APD160 document number: ds36972 rev. 3 - 2 1 of 10 www.diodes.com july 2014 ? diodes incorporated a pd160 schottky barrier rectifier product summary v rrm (v) i o (a) v f (max) (v) @ +25c i r (max) (ma) @ +25c 60 1 0.68 0.5 description the APD160 is a low voltage dual schottky rectifier suited for switch mode power supplies and other power converters. this device is intended for use in medium voltage operation, and particularly, in high frequency circuits where low switching losses and low noise are required. the APD160 is available in standard do-214ac, do-41 and r-1 packages. applications ? low voltage high frequency inverters ? dc-dc converters ? free wheeling ? polarity protection features ? low forward voltage: 0.68v @ +25 c ? very small conduction losses ? high surge capability surge overload rating to 35a peak ? +125 c operating junction temperature ? 1a total ? guard-ring for stress protection ? pb-free package is available ? r-1 and do-41 ? lead-free finish; rohs compliant (notes 1 & 2) ? available in ?green? packages: do-214ac, r-1 and do-41 ? lead-free finish; rohs compliant (notes 1 & 2) ? halogen and antimony free. ?green? device (note 3) mechanical data ? case: do-214ac, do-41, r-1 ? case material: molded plastic, ?green? molding compound. ul flammability classification rating 94v-0 ? moisture sensitivity: level 1 per j-std-020 ? terminals: finish - matte ti n annealed over copper leadframe. solderable per mil-std-202, method 208 ? weight ? do-41 ? 0.33grams (approximately) ? do-214ac ? 0.062grams (approximately) ? r-1 ? 0.2grams (approximately) do-41 r-1 do-214ac notes: 1. eu directive 2002/95/ec (rohs) & 2011/65/eu (roh s 2) compliant. all applicable rohs exemptions applied. 2. see http://www.diodes.com/quality/lead_free.html for more in formation about diodes incorporated?s definitions of halogen- a nd antimony-free, "green" and lead-free. 3. halogen- and antimony-free "green? products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total br + cl) and <1000ppm antimony compounds. pin assignments (top view) (top view) do-41 / r-1 do-214ac cathode anode cathode anode
APD160 document number: ds36972 rev. 3 - 2 2 of 10 www.diodes.com july 2014 ? diodes incorporated a pd160 ? green ? green ? green ? green ? green ordering information (note 4) note 4:. diodes ic's pb-free produc ts, as designated with "e1" suffix in th e part number, are rohs compliant. products wit h "g1" suffix are available in green packages. package temperature range part number marking id packing do-41 -65 to +125 c APD160vd-e1 d160vd 1000/bulk do-41 -65 to +125 c APD160vd-g1 160vdg 1000/bulk do-41 -65 to +125 c APD160vdtr-e1 d160vd 2500/ammo do-41 -65 to +125 c APD160vdtr-g1 160vdg 2500/ammo r-1 -65 to +125 c APD160vh-e1 d160vh 1000/bulk r-1 -65 to +125 c APD160vh-g1 160vhg 1000/bulk r-1 -65 to +125 c APD160vhtr-e1 d160vh 2500/ammo r-1 -65 to +125 c APD160vhtr-g1 160vhg 2500/ammo do-214ac -65 to +125 c APD160vrtr-g1 160vrg 7500/tape & reel marking information (1) do-214ac (top view) pb pb pb pb ywwa xxxxxx first line: logo and date code y: year ww: work week of molding a: assembly house code second line: marking id (see ordering information)
APD160 document number: ds36972 rev. 3 - 2 3 of 10 www.diodes.com july 2014 ? diodes incorporated a pd160 marking information (cont.) (2) do-41 (top view) (3) r-1 (top view) first line: logo and date code y: year ww: work week of molding a: assembly house code second line: marking id (see ordering information) ywwa xxxxxx first line: marking id (see ordering information) xxxxxx
APD160 document number: ds36972 rev. 3 - 2 4 of 10 www.diodes.com july 2014 ? diodes incorporated a pd160 maximum ratings (t a = +25 o c, unless otherwise noted.) (note 5) characteristic symbol rating unit maximum repetitive peak reverse voltage v rrm 60 v maximum dc blocking voltage v dc 60 v maximum rms voltage v rms 42 v average rectified forward current 0.375? (9.5mm) lead length i f(av) 1.0 a non-repetitive peak forward surge current 8.3ms single half sine-wave on rated load i fsm 35 a operating junction temperature range (note 6) t j -65 to +125 c storage temperature range t stg -65 to +150 c notes: 5. stresses greater than those listed under ?abs olute maximum ratings? may cause permanent damage to the device. th ese are stress ratings only, and functional operation of the device at these or any other conditions beyond those in dicated under ?recommended operating conditi ons? is not implied. exposure to ?absolute maximum ratings? for extended periods may affect device reliability. 6. the heat generated must be less than the thermal conductivity from junction to ambient: dp d /dt j < 1/ ja . thermal characteristics (t a = +25 o c, unless otherwise noted.) characteristic symbol rating unit typical thermal resistance (note 7) r ja do-41 80 c/w r-1 80 do-214ac 100 note 7: device mounted on heat sink, with minimum recommended pad layout per http://www.diodes.com electrical characteristics (t a = +25 o c, unless otherwise noted.) characteristic symbol min typ max unit test condition forward voltage @ i f = 1.0a v f ? 0.68 ? v ? reverse current @ rated v r (note 8) i r ? 0.5 ? ma t a = +25 c ? 10 ? t a = +100 c note 8: short duration pulse test us ed to minimize self-heating effect, pulse test: 300 s pulse width, 1.0% duty cycle.
APD160 document number: ds36972 rev. 3 - 2 5 of 10 www.diodes.com july 2014 ? diodes incorporated a pd160 1 10 100 10 20 30 40 peak forward surge current (a) number of cycle at 60hz 0 102030405060708090100 0.1 1 10 100 1000 10000 instantaneous reverse current ( a) percent of instantaneous reverse voltage ( %) +25 0 c +125 0 c 110 10 60 40 400 junction capacitance (pf) reverse voltage (v) 91 figure 1. forward current derating curve figure 2. typical instantaneous forward characteristics figure 3. maximum non-repetitive surge current figure 4. typical reverse characteristics figure 5. typical junction capacitance 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 0.01 0.1 1 10 +25 0 c +125 0 c instantaneous forward current (a) instantaneous forward voltage (v) 0 20 40 60 80 100 120 140 160 0.0 0.5 1.0 1.5 2.0 note 7 i f(av) , average rectified forward current (a) t a , ambient temperaure ( o c)
APD160 document number: ds36972 rev. 3 - 2 6 of 10 www.diodes.com july 2014 ? diodes incorporated a pd160 package outline dimensions (all dimensions in mm(inch).) (1) package type: do-41 0. 700(0. 028) 0. 900(0. 035) 25. 400(1.000) min 4. 200(0. 165) 5. 200(0. 205) 2. 000(0. 080) 2. 700(0. 107) dia. dia. 25. 400(1.000) min cathode line by marking
APD160 document number: ds36972 rev. 3 - 2 7 of 10 www.diodes.com july 2014 ? diodes incorporated a pd160 package outline dimensions (cont. all dimensions in mm(inch).) (2) package type: r-1
APD160 document number: ds36972 rev. 3 - 2 8 of 10 www.diodes.com july 2014 ? diodes incorporated a pd160 package outline dimensions (cont. all dimensions in mm(inch).) (3) package type: do-214ac 2.400(0.094) 2.830(0.111) 1.250(0.049) 1.650(0.065)
APD160 document number: ds36972 rev. 3 - 2 9 of 10 www.diodes.com july 2014 ? diodes incorporated a pd160 suggested pad layout (1) package type: do-214ac g x x1 y dimensions y (mm)/(inch) x1 (mm)/(inch) g (mm)/(inch) x (mm)/(inch) value 2.100/0.083 2.000/0.079 1.600/0.063 5.600/0.220
APD160 document number: ds36972 rev. 3 - 2 10 of 10 www.diodes.com july 2014 ? diodes incorporated a pd160 important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability ari sing out of the application or use of this document or any product described herein; neither does diodes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or user of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability w hatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. this document is written in english but may be translated into multiple languages for reference. only the english version of t his document is the final and determinative format released by diodes incorporated. life support diodes incorporated products are specifically not authorized for use as critical com ponents in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support devic e or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2014, diodes incorporated www.diodes.com
|
