.01969 (typ) 0.5000 "b" (no of pos - 1) x .01969[0.5001] "a" (no of pos x .01969[0.500]) + .1368[3.475] .0782 ref 1.986 .0415 1.054 .0570 (typ) 1.448 .0120 (typ) 0.305 .0400 1.016 (for -a option) (npth typ) .3000 7.620 (no of pos x .01969[0.5000]) + .1968[5.000] ref .0470 1.194 (for -lc option) (npth typ) d d 01 02 connector outline fig 1 bth-060-xx-x-d-xx shown c l sheet of recommended pcb layout for bth-xxx-xx-x-d-xx proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. 2 1 revision d f:\dwg\misc\mktg\footprnt\bth-xxx-xx-x-d-xx-footprint.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322 notes: 1. all dimensions are symmetric about the centerline.
fig 2 bth-060-xx-x-d-xx same as fig 1 except where shown sheet of recommended stencil layout for bth-xxx-xx-x-d-xx proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. 2 2 revision d f:\dwg\misc\mktg\footprnt\bth-xxx-xx-x-d-xx-footprint.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322 notes: 1. recommended stencil thickness to be: .006[0.15].
|