8 Page |
View
it Online |
Download Datasheet |
| |
|
|
MAXIM[Maxim Integrated Products]
|
| Part No. |
MAX2335_1 MAX2335 MAX2335EVKIT
|
| OCR Text |
...ely 13dB after corrections from step 9 are applied.
Quick Start
The MAX2335 EV kit is fully assembled and factory tested. Follow the ins...downconverters. Do not turn on the DC power or RF signal generators until all connections are made. ... |
| Description |
Evaluation Kit
|
| File Size |
676.12K /
9 Page |
View
it Online |
Download Datasheet |
| |
|
|
MAXIM - Dallas Semiconductor
MAXIM[Maxim Integrated Products]
|
| Part No. |
MAX2338_1 MAX2338 MAX2338EVKIT MAX23381
|
| OCR Text |
... Setup
This section provides a step-by-step guide to setting up the MAX2338 EV kit and testing the LNA and downconverters. Do not turn on the DC power or RF signal generators until all connections are made.
2
________________________... |
| Description |
Evaluation Kit for the MAX2338
From old datasheet system
|
| File Size |
341.39K /
6 Page |
View
it Online |
Download Datasheet |
| |
|
|
Maxim Integrated Products, Inc.
|
| Part No. |
MAX2820EGM-TD MAX2821EGM-TD MAX2820-MAX2821
|
| OCR Text |
... = VIL, VRX_AGC = +2.0V RF Gain Step DSB Noise Figure (Notes 3, 11) Adjacent Channel Rejection Input Third-Order Intercept Point (Note 5) Input Second-Order Intercept Point (Note 6) TA = +25C TA = -40C to +85C TA = +25C TA = +25C TA = +25C ... |
| Description |
2.4GHz 802.11b Zero-IF Transceivers
|
| File Size |
382.20K /
23 Page |
View
it Online |
Download Datasheet |
| |
|
|
Maxim Integrated Products, Inc.
|
| Part No. |
MAX23351 MAX2335EVKIT
|
| OCR Text |
...d setup this section provides a step-by-step guide to setting up the max2335 ev kit and testing the lna and down- converters. do not turn on the dc power or rf sig- nal generators until all connections are made. low-noise amplifier, high-g... |
| Description |
Evaluation Kit
|
| File Size |
685.68K /
9 Page |
View
it Online |
Download Datasheet |
| |
|
|
Skyworks Solutions
|
| Part No. |
SKY74100-21
|
| OCR Text |
...for the q channel. a 15 db gain step is provided in the filter, programmed either through the three-wire bus or through the mix_gainstep signal (pin 13). dc offset correction (dcoc) dcoc is provided as part of the baseband filter transf... |
| Description |
Dual-Band Receiver
|
| File Size |
222.14K /
11 Page |
View
it Online |
Download Datasheet |
|
For
step-downconverters Found Datasheets File :: 10 Search Time::1.86ms
Page :: | <1> | 2 | |
▲Up To
Search▲ |
|
Price and Availability
|
