agilent IDP-10 dry scroll vacuum pump data sheet the agilent IDP-10 dry scroll pump is a compact, high performance, oil-free vacuum pump that is easy to maintain. the inverter driven motor provides uniform vacuum performance at all global frequencies and input voltages. the hermetic design, with the motor and all bearings completely isolated from the vacuum path extends the bearing life and provides clean, dry vacuum. an optional integral inlet protection valve, built into the pump module, is available and adds no additional height to the pump. dimensions: millimeters [inches] IDP-10 dry scroll single sided hermetic vacuum pump peak pumping speed 170 l/min (10.2 m 3 /h) at full speed media no corrosive, explosive or particulate forming gases ultimate pressure 2.0 x 10 -2 mbar (1.5 x 10 -2 torr) max. inlet pressure 1.0 atmosphere (0 psig) max. recommended continuous inlet pressure 2.0 x 10 -2 mbar (1.5 x 10 -2 torr) max. outlet pressure at nom voltage 1.34 atmosphere (5 psig) inlet connection nw25 exhaust connection nw16 gas ballast female, 0.25 inch, national pipe thread, (20 m sintered plug provided) sae-2 5/16-24 water vapor handling per pneurop 6602 120 grams/hr maximum ambient operating temperature 5 to 40 c (41 to 104 f) storage temperature C20 to 60 c (C4 to 140 f) motor rating 0.5 hp (350 w); 3? inverter driven operating voltages 100-127; 200-240 vac, 50/60 hz motor thermal protection automatic thermal protection operating speed 63.33 hz: 1900 rpm; 45 hz: 1350 rpm cooling system air-cooled weight pump only: 24.74 kg (54.5 lbs), shipping weight: 28.1 kg (62 lbs) dimensions (h x w x l mm) 297 x 260 x 420 leak rate (with exhaust sealed) <1 x 10 -6 sccs (1 x 10 -6 mbar.l/s) noise level 53 +/- 2 db (a) vibration level at inlet 7 mms -1 rms hour meter integral hour meter provided emissions and immunity en 61236-1:2013 as a class a device safety en/iec 61010 3rd edition certifed technical specifcations 113.3 [4.46] 9.5 [.38] 165.4 [6.51] 174.3 [6.86] 183.8 [7.24] 287.6 [11.32] 297.1 [11.70] 4x ? min 6.3 [.27] 420.1 [16.54] 109.6 [4.31] 144.6 [5.69] 184.7 [7.27] 260 [10.24] 374.0 [14.72] 204.3 [8.04] 102.2 [4.02] 138.1 [5.44] cutaway 113.3 [4.46] 9.5 [.38] 165.4 [6.51] 174.3 [6.86] 183.8 [7.24] 287.6 [11.32] 297.1 [11.70] 4x ? min 6.3 [.27] 420.1 [16.54] 109.6 [4.31] 144.6 [5.69] 184.7 [7.27] 260 [10.24] 374.0 [14.72] 204.3 [8.04] 102.2 [4.02] 138.1 [5.44] cutaway
IDP-10 dry scroll pumps and accessories description part number IDP-10 dry scroll vacuum pump x3810-64000 IDP-10 dry scroll vacuum pump with inlet isolation valve x3810-64010 service parts idp-7 and IDP-10 tip seal replacement kit x3807-67000 accessory parts exhaust silencer kit x3807-68003 purge kit x3807-68004 gas ballast kit x3807-68008 inlet trap scrintrpnw25 vibration isolation kit sh110vibisokit power cords for idp-3 ac motor, idp-7, IDP-10, and idp-15 vacuum pumps description part number europe, 10 a/220-230 v, 2.5 m 656494220 denmark, 10 a/220-230 v, 2.5 m 656494225 switzerland, 10 a/230 v, 2.5 m 656494235 uk/ireland, 13 a/230 v, 2.5 m 656494250 india, 10 a/220-250 v, 2.5 m 656494245 isreal, 10 a/220-230 v, 2.5 m 656494230 japan, 12 a/100 v, 2.3 m 656494240 north america, 15 a/125 v, 2.0 m 656458203 north america, 10 a/230 v, 2.5 m 656494255 ordering information for research use only. not for use in diagnostic procedures. this information is subject to change without notice. ? agilent technologies, inc. 2017 published in usa, march 24, 2017 5991-7603en north and south america agilent technologies 121 hartwell avenue, lexington ma 02421, usa tel: +1 781 861 7200 fax: +1 781 860 5437 toll free: +1 800 882 7426 vpl-customerservice@agilent.com europe and other countries agilent technologies italia spa via f.lli varian 54, 10040 leini, (torino), italy tel: +39 011 9979 111 fax: +39 011 9979 350 toll free: 00 800 234 234 00 vpt-customerservice@agilent.com 0 2 4 6 8 10 12 1.0e-02 1.0e-01 1.0e+00 inlet pressure (torr) 1.0e+01 1.0e+02 1.0e+03 pumping speed (m 3 /h) 1900 rpm n 2 speed (m 3 /h) factory set at 63.3 hz 1450 rpm n 2 speed (m 3 /h) (approximately 50 hz) 1600 rpm n 2 speed (m 3 /h) (approximately 55 hz) 1350 rpm n 2 speed (m 3 /h) (approximately 45 hz) IDP-10 air/n 2 pumping speed
|
