mplad6.5kp10a(e3) C mplad6.5kp48ca(e3) available 6.5 kw, unidirectional and bidirectional tvs protection device high - reliability screening available in reference to mil - prf - 19500 description these 6.5 kw rated transient voltage suppressors (tvs) in a surface mount plad package are provided with design features to minimize thermal resistance and cumulative heating. these device s have the ability to clamp dangerous high voltage, short term transients such as thos e produced by directed or radiated electrostatic discharge phenomena before entering sensitive component regions of a cir cuit design. typical applications include lighting and automotive load dump protection. they are particularly effective at meeting the multi - stroke lightning standard rtca do - 160, section 22 for aircraft design. this efficient low profile package design is offered in standoff voltage selections (v wm ) of 10 volt to 48 volts in either unidirectional or bidirectional construction. this product addition expands high reliable plad product portfolio. for more information on plad products, broad range of tvs devices please visit our website. tested in accordance with the requirements of aec - q101 mini - plad (the c athode is the heatsink under the body of th is device .) important: for the latest information, visit our website http://www.microsemi.com . features ? available in both u nidirectional and b idirectional construction ( b idirectional with ca suffix). ? high reliability with wafer fabrication and assembly lot traceability . ? all parts surge tested . ? low profile surface mount package . ? optional upscreening is available with various screening and conformance inspection optio ns based on mil - prf - 1950 0. refer to hi -r el non - hermetic produc ts brochure on our web site for more details on the screening options . ? suppresses transients up to 6,5 00 w @ 10/1000 s (see f igure 1 ). ? moisture classification is level 1 with no dry pack required per ipc/jedec j - std - 020 . ? 3 lot norm screening performed on s tandby c urrent (i d ). ? rohs compliant (2002/95/ec) devices available. ? halogen free (iec 61249 -2- 21) applications / benefits ? protection from switching transients and induced rf . ? protection from esd, and eft per iec 61000 -4- 2 and iec 61000 -4-4. ? secondary lightning protection per iec 61000 -4- 5 with 42 o hms source impedance: class 1,2,3,4,5: mplad 6.5 kp1 0a to 48 ca ? secondary lightning protection per iec 61000 -4- 5 with 12 o hms source impedance: class 1,2,3,4: mplad6.5kp1 0a to 48 ca ? secondary lightning protection per iec 61000 -4- 5 with 2 o hms source impedance: class 2,3: mplad 6. 5kp1 0a to 48 ca class 4: mplad 6.5kp10a to 22 ca ? pin injection protection per rtca/do - 160 f for waveform 4 (6.4/69 s at 25 oc )*: level 1,2,3, 4: mplad6.5kp10a to 48 ca level 5: mplad6.5kp10a to 4 3 ca ? pin injection protection per rtca/do - 160 f for waveform 5a (40/120 s at 25 oc )*: level 1 and 2: mplad6.5kp10a to 48ca level 3: mplad6.5kp10a to 36ca level 4: mplad6.5kp10a to 12 ca ? i pp rating of 40.1 amps to 383 amps. ? v wm rating of 10 volts to 48 volts. ? v (br)(min) range of 11.1 volts to 53.3 volts. ? v c(max) rating of 17 volts to 77.4 volts *see micronote 132 for furthe r temperature derating selection . msc C lawrence 6 lake street, lawrence, ma 01841 tel: 1- 800 - 446 - 1158 or (978) 620 - 2600 fax: (978) 689 - 0803 msc C ireland gort road business park, ennis, co. clare, ireland tel: +353 (0) 65 6840044 fax: +353 (0) 65 6822298 website: www.microsemi.com rf01083, rev b ( 24 /6 /1 5) ?201 5 microsemi corporation page 1 of 6 downloaded from: http:///
mplad6.5kp10a(e3) C mplad6.5kp48ca(e3) maximum ratings @ 25 o c unless otherwise specified parameters/test conditions symbol value unit junction and storage temp erature t j and t stg - 55 to +150 oc /w thermal resistance junction - to - ambient (1) r ? ja 50 oc /w thermal resistance junction - to - case r ? jc 1.5 oc /w peak pulse power @ 10/1000 s (2) p pp 6, 5 00 w t clamping (0 volts to v ( br) min) unidirectional bidirectional <100 <5 ps ns forward clamping voltage @ 3 00 amps (3) v fs 2 .5 v forward surge current (3) i fsm 4 00 a solder temperature @ 10 s t sp 260 oc rated average power dissipation (5) t a = 25 c t c = 100 c p m(av) 2.5 (1) 33.3 (4) w w notes : 1. w hen mounted on fr4 pc board with recommended mounting pad (see pad layout ). 2. a lso see f igures 1 and 2 . w ith impulse repetition rate (duty factor) of 0.05% or less . 3. at 8.3 ms half - sine wave (unidirectional devices only). 4. case temperature controlled on heat sink as specified. 5. see micronote 134 for derating p pp when also applying steady - state power. mechanical and packaging ? case: epoxy, meets ul94v - 0. ? terminals: tin/lead or m atte - tin ( fully rohs compliant ) plating . ? marking: p art number. ? delivery option: tape and reel (13 inch). ? see p ackage d imensions on last page. part nomenclature m plad 6.5k p 7.0 ca (e3) reliability level * m ma mx mxl *(see hi -r el non - hermetic produc t portfolio ) package designation p pp rating (w) rohs compliance e3 = rohs compliant blank = non - rohs compliant polarity a = unidirectional ca = bidirectional reverse standoff voltage plastic rf01083, rev b ( 24 /6 /1 5) ?201 5 microsemi corporation page 2 of 6 downloaded from: http:///
mplad6.5kp10a(e3) C mplad6.5kp48ca(e3) symbols & definitions symbol definition i (b r) breakdown current: the current used for measuring b reakdown v oltage v ( br) . i d standby current: the current at the rated standoff voltage v wm . i pp peak impulse current: the peak current during the impulse. v (br) breakdown voltage: the minimum voltage the device will exhibit at a specified current. v c clamping voltage: clamping v oltage at i pp (p eak p ulse c urrent) at the specified pulse conditions (typically shown as maximum value). v wm rated working standoff voltage: the maximum peak voltage that can be applied over the operating temperature range. v(br) temperature coefficient of breakdown voltage: the change in breakdown voltage divided by change in temperat ure. electrical characteristics @ 25 oc unless otherwise stated device * reverse stand - off voltage v wm breakdown voltage v ( br ) v ( br ) @ i ( br ) maximum clamping voltage v c @ i pp maximum standby current i d @ v wm maximum peak pulse current (fig. 2) i pp maximum temperature coefficient of v ( br ) v( br ) volts volts ma volts a amps mv/ c mplad6.5kp10a(e3) 10 11.1 - 12.3 5 17.0 15 383 9 mplad6.5kp11a(e3) 11 12.2 - 13.5 5 18.2 10 358 10 mplad6.5kp12a(e3) 12 13.3 - 14.7 5 19.9 10 327 11 mplad6.5kp13a(e3) 13 14.4 - 15.9 5 21.5 10 302 12 mplad6.5kp14a(e3) 14 15.6 - 17.2 5 23.2 10 280 13 mplad6.5kp15a(e3) 15 16.7 - 18.5 5 24.4 10 267 15 mplad6.5kp16a(e3) 16 17.8 - 19.7 5 26.0 10 250 16 mplad6.5kp17a(e3) 17 18.9 - 20.9 5 27.6 10 236 18 mplad6.5kp18a(e3) 18 20.0 - 22.1 5 29.2 10 223 19 mplad6.5kp20a(e3) 20 22.2 - 24.5 5 32.4 10 202 22 mplad6.5kp22a(e3) 22 24.4 - 26.9 5 35.5 10 183 24 mplad6.5kp24a(e3) 24 26.7 - 29.5 5 38.9 10 167 27 mplad6.5kp26a(e3) 26 28.9 - 31.9 5 42.1 10 154 29 mplad6.5kp28a(e3) 28 31.1 - 34.4 5 45.5 10 143 30 mplad6.5kp30a(e3) 30 33.3 - 36.8 5 48.4 10 135 35 mplad6.5kp33a(e3) 33 36.7 - 40.6 5 53.3 10 123 38 mplad6.5kp36a(e3) 36 40.0 - 44.2 5 58.1 10 111 40 mplad6.5kp40a(e3) 40 44.4 - 49.1 5 64.5 10 101 45 mplad6.5kp43a(e3) 43 47.8 - 52.8 5 69.4 10 93 49 mplad6.5kp45a(e3) 45 50.0 C 55.3 5 72.7 10 89 51 mplad6.5kp48a(e3) 48 53.3 C 58.9 5 77.4 10 85 54 * see part nomenclature for additional screening prefixes. rf01083, rev b ( 24 /6 /1 5) ?201 5 microsemi corporation page 3 of 6 downloaded from: http:///
mplad6.5kp10a(e3) C mplad6.5kp48ca(e3) graphs tp C pulse time C sec figure 1 peak pulse power vs. pulse time (to 50% of exponentially decaying pulse) test waveform parameters: tr = 10 s, tp = 1000 s figure 2 pulse waveform i pp peak pulse current - % i pp p pp C peak pulse power C kw rf01083, rev b ( 24 /6 /1 5) ?201 5 microsemi corporation page 4 of 6 downloaded from: http:///
mplad6.5kp10a(e3) C mplad6.5kp48ca(e3) graphs (continued) t l lead temperature oc figure 3 derating curve p pp peak pulse power - % p pp rf01083, rev b ( 24 /6 /1 5) ?201 5 microsemi corporation page 5 of 6 downloaded from: http:///
mplad6.5kp10a(e3) C mplad6.5kp48ca(e3) package dimensions pa d layout ref. dimensions inch millimeters min max min max a1 0.339 0.355 8.61 9.02 a2 0.279 0.295 7.09 7.49 b 0.119 0.135 3.02 3.43 c 0.438 0.454 11.13 11.53 d 0.094 0.110 2.39 2.79 g 0.064 0.080 1.63 2.03 h 0.024 0.040 0.61 1.02 j 0.008 0.012 0.20 0.30 ref. dimensions inch millimeters typical typical a 0 .357 9.08 b 0 .117 2.97 c 0 .08 0 2.03 d 0.033 0.84 rf01083, rev b ( 24 /6 /1 5) ?201 5 microsemi corporation page 6 of 6 downloaded from: http:///
|
