design and specifications are each subject to change without notice. ask factory for the current technical specifications before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. conductive polymer tantalum solid capacitors r.cap. code lot. no. r. voltage code polarity marking(+) s w1 h - w s surface mount type series : tqc size : b high voltage (35 v.dc max.) rohs compliance, halogen free features characteristics list size code b2 category temperature range C55 c to +105 c rated voltage range 16 v.dc to 35 v.dc category voltage range 16 v.dc to 35 v.dc rated capacitance range 3.9 f to 33 f capacitance tolerance 20 % (120 hz / + 20 c) leakage current please see the attached characteristics list dissipation factor (tan d ) please see the attached characteristics list surge voltage (v.dc) rated voltage 1.15 endurance +105 c, 2000 h (16tqc33myfb : 1000 h), rated voltage applied capacitance change within 20 % of the initial value tan d < 1.5 times of the initial limit dc leakage current within the initial limit damp heat (steady state) +60 c, 90 % to 95 %, 500 h, no-applied voltage capacitance change within +40 %, ?20 % of the initial value tan d < 1.5 times of the initial limit dc leakage current < 3 times of the initial limit size code l0.2 w0.2 h0.1 s0.2 w10.1 b2 3.5 2.8 1.9 0.8 2.2 r. voltage (v.dc) 16 20 25 35 code cde v r. cap. (f) 3.9 5.6 8.2 10 15 22 33 code q6 u6 y6 a7 e7 j7 n7 series rated voltage (v.dc) rated temp. (c) category voltage (v.dc) category temp. (c) rated capacitance (f) case size (mm) size code specifications standard floor life lwh ripple ? 1 current (mar.m.s.) esr ? 2 (m max.) tan d ? 3 lc ? 4 (a) part number min. packaging q'ty (pcs) re? ow temp < 260c re? ow temp < 250c tqc 16 105 16.0 105 10 3.5 2.8 1.9 b2 800 100 0.10 48.0 16tqc10m 2000 C3 105 16.0 105 15 3.5 2.8 1.9 1000 90 0.10 72.0 16tqc15m 2000 105 16.0 105 22 3.5 2.8 1.9 1000 90 0.10 35.2 16tqc22myfb 2000 105 16.0 105 33 3.5 2.8 1.9 1000 90 0.10 158.4 16tqc33myfb 2000 20 105 20.0 105 8.2 3.5 2.8 1.9 800 100 0.10 49.2 20tqc8r2m 2000 105 20.0 105 22 3.5 2.8 1.9 1100 90 0.10 132.0 20tqc22myfb 2000 25 105 25.0 105 5.6 3.5 2.8 1.9 800 100 0.10 42.0 25tqc5r6m 2000 105 25.0 105 15 3.5 2.8 1.9 900 100 0.10 112.5 25tqc15myfb 2000 35 105 35.0 105 3.9 3.5 2.8 1.9 500 400 0.10 40.9 35tqc3r9myf 2000 ? 1 ripple current (100 khz/ +105 c ), ? 2 esr (100 khz/+20 c) ? 3 tan d (120 hz/+20 c) ? 4 after 5 minutes please refer to each page in this catarog for reflow conditions and taping specifications. unit : mm marking dimensions (not to scale) ? externals of ? gure are the reference. speci cations jun. 2018 03 downloaded from: http:///
design and specifications are each subject to change without notice. ask factory for the current technical specifications before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. conductive polymer tantalum solid capacitors r.cap. code lot. no. r. voltage code polarity marking(+) s w1 h - w s surface mount type series : tqc size : d high voltage (35 v.dc max.) rohs compliance, halogen free size code d12 d15 d2 d3l category temperature range ?5 ? to +105 ? rated voltage range 16 v.dc 16 v.dc to 25 v.dc 16 v.dc to 35 v.dc 16 v.dc to 25 v.dc category voltage range 16 v.dc 16 v.dc to 25 v.dc 16 v.dc to 35 v.dc 16 v.dc to 25 v.dc rated capacitance range 33 ? 22 ? to 47 ? 10 ? to 100 ? 68 ? to 150 ? capacitance tolerance ?0 % (120 hz / + 20 ?) leakage current please see the attached characteristics list dissipation factor (tan d ) please see the attached characteristics list surge voltage (v.dc) rated voltage 1.15 endurance +105 ?, 2000 h, rated voltage applied capacitance change within 20 % of the initial value tan d < 1.5 times of the initial limit dc leakage current within the initial limit damp heat (steady state) +60 c, 90 % to 95 %, 500 h, no-applied voltage capacitance change within +40 %, ?20 % of the initial value tan d < 1.5 times of the initial limit dc leakage current < 3 times of the initial limit r. voltage (v.dc) 16 20 25 35 code c d 1e v series rated voltage (v.dc) rated temp. (?) category voltage (v.dc) category temp. (?) rated capacitance (?) case size (mm) size code specifications standard floor life lwh ripple ? 1 current (mar.m.s.) esr ? 2 (m max.) tan d ? 3 lc ? 4 (?) part number min. packaging q'ty (pcs) re ow temp < 260? re ow temp < 250? tqc 16 105 16.0 105 33 7.3 4.3 1.15 d12 1800 40 0.10 52.8 16TQC33MYFS 4500 ? 105 16.0 105 7.3 4.3 1.9 d2 1400 70 0.10 52.8 16tqc33myfd 3000 105 16.0 105 47 7.3 4.3 1.4 d15 1500 55 0.10 75.2 16tqc47myft 3000 105 16.0 105 7.3 4.3 1.9 d2 1800 40 0.10 75.2 16tqc47mw 3000 105 16.0 105 7.3 4.3 1.9 1450 55 0.10 75.2 16tqc47myfd 3000 105 16.0 105 68 7.3 4.3 1.9 1500 50 0.10 108.8 16tqc68myf 3000 105 16.0 105 100 7.3 4.3 1.9 1800 50 0.10 160.0 16tqc100myf 3000 105 16.0 105 150 7.3 4.3 2.8 d3l 1800 50 0.10 240.0 16tqc150myf 2500 105 16.0 105 150 7.3 4.3 1.9 d2 1500 70 0.15 240.0 1ctqc15173f1 3000 20 105 20.0 105 33 7.3 4.3 1.9 1400 60 0.10 66.0 20tqc33myfd 3000 105 20.0 105 47 7.3 4.3 1.9 1450 55 0.10 94.0 20tqc47myf 3000 105 20.0 105 7.3 4.3 1.4 d15 1500 55 0.10 94.0 20tqc47myft 3000 105 20.0 105 100 7.3 4.3 1.9 d2 1250 100 0.15 200.0 20tqc100md2 3000 105 20.0 105 7.3 4.3 2.8 d3l 1700 55 0.10 200.0 20tqc100myf 2500 25 105 25.0 105 15 7.3 4.3 1.9 d2 1500 45 0.10 38.0 25tqc15mv 3000 105 25.0 105 7.3 4.3 1.9 1000 90 0.10 38.0 25tqc15myfd 3000 105 25.0 105 22 7.3 4.3 1.9 1500 45 0.10 55.0 25tqc22mv 3000 105 25.0 105 7.3 4.3 1.9 1400 60 0.10 55.0 25tqc22myfd 3000 105 25.0 105 7.3 4.3 1.4 d15 1400 70 0.10 55.0 25tqc22myft 3000 105 25.0 105 33 7.3 4.3 1.9 d2 1400 60 0.10 82.5 25tqc33myf 3000 105 25.0 105 68 7.3 4.3 2.8 d3l 1400 70 0.10 170.0 25tqc68myf 2500 35 105 35.0 105 10 7.3 4.3 1.9 d2 1000 120 0.10 35.0 35tqc10m 3000 105 35.0 105 7.3 4.3 1.9 1000 120 0.10 35.0 35tqc10myf 3000 105 35.0 105 15 7.3 4.3 1.9 900 150 0.10 52.5 35tqc15myf 3000 ? 1 ripple current (100 khz/ +105 ? ), ? 2 esr (100 khz/+20 ?) ? 3 tan d (120 hz/+20 ?) ? 4 after 5 minutes please refer to each page in this catarog for ?eflow conditions?and ?aping specifications? unit : mm ? externals of gure are the reference. ? 1 ?.3 : d3l ? 2 ?.05 : d12, ?.2 : d3l features speci cations characteristics list marking dimensions (not to scale) size code l?.2 w?.2 h?.1 s?.2 w1?.1 d12 7.3 4.3 1.15 1.3 2.4 d15 7.3 4.3 1.4 1.3 2.4 d2 7.3 4.3 1.9 1.3 2.4 d3l 7.3 4.3 2.8 1.3 2.4 ? 1 ? 2 jun. 2018 03 downloaded from: http:///
if you want to use our products described in this onlin e catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially caus e personal injury (e.g. aircraft and aerospace equipment, traffic and transportat ion equipment, combustion equipment, medical equipment, accident prevention, anti-crime eq uipment, and/or safety equipment), it is necessary to verify whether the specificatio ns of our products fit to such applications. please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. the quality and performance of our products as described in this online catalog only apply to our products when used in isolation. therefore, please en sure you evaluate and verify our products under the specific circumstances in which our pr oducts are assembled in your own products and in which our products will actually be used. if you use our products in equipment that requires a h igh degree of reliability, regardless of the application, it is recommended that you set up protectio n circuits and redundancy circuits in order to ensure safety of your equipment. the products and product specifications described in this online catalog are subject to change for improvement without prior notice. therefore, pleas e be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, pu rchase, or use our products. the technical information in this online catalog provides example s of our products' typical operations and application circuits. we do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. if any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and ex port control, shall be observed. the switchover date for compliance with the rohs directive /reach regulations varies depending on the part number or series of our products. when you use the inventory of our products for which it is unc lear whether those products are compliant with the rohs directive/reach regulation, please se lect "sales inquiry" in the website inquiry form and contact us. we do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. guidelines and precautions regarding the described in this online catalog. downloaded from: http:///
|
