notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com the big deal ? low insertion loss ? high rejection ? connectorized package ZX75-2R15+ key features diplexer product overview ZX75-2R15+ is a low-pass + high-pass combination device. low pass port is designed for dc to 20 mhz and high pass port is designed for 950 to 2150 mhz. this diplexer is used to pass if, pilot carrier or clock synchronizing signal. this diplexer can also be used in automotive electronics, satellite systems, point-to- point radios, and multiband radio systems. feature advantages low passband insertion loss suitable for high performance application. extended stopband rejection spurious rejection and avoids using additional flters. connectorized package the connectorized package is easy to interface with other devices and well suited for test setups. 50 ? dc to 2150 mhz page 1 of 3 case style: fl905 coaxial (dc-20, 950-2150 mhz)
50 ? dc to 2150 mhz (dc-20, 950-2150 mhz) maximum ratings coaxial ZX75-2R15+ diplexer applications ? satellite systems ? automotive electronics ? ponit-to-point radios electrical specifcations at 25c features ? low insertion loss ? 50 ? impedance v odpcvph.yrcuucpfijrcuunvgtu ? connectorized package case style: fl905 pin connections typical performance data at 25 c permanent damage may occur if any of these limits are exceeded. these ratings are not intended for continuous normal operation notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com rev.a m151121 ZX75-2R15+ edu1424 urj 150513 page 2 of 3 functional schematic outline dimensions ( ) inch mm outline drawing a b c d e f g .74 .90 .54 .50 .04 .16 .29 18.80 22.86 13.72 12.70 1.02 4.06 7.37 h j k l m n wt .37 -- .122 .496 .106 .122 grams 9.40 -- 3.10 12.60 2.69 3.10 20.0 operating temperature -40c to 85c storage temperature -55c to 100c rf power input 1w at 25c parameter port frequency (mhz) min. typ. max. unit pass band insertion loss low pass dc-20 - 0.4 1.0 db high pass 950-2150 - 0.5 1.0 return loss low pass dc-20 18 26 - db high pass 950-2150 26 - common dc-20 18 26 - 950-2150 24 - stop band isolation low pass 70-2500 20 30 - db 950-2150 - 49 - high pass dc-320 20 30 - db dc-20 - 91 - 98-fl rev.: d (11/08/07) m114353 file: 98-fl.doc sheet 1 of 1 this document and its contents are the property of mini-circuits. case style fl notes: 1. case material: brass. 2. case finish: nickel plate. case #.abcde fgh j klmn wt, gram fl905 .74 (18.80) .90 (22.86) .54 (13.72) .50 (12.70) .04 (1.02) .16 (4.06) .29 (7.37) .37 (9.40) - - .122 (3.10) .496 (12.60) .106 (2.69) .122 (3.10) 20.0 dimensions are in inches (mm). tolerances: 2pl. .03; 3pl. .015. tolerance on hole size and interaxes dimensions to be .005. outline dimensions fl905 frequency (mhz) insertion loss (db) return loss (db) low pass port high pass port common port low pass port high pass port 0.5 0.23 100.08 31.94 32.19 0.00 20.0 0.39 97.64 29.34 32.49 0.00 30.0 0.72 97.31 15.97 17.45 0.00 40.0 4.11 92.55 3.53 3.74 0.00 50.0 13.60 86.89 0.74 0.87 0.00 70.0 30.49 82.31 0.27 0.36 0.01 110.0 66.66 77.18 0.14 0.18 0.01 200.0 54.57 53.30 0.08 0.08 0.05 320.0 55.29 31.09 0.10 0.05 0.16 450.0 56.26 14.56 0.36 0.04 0.54 500.0 57.34 9.60 0.81 0.04 1.05 550.0 59.16 5.64 1.88 0.04 2.17 600.0 61.76 2.95 3.95 0.05 4.27 650.0 63.92 1.48 7.01 0.05 7.32 700.0 63.58 0.79 10.71 0.05 10.96 950.0 60.10 0.23 30.09 0.06 30.96 1250.0 58.01 0.19 25.95 0.08 27.60 1500.0 55.59 0.18 25.49 0.09 26.46 2000.0 58.34 0.19 31.74 0.11 33.20 2150.0 55.86 0.18 31.24 0.13 31.97 2300.0 54.23 0.19 29.08 0.18 29.15 2500.0 56.12 0.21 25.28 0.23 25.02 connectors model sma ZX75-2R15-s+ high pass port 1 low pass port 2 common port 3 +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
ZX75-2R15+ low pass port insertion loss (p in =0dbm) 0 10 20 30 40 50 60 70 1 10 100 1000 10000 frequency (mhz) insertion loss (db) ZX75-2R15+ high pass port insertion loss (p in =0dbm) 0 20 40 60 80 100 1 10 100 1000 10000 frequency (mhz) insertion loss (db) ZX75-2R15+ common port return loss (p in =0dbm) 0 10 20 30 40 1 10 100 1000 10000 frequency (mhz) return loss (db) ZX75-2R15+ low pass port return loss (p in =0dbm) 0 5 10 15 20 25 30 35 1 10 100 1000 10000 frequency (mhz) return loss (db) ZX75-2R15+ high pass port return loss (p in =0dbm) 0 5 10 15 20 25 30 35 1 10 100 1000 10000 frequency (mhz) return loss (db) notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com ZX75-2R15+ performance charts page 3 of 3
|
