09-2016, rev. 0916 www.te.com ? 2015 tyco electronics corporation, a te connectivity ltd. company datasheets and product specifcation according to iec 61810-1 and to be used only together with the defnitions section. datasheets and product data is subject to the terms of the disclaimer and all chapters of the defnitions section, available at http://relays.te.com/definitions datasheets, product data, defnitions sec - tion, application notes and all specifcations are subject to change. 1 general purpose relays power relays power pcb relay T9S solar insulation data initial dielectric strength between open contacts 2500v rms between contact and coil 4000v rms clearance/creepage between contact and coil 3/4mm material group of insulation parts iii tracking index of relay base pti 325 other data material compliance: eu rohs/elv, china rohs, reach, halogen content refer to the product compliance support center at www.te.com/customersupport/rohssupportcenter ambient temperature -40 to +85c 1) category of environmental protection iec 61810 rtii - fux proof vibration resistance (functional) 10g shock resistance (functional) 10g shock resistance (destructive) 100g terminal type pcb-tht mounting see note 1) mounting distance 10mm weight appr. 30g resistance to soldering heat tht iec 60068-2-20 260c/5s packaging unit box/500 pcs. 1) the relay connections and wiring have to be designed with an adequate cross sections to ensure the current fow and heat dissipation. n 1 pole 35a, 1 form a (no) contact n contact gap >1.5mm (standard), >1.8mm (suffx s) n 350mw hold power n ambient temperature up to 85c at 35a n the appliance is able to meet vde v 0126-1-1 n product in accordance to iec 60335-1 n en61095: ac7a at 85c typical applications photovoltaic inverter approvals vde 40030974, ul e58304 technical data of approved types on request contact data contact arrangement 1 form a (no) contact gap >1.5mm (standard), >1.8mm (suffx s) rated voltage 250vac (1.8mm gap), 277vac (1.5mm gap) rated current 35a 1) breaking capacity max. 8750 va contact material agni initial contact resistance 75m? max. at 1a 6vdc frequency of operation, with/without load 6/300min -1 operate/release time max., incl bounce time 18/15ms contact ratings 2) type contact load cycles iec 61810 T9Sv1k15-12 a (no) 35a, 250vac, cos =1, 85c 30x10 3 T9Sv1k15-12s a (no) 35a, 250vac, cos =1, 85c 20x10 3 ul 508 T9Sv1k15-12 a (no) 35a, 277vac, resistive, 85c 30x10 3 T9Sv1k15-12s a (no) 35a, 250vac, resistive, 85c 20x10 3 mechanical endurance, dc coil 1x10 6 operations 1) the relay connections and wiring have to be designed with an adequate cross sections to ensure the current fow and heat dissipation. 2) contact ratings with relay properly verted. coil data rated coil voltage 12vdc coil insulation system according ul class f coil versions, dc coil coil rated operate release coil rated coil code voltage voltage voltage resistance power vdc vdc vdc ?10% w 12 12 2) 9.6 0.8 64+10% 2.25 / min. 0.35 hold 2) after the energization time of 100 ms with 12 vdc the coil requires a reduction of the coil voltage to 4.7...6.0 vdc. all fgures are given for coil without pre-energization, at ambient temperature +23c. other coil voltages on request. f0156_bc_inv u potter & brumfeld
09-2016, rev. 0916 www.te.com ? 2015 tyco electronics corporation, a te connectivity ltd. company datasheets and product specifcation according to iec 61810-1 and to be used only together with the defnitions section. datasheets and product data is subject to the terms of the disclaimer and all chapters of the defnitions section, available at http://relays.te.com/definitions datasheets, product data, defnitions sec - tion, application notes and all specifcations are subject to change. 2 general purpose relays power relays power pcb relay T9S solar (continued) dimensions pcb layout / terminal assignment bottom view on solder pins notes 1) general tolerance 2) dimensions of the pins after tin soldering a) +0.4 for the width and the thickness b) +1.0 for the length diagram dimension tolerance < 1 mm 0.1 1 ~ 3 mm 0.2 > 3 mm 0.3 product code version contact arrangement contact material contact gap coil part number T9Sv1k15-12 pcb, fux tight 1 form a (no) contact agni >1.5mm 12vdc 2027395-1 T9Sv1k15-12s pcb, fux tight 1 form a (no) contact agni >1.8mm 12vdc 2027395-3 potter & brumfeld
|
