pin silicon photodiode op905, OP906 ? tt electronics plc issue a 08/2016 page 1 optek technology, inc. 1645 wallace drive, carrollton, tx 75006|ph: +1 972 323 2200 www.optekinc.com | www.ttelectronics.com general note tt electronics reserves the right to make changes in product speci?cation without notice or liability. all information is subject to tt electronics own data and is considered accurate at time of going to print. description: each op905 and OP906 device consists of a pin silicon photodiode molded in a clear epoxy package that allows spectral response from visible to infrared light wavelengths. the t-1 package style is idea l for space-limited applica ons. both devices have a narrow receiving angle, which provides ex cellent on-axis coupling. both are also 100% produc on tested using infrared light for close correla on with optek?s gaas and gaaias emi ers. please refer to applica ? on bulle ? ns 208 and 210 for addi ? onal design informa ? on and reliability (degrada ? on) data. applications: ? non-contact re ec ve object sensor ? assembly line automa on ? machine automa on ? machine safety ? end of travel sensor ? door sensor features: ? clear epoxy package ? linear response vs. irradiance ? fast switching me ? narrow receiving angle ? t-1package style ? small package style ideal for space-limited applica ons op905 OP906 part number sensor viewing angle lead length op905 photodiode 95 0.50" OP906 ordering informa ? on OP906 contains polysulfone to avoid stress cracking, we suggest using nd industries? vibra-tite for thread-locking. vibra-tite evaporates fast without causing structural failure in optek's molded plas cs. op905 pin # diode 1 anode 2 cathode op905 - OP906 1 2 inches [millimeters] dimensions are in: inches [millimeters] dimensions are in: rohs
? tt electronics plc general note tt electronics reserves the right to make changes in product speci?cation without notice or liability. all information is subject to tt electronics own data and is considered accurate at time of going to print. pin silicon photodiode op905, OP906 issue a 08/2016 page 2 optek technology, inc. 1645 wallace drive, carrollton, tx 75006|ph: +1 972 323 2200 www.optekinc.com | www.ttelectronics.com absolute maximum ratings (t a = 25 c unless otherwise noted) reverse breakdown voltage 60 v storage & opera ng temperature range -40 c to +100 c lead soldering temperature [1/16 in ch (1.6mm) from the case for 5 se c. with soldering iron] 260 c (1) reverse breakdown voltage 60 v power dissipa on 100 mw (2) electrical speci?cations electrical characteristics (t a = 25 c unless otherwise noted) symbol parameter min typ max units test conditions i l reverse light current op905 OP906 14 16 - - 32 35 a v r = 5 v, e e = 0.50 mw/cm 2 (3) i d reverse dark current - 1 60 na v r = 30 v, e e = 0 (4) v (br) reverse breakdown voltage 60 - - v i r = 100 a v f forward voltage - - 1.2 v i f = 1 ma c t total capacitance - 4 - pf v r = 20 v, e e = 0, f = 1.0 mhz t r rise time - 5 - ns t f fall time - 5 - v r = 20 v, = 850 nm, r l = 50 notes: (1) rma ux is recommended. dura on can be extended to 10 seconds maximum when ow soldering. a maximum of 20 grams force may be applied to leads when soldering. (2) derate linearly 1.67 mw/ c above 25 c. (3) light source is an un ltered gaas led with a peak emission wavelength of 935 nm and a radiometric intensity level which varies less than 10% over the en re lens surface of the photodiode being tested. (4) calculate the typical dark cu rrent in na using the formula i d = 10 (0.042t a -1.5) where t a is ambient temperature in c.
? tt electronics plc general note tt electronics reserves the right to make changes in product speci?cation without notice or liability. all information is subject to tt electronics own data and is considered accurate at time of going to print. pin silicon photodiode op905, OP906 issue a 08/2016 page 3 optek technology, inc. 1645 wallace drive, carrollton, tx 75006|ph: +1 972 323 2200 www.optekinc.com | www.ttelectronics.com performance op905
? tt electronics plc general note tt electronics reserves the right to make changes in product speci?cation without notice or liability. all information is subject to tt electronics own data and is considered accurate at time of going to print. pin silicon photodiode op905, OP906 issue a 08/2016 page 4 optek technology, inc. 1645 wallace drive, carrollton, tx 75006|ph: +1 972 323 2200 www.optekinc.com | www.ttelectronics.com performance OP906
|
