|
|
|
Mitsubishi Electric Corporation MITSUBISHI[Mitsubishi Electric Semiconductor]
|
Part No. |
M65863FP M65863E
|
OCR Text |
... bitstream 2) Dolby Pro Logic*1 encoded 2ch Dolby Digital (AC-3) bitstream 3) Dolby Pro Logic encoded 2ch PCM data * All input combinations from 1 to 5.1 channels * Output : mono 5.1 surround * Sampling rates : 32kHz, 44.1 kHz, 48 kHz and 9... |
Description |
Dolby Digital Decoder From old datasheet system
|
File Size |
456.20K /
61 Page |
View
it Online |
Download Datasheet |
|
|
|
Data Delay Devices, Inc...
|
Part No. |
3D7523-10 3D7523-25 3D7523-50
|
OCR Text |
...he loop input is set high, the encoded tx signal is fed back internally into the decoder and the rx input is ignored. this feature is useful for diagnostics. the loop input has an inte rnal pull-down resistor and may be left uncommitte... |
Description |
MONOLITHIC MANCHESTER ENCODER/DECODER
|
File Size |
154.18K /
5 Page |
View
it Online |
Download Datasheet |
|
|
|
MAXIM[Maxim Integrated Products]
|
Part No. |
MAX7031ATJ MAX7031
|
OCR Text |
... rates up to 33kbps (Manchester encoded) or 66kbps (NRZ encoded). This device generates a typical output power of +10dBm into a 50 load, and exhibits typical sensitivity of -110dBm. The MAX7031 features separate transmit and receive pins (P... |
Description |
Low-Cost, 308MHz, 315MHz, and 433.92MHz FSK Transceiver with Fractional-N PLL
|
File Size |
236.56K /
19 Page |
View
it Online |
Download Datasheet |
|
|
|
MICROCHIP[Microchip Technology]
|
Part No. |
MCRF202-I_WQ99 MCRF202 MCRF202-I_P MCRF202-I_S MCRF202-I_SB MCRF202-I_SN MCRF202-I_W MCRF202-I_WB MCRF202-I_WF MCRF202-I_WFB
|
OCR Text |
...tails.
The MCRF202 sends the encoded data to the reader by AM-modulating the coil voltage across the tuned LC circuit. A modulation transistor is placed between the antenna coil pads (VA and VB). The transistor turns on and off based on ... |
Description |
The MCRF202 is a passive Radio Frequency Identification (RFID) IC device with an external sensor Input that provides an RF interface for reading the contents of a user memory array. The MCRF202 is specially designed to detect the logic sta 125 kHz Passive RFID Device with Sensor Input From old datasheet system
|
File Size |
245.97K /
20 Page |
View
it Online |
Download Datasheet |
|
|
|
http:// MICREL[Micrel Semiconductor]
|
Part No. |
MICRF213AYQS MICRF213
|
OCR Text |
... 1.18kHz to 9.44kHz, Manchester encoded). The user need only configure the device with a set of easily determined values, based upon data rate, code modulation format, and desired duty-cycle operation.
Features
* * * * * * * * Up to -11... |
Description |
3.3V, QwikRadio? 315MHz Receiver 3.3V, QwikRadio 315MHz Receiver 3.3V, QwikRadio㈢ 315MHz Receiver
|
File Size |
838.72K /
16 Page |
View
it Online |
Download Datasheet |
|
|
|
ZARLINK[Zarlink Semiconductor Inc]
|
Part No. |
MV1442MPES MV1442 MV1442DPAS MV1442IG
|
OCR Text |
...put high. In this mode the HDB3 encoded pseudo-ternary data outputs of the Encoder block are fed back as the inputs to the Decoder block, which in turn decodes this data and outputs it in NRZ form.
Clock Regenerator HDB3 Encoder
The HDB... |
Description |
HDB3 Encoder/Decoder/Clock Regenerator
|
File Size |
611.51K /
12 Page |
View
it Online |
Download Datasheet |
|
Price and Availability
|