| |
|
 |
TIANMA
|
| Part No. |
TM160128ADCSPEC TM160128ADC
|
| OCR Text |
... Content of Test Endurance test applying the high storage temperature for a long time Endurance test applying the low storage temperature for a long time Endurance test applying the High Temperature electric stress (voltage current) Operati... |
| Description |
LCD_Module
|
| File Size |
396.03K /
23 Page |
 View
it Online |
Download Datasheet
|
| |
|
|
Maxim
|
| Part No. |
MAX9150EVKIT
|
| OCR Text |
...able
The MAX9150 is enabled by applying a logic high to the PWRDN pin and is disabled by applying a logic low. On the MAX9150 EV kit, this can be accomplished by configuring JU18 for circuit 2, or JU1 for circuit 1. To enable the respectiv... |
| Description |
Evaluation Kit for the MAX9150
From old datasheet system
|
| File Size |
324.02K /
9 Page |
View
it Online |
Download Datasheet |
| |
|
|
Sanyo
|
| Part No. |
STK6877 2310
|
| OCR Text |
...T Drive Circuits When starting (applying power to) the driver circuit (STK6877), the external control signals must be set to standby mode, i.e., pins A and B both set to low (setting both these pins high is an illegal mode). Then, after the... |
| Description |
Reversible Brush-Type DC Motor Driver (output current: 8 A)
From old datasheet system
Thick FiLm Hybird IC
|
| File Size |
123.41K /
8 Page |
View
it Online |
Download Datasheet |
| |
|
|
Cypress
|
| Part No. |
CY7C245A 7C245A
|
| OCR Text |
...he device must be clocked after applying these voltages to perform this measurement. 6. For test purposes, not more than one output at a time should be shorted. Short circuit test duration should not exceed 30 seconds.
2
CY7C245A
AC ... |
| Description |
2K x 8 Reprogrammable Registered PROM
From old datasheet system
|
| File Size |
300.12K /
11 Page |
View
it Online |
Download Datasheet |
| |
|
|
Hittite Microwave Corpo...
HITTITE[Hittite Microwave Corporation]
美国讯泰微波有限公司上海代表
|
| Part No. |
HMC361
|
| OCR Text |
... grounded for normal operation. applying 5 volts to this pin will power down this device.
14
DISABLE
The disable pin is grounded for normal operation. applying 5 volts to this pin will disable the input buffer amplifier.
Truth T... |
| Description |
GaAs HBT MMIC DIVIDE-BY-2, DC - 11.0 GHz
From old datasheet system
Prescaler
600,000 SYSTEM GATE 1.8 VOLT FPGA - NOT RECOMMENDED for NEW DESIGN
GaAs HBT MMIC DIVIDE-BY-2/ DC - 11.0 GHz
|
| File Size |
197.79K /
6 Page |
View
it Online |
Download Datasheet |
| |
|
|
SANYO[Sanyo Semicon Device]
|
| Part No. |
LC75811W LC75811E 2040
|
| OCR Text |
...n oscillator operates. Used for applying the LCD drive 3/4 bias voltage externally. Used for applying the LCD drive 2/4 bias voltage externally. Used for applying the LCD drive 1/4 bias voltage externally. Logic block power supply connectio... |
| Description |
From old datasheet system
1/8 to 1/10 Duty Dot Matrix LCD Display Controller/Driver
CMOS IC
|
| File Size |
622.94K /
27 Page |
View
it Online |
Download Datasheet |
|
Price and Availability
|
