bas40-00 to bas40-06 www.vishay.com vishay semiconductors rev. 2.0, 25-feb-13 1 document number: 85701 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 small signal schottky diodes, single and dual features ? these diodes feature very low turn-on voltage and fast switching ? these devices are protected by a pn junction guardring against excessive voltage, such as electrostatic discharges ? aec-q101 qualified ? base p/n-e3 - rohs-compliant, commercial grade ? base p/n-he3 - rohs-compliant, aec-q101 qualified ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 mechanical data case: sot-23 weight: approx. 8.8 mg packaging codes/options: 18/10k per 13" reel (8 mm tape), 10k/box 08/3k per 7" reel (8 mm tape), 15k/box note (1) device on fiberglass substrate, see layout on next page. note (1) device on fiberglass substrate, see layout on next page. 1 2 3 1 2 3 1 2 3 1 2 3 top view top view ba s 40-05 ba s 40-06 ba s 40-04 ba s 40-00 parts table part ordering code internal co nstruction type marking remarks bas40-00 BAS40-00-E3-08 or bas40-00-e3-18 single diode 43 tape and reel bas40-00-he3-08 or bas40-00-he3-18 bas40-04 bas40-04-e3-08 or bas40-04-e3-18 dual diodes serial 44 bas40-04-he3-08 or bas40-04-he3-18 bas40-05 bas40-05-e3-08 or bas40-05-e3-18 dual diodes common cathode 45 bas40-05-he3-08 or bas40-05-he3-18 bas40-06 bas40-06-e3-08 or bas40-06-e3-18 dual diodes common anode 46 bas40-06-he3-08 or bas40-06-he3-18 absolute maximum ratings (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit repetitive peak reverse voltage v rrm = v rwm = v r 40 v forward continuous current (1) i f 200 ma surge forward current (1) t p < 1 s i fsm 600 ma power dissipation (1) p tot 200 mw thermal characteristics (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit thermal resistance junction to ambient air (1) r thja 500 k/w junction temperature t j 125 c storage temperature range t stg - 65 to + 150 c operating temperature range t op - 55 to + 125 c
bas40-00 to bas40-06 www.vishay.com vishay semiconductors rev. 2.0, 25-feb-13 2 document number: 85701 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) pulse test t p < 300 s layout for r thja test thickness: fiberglass 1.5 mm (0.059 inches) copper leads 0.3 mm (0.012 inches) package dimensions in millimeters (inches): sot-23 electrical characteristics (t amb = 25 c, unless otherwise specified) parameter test condition symbol min. typ. max. unit reverse breakdown voltage i r = 10 a (pulsed) v (br) 40 v leakage current v r = 30 v i r 20 100 na forward voltage i f = 1 ma v f 380 mv forward voltage (1) i f = 40 ma v f 1000 mv diode capacitance v r = 0 v, f = 1 mhz c d 45pf reverse recovery time i f = i r = 10 ma, i r = 1 ma, r l = 100 ? t rr 5ns 17451 15 (0.59) 12 (0.47) 0.8 (0.03) 5 (0.2) 7.5 (0.3) 3 (0.12) 1 (0.4) 1 (0.4) 2 (0.8) 2 (0.8) 1.5 (0.06) 5.1 (0.2) foot print recommendation: rev. 8 - date: 23. s ept.2009 17418 document no.: 6.541-5014.01-4 0.9 (0.035) 1 (0.039) 0.9 (0.035) 1 (0.039) 1.43 (0.056) 0.45 (0.018) 0.35 (0.014) 2.8 (0.110) 3.1 (0.122) 0.45 (0.018) 0.35 (0.014) 0.45 (0.018) 0.35 (0.014) 0.1 (0.004) max. 2.35 (0.093) 2.6 (0.102) 0.175 (0.007) 0.098 (0.004) 1.15 (0.045) 0.9 (0.035) 1.20 (0.047) 0.95 (0.037) 0.95 (0.037) 2 (0.079) 0.7 (0.028) 0.9 (0.035) 0 to 8 0.2 (0.008) 0.3 (0.012) 0.5 (0.020) 0.550 ref. (0.022 ref.)
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|