View XHP70B-00-0000-0D0HN20E3_8943120.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

cld-ds170 rev 2 cree ? xlamp ? xhp70.2 leds pro duc t d escrip tion the xlamp xhp70.2 l e d is the next generation of e xtreme high power leds that delivers the lowest system cost through the best lumen density, reliability and color consistency. built on crees latest high - power le d technology, the xhp70.2 l e d improves the lumen density, voltage characteristics, reliability and optical performance of the xhp70 l ed in the same 7.0?mm x 7.0?mm footprint. the new xhp70.2 l e d provides an easy drop-in upgrade to achieve higher system lpw for lighting manufacturers with existing xhp70 designs, eliminating redesign costs. its unparalleled lumen density and longer lifetime at higher operating temperatures also enable new and innovative lighting designs at lower system costs. fea tures ? available in white, confgurable to 6?v or 12?v by pcb layout ? available in 5-step easywhite ? bins at 3000?k to 5000?k cct, 3-step easywhite bins at 2700?k to 5000?k and 2-step easywhite bins at 2700?k to 4000?k cct ? available in ansi white bins at 3000?k to 7000?k cct ? available in standard, 70-, 80-, and 90-minimum cri options ? binned at 85?c ? maximum drive current: 4800?ma (6?v), 2400?ma (12?v) ? low thermal resistance: 0.9?c/w ? wide viewing angle: 125 ? unlimited foor life at 30?oc/85% rh ? refow solderable - jedec j-std-020c ? rohs and re ach compliant ? ul ? recognized component (e349212) ta ble o f cont e nts characteristics .............................................. 2 flux characteristics, easywhite ? order codes and bins ............................................. 3 flux characteristics, ansi white order codes and bins ............................................. 5 relative spectral power distribution ........... 7 relative flux vs. junction temperature ....... 7 e lectrical characteristics .............................. 8 relative flux vs. current ............................... 9 relative chromaticity vs current ............... 10 relative chromaticity vs temperature ...... 11 typical spatial distribution ........................ 11 thermal design .......................................... 12 performance groups - luminous flux ...... 13 performance groups - chromaticity ......... 13 crees standard white chromaticity regions plotted on the cie 1931 curve .... 17 crees standard cool white kits plotted on ansi standard chromaticity regions .. 20 crees standard warm and neutral white kits plotted on ansi standard chromaticity regions ................................ 21 bin and order-code format ....................... 22 refow soldering characteristics .............. 23 notes .......................................................... 24 mechanical dimensions ............................ 26 electrical confguration ............................. 27 tape and reel ............................................. 28 packaging ................................................... 29 product family data sheet copyright ? 2017-2018 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. other trademarks, product, and company names are the property of their respective owners and do not imply specifc product and/or vendor endorsement, sponsorship or association. cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 www.cree.com/xlamp
2 c har ac teristics xhp70.2 leds are tested and binned in the 12 - v confguration. see the mechanical dimensions section on page 26 for pad layout options. characteristics unit minimum t ypical maximum thermal resistance, junction to solder point c/w 0.9 viewing angle (fwhm) degrees 125 temperature coeffcient of voltage (6?v)* mv/c -2.9 temperature coeffcient of voltage (12?v) mv/c -5.8 esd withstand voltage (hbm per mil-std-883d) v 8000 dc forward current (6?v)* ma 4800 dc forward current (12?v) ma 2400 reverse voltage v 5 forward voltage (6?v, @ 2100?ma, 85?c)* v 5.6 6.1 forward voltage (12?v, @ 1050?ma, 85?c) v 11.2 12.2 le d junction temperature c 150 note: * data for the 6- v confguration is calculated and for reference only. copyright ? 2017-2018 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. other trademarks, product, and company names are the property of their respective owners and do not imply specifc product and/or vendor endorsement, sponsorship or association. xlamp ? xh p 70.2 led
notes ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and a tolerance of 2 on cri measurements. see the measurements section (page 24). ? cree xlamp xhp70.2 led order codes specify only a minimum fux bin and not a maximum. cree may ship reels in fux bins higher than the minimum specifed by the order code without advance notice. shipments will always adhere to the chromaticity bin restrictions specifed by the order code. * flux values @ 25 c are calculated and for reference only. 3 fl ux c har ac teristic s, ea sywh ite ? o rde r code s and bins the following table provides order codes for xlamp xhp70.2 leds. for a complete description of how the fux and chromaticity groups are refected in the bin code and order code nomenclature, please see the bin and order code formats section (page 22). binning condition: t j = 85?c; 12?v, i f = 1050?ma reference condition: t j = 85?c; 6?v, i f = 2100?ma nominal cc t cri minimum luminous flux 2-step 3-step 5-step min t yp group flux (lm) @ 85?c flux (lm) @ 25?c* group o rder code group o rder code group o rder code 5000?k 70 p2 1830 2015 50e xhp70b-00-0000- 0d0bp250e n4 1710 1883 xhp70b-00-0000- 0d0bn450e 80 n2 1590 1751 50g xhp70b-00-0000- 0d0hn250g m4 1485 1635 xhp70b-00-0000- 0d0hm450g 90 m4 1485 1635 50g xhp70b-00-0000- 0d0um450g m2 1380 1520 xhp70b-00-0000- 0d0um250g 4500?k 70 p2 1830 2015 45e xhp70b-00-0000- 0d0bp245e n4 1710 1883 xhp70b-00-0000- 0d0bn445e 80 n2 1590 1751 45g xhp70b-00-0000- 0d0hn245g m4 1485 1635 xhp70b-00-0000- 0d0hm445g 90 m2 1380 1520 45g xhp70b-00-0000- 0d0um245g k4 1290 1420 xhp70b-00-0000- 0d0uk445g 4000?k 70 p2 1830 2015 40e xhp70b-00-0000- 0d0bp240e n4 1710 1883 xhp70b-00-0000- 0d0bn440e 80 n2 1590 1751 40h xhp70b-00-0000- 0d0hn240h 40g xhp70b-00-0000- 0d0hn240g m4 1485 1635 xhp70b-00-0000- 0d0hm440h xhp70b-00-0000- 0d0hm440g 90 m2 1380 1520 40h xhp70b-00-0000- 0d0um240h 40g xhp70b-00-0000- 0d0um240g k4 1290 1420 xhp70b-00-0000- 0d0uk440h xhp70b-00-0000- 0d0uk440g copyright ? 2017-2018 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. other trademarks, product, and company names are the property of their respective owners and do not imply specifc product and/or vendor endorsement, sponsorship or association. xlamp ? xh p 70.2 led
notes ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and a tolerance of 2 on cri measurements. see the measurements section (page 24). ? cree xlamp xhp70.2 led order codes specify only a minimum fux bin and not a maximum. cree may ship reels in fux bins higher than the minimum specifed by the order code without advance notice. shipments will always adhere to the chromaticity bin restrictions specifed by the order code. * flux values @ 25 c are calculated and for reference only. 4 nominal cc t cri minimum luminous flux 2-step 3-step 5-step min t yp group flux (lm) @ 85?c flux (lm) @ 25?c* group o rder code group o rder code group o rder code 3500?k 70 n4 1710 1883 35e xhp70b-00-0000- 0d0bn435e n2 1590 1751 xhp70b-00-0000- 0d0bn235e 80 n2 1590 1751 35h xhp70b-00-0000- 0d0hn235h 35g xhp70b-00-0000- 0d0hn235g m4 1485 1635 xhp70b-00-0000- 0d0hm435h xhp70b-00-0000- 0d0hm435g 90 m2 1380 1520 35h xhp70b-00-0000- 0d0um235h 35g xhp70b-00-0000- 0d0um235g k4 1290 1420 xhp70b-00-0000- 0d0uk435h xhp70b-00-0000- 0d0uk435g 3000?k 70 n4 1710 1883 30e xhp70b-00-0000- 0d0bn430e n2 1590 1751 xhp70b-00-0000- 0d0bn230e 80 n2 1590 1751 30h xhp70b-00-0000- 0d0hn230h 30g xhp70b-00-0000- 0d0hn230g m4 1485 1635 xhp70b-00-0000- 0d0hm430h xhp70b-00-0000- 0d0hm430g 90 k4 1290 1420 30h xhp70b-00-0000- 0d0uk430h 30g xhp70b-00-0000- 0d0uk430g k2 1200 1321 xhp70b-00-0000- 0d0uk230h xhp70b-00-0000- 0d0uk230g 2700?k 80 m4 1485 1635 27h xhp70b-00-0000- 0d0hm427h 27g xhp70b-00-0000- 0d0hm427g m2 1380 1520 xhp70b-00-0000- 0d0hm227h xhp70b-00-0000- 0d0hm227g 90 k2 1200 1321 27h xhp70b-00-0000- 0d0uk227h 27g xhp70b-00-0000- 0d0uk227g j4 1120 1233 xhp70b-00-0000- 0d0uj427h xhp70b-00-0000- 0d0uj427g fl ux c har ac teristic s, ea sywh ite ? o rde r code s and b ins - continued copyright ? 2017-2018 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. other trademarks, product, and company names are the property of their respective owners and do not imply specifc product and/or vendor endorsement, sponsorship or association. xlamp ? xh p 70.2 led
notes ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and a tolerance of 2 on cri measurements. see the measurements section (page 24). ? cree xlamp xhp70.2 led order codes specify only a minimum fux bin and not a maximum. cree may ship reels in fux bins higher than the minimum specifed by the order code without advance notice. shipments will always adhere to the chromaticity bin restrictions specifed by the order code. * flux values @ 25 c are calculated and for reference only. 5 fl ux c har ac teristic s, ansi wh ite o rde r code s and bins the following table provides order codes for xlamp xhp70.2 leds. for a complete description of how the fux and chromaticity groups are refected in the bin code and order code nomenclature, please see the bin and order code formats section (page 22). binning condition: t j = 85?c; 12?v, i f = 1050?ma reference condition: t j = 85?c; 6?v, i f = 2100?ma nominal cc t chromaticity regions cri minimum luminous flux o rder code min t yp group flux (lm) @ 85?c flux (lm) @ 25?c* 7000?k 0a, 0b, 0c, 0d, 0r, 0s, 0t, 0u, 1a, 1b, 1c, 1d, 1r, 1s, 1t, 1u 0 68 n4 1710 1883 xhp70b-00-0000-0d00n40dt n2 1590 1751 xhp70b-00-0000-0d00n20dt 70 n4 1710 1883 xhp70b-00-0000-0d0bn40dt n2 1590 1751 xhp70b-00-0000-0d0bn20dt 80 n2 1590 1751 xhp70b-00-0000-0d0hn20dt m4 1485 1635 xhp70b-00-0000-0d0hm40dt 6500?k 1a, 1b, 1c, 1d 0 68 n4 1710 1883 xhp70b-00-0000-0d00n40e1 n2 1590 1751 xhp70b-00-0000-0d00n20e1 70 n4 1710 1883 xhp70b-00-0000-0d0bn40e1 n2 1590 1751 xhp70b-00-0000-0d0bn20e1 80 n2 1590 1751 xhp70b-00-0000-0d0hn20e1 m4 1485 1635 xhp70b-00-0000-0d0hm40e1 6000?k 1a, 1b, 1c, 1d, 1r, 1s, 1t, 1u, 2a, 2b, 2c, 2d, 2r, 2s, 2t, 2u 0 68 p2 1830 2015 xhp70b-00-0000-0d00p20d v n4 1710 1883 xhp70b-00-0000-0d00n40d v 70 p2 1830 2015 xhp70b-00-0000-0d0bp20d v n4 1710 1883 xhp70b-00-0000-0d0bn40d v 80 n2 1590 1751 xhp70b-00-0000-0d0hn20d v m4 1485 1635 xhp70b-00-0000-0d0hm40d v 90 m4 1485 1635 xhp70b-00-0000-0d0um40d v m2 1380 1520 xhp70b-00-0000-0d0um20d v 5700?k 2a, 2b, 2c, 2d 0 68 p2 1830 2015 xhp70b-00-0000-0d00p20e2 n4 1710 1883 xhp70b-00-0000-0d00n40e2 70 p2 1830 2015 xhp70b-00-0000-0d0bp20e2 n4 1710 1883 xhp70b-00-0000-0d0bn40e2 80 n2 1590 1751 xhp70b-00-0000-0d0hn20e2 m4 1485 1635 xhp70b-00-0000-0d0hm40e2 90 m4 1485 1635 xhp70b-00-0000-0d0um40e2 m2 1380 1520 xhp70b-00-0000-0d0um20e2 copyright ? 2017-2018 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. other trademarks, product, and company names are the property of their respective owners and do not imply specifc product and/or vendor endorsement, sponsorship or association. xlamp ? xh p 70.2 led
notes ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and a tolerance of 2 on cri measurements. see the measurements section (page 24). ? cree xlamp xhp70.2 led order codes specify only a minimum fux bin and not a maximum. cree may ship reels in fux bins higher than the minimum specifed by the order code without advance notice. shipments will always adhere to the chromaticity bin restrictions specifed by the order code. * flux values @ 25 c are calculated and for reference only. 6 nominal cc t chromaticity regions cri minimum luminous flux o rder code min t yp group flux (lm) @ 85?c flux (lm) @ 25?c* 5000?k 3a, 3b, 3c, 3d 0 68 p2 1830 2015 xhp70b-00-0000-0d00p20e3 n4 1710 1883 xhp70b-00-0000-0d00n40e3 70 p2 1830 2015 xhp70b-00-0000-0d0bp20e3 n4 1710 1883 xhp70b-00-0000-0d0bn40e3 80 n2 1590 1751 XHP70B-00-0000-0D0HN20E3 m4 1485 1635 xhp70b-00-0000-0d0hm40e3 90 m4 1485 1635 xhp70b-00-0000-0d0um40e3 m2 1380 1520 xhp70b-00-0000-0d0um20e3 4500?k 4a, 4b, 4c, 4d 0 68 p2 1830 2015 xhp70b-00-0000-0d00p20e4 n4 1710 1883 xhp70b-00-0000-0d00n40e4 70 p2 1830 2015 xhp70b-00-0000-0d0bp20e4 n4 1710 1883 xhp70b-00-0000-0d0bn40e4 80 n2 1590 1751 xhp70b-00-0000-0d0hn20e4 m4 1485 1635 xhp70b-00-0000-0d0hm40e4 90 m2 1380 1520 xhp70b-00-0000-0d0um20e4 k4 1290 1420 xhp70b-00-0000-0d0uk40e4 4000?k 5a, 5b, 5c, 5d 0 68 p2 1830 2015 xhp70b-00-0000-0d00p20e5 n4 1710 1883 xhp70b-00-0000-0d00n40e5 70 p2 1830 2015 xhp70b-00-0000-0d0bp20e5 n4 1710 1883 xhp70b-00-0000-0d0bn40e5 80 n2 1590 1751 xhp70b-00-0000-0d0hn20e5 m4 1485 1635 xhp70b-00-0000-0d0hm40e5 90 m2 1380 1520 xhp70b-00-0000-0d0um20e5 k4 1290 1420 xhp70b-00-0000-0d0uk40e5 3500?k 6a, 6b, 6c, 6d 70 n4 1710 1883 xhp70b-00-0000-0d0bn40e6 n2 1590 1751 xhp70b-00-0000-0d0bn20e6 3000?k 7a, 7b, 7c, 7d 70 n4 1710 1883 xhp70b-00-0000-0d0bn40e7 n2 1590 1751 xhp70b-00-0000-0d0bn20e7 fl ux c har ac teristic s, ansi wh ite o rde r code s and b ins - continued copyright ? 2017-2018 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. other trademarks, product, and company names are the property of their respective owners and do not imply specifc product and/or vendor endorsement, sponsorship or association. xlamp ? xh p 70.2 led
7 rela tive spec tral po we r distribution rela tive fl ux vs. jun c tion tempera ture reference condition: 6?v, i f = 2100?ma; 12?v, i f = 1050?ma relative spectral power 0% 20% 40% 60% 80% 100% 380 430 480 530 580 630 680 730 780 relative radiant power wavelength (nm) 6500 k, 68 cri 3000 k, 80 cri relative flux output vs. junction temperature 0% 20% 40% 60% 80% 100% 120% 25 50 75 100 125 150 relative luminous flux junction temperature (oc) copyright ? 2017-2018 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. other trademarks, product, and company names are the property of their respective owners and do not imply specifc product and/or vendor endorsement, sponsorship or association. xlamp ? xh p 70.2 led
8 elec trical c ha r ac teristic s ( t j = 85?c) 0 800 1600 2400 3200 4000 4800 5.00 5.25 5.50 5.75 6.00 forward current (ma) forward voltage (v) 6 v electrical characteristics (tj = 85c) 0 400 800 1200 1600 2000 2400 10.0 10.5 11.0 11.5 12.0 forward current (ma) forward voltage (v) 12 v copyright ? 2017-2018 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. other trademarks, product, and company names are the property of their respective owners and do not imply specifc product and/or vendor endorsement, sponsorship or association. xlamp ? xh p 70.2 led
9 rela tive fl ux vs. curr e nt ( t j = 85?c) 0% 20% 40% 60% 80% 100% 120% 140% 160% 180% 200% 0 800 1600 2400 3200 4000 4800 relative luminous flux forward current (ma) 6 v relative intensity vs. current (tj = 85c) 0% 20% 40% 60% 80% 100% 120% 140% 160% 180% 200% 0 400 800 1200 1600 2000 2400 relative luminous flux forward current (ma) 12 v copyright ? 2017-2018 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. other trademarks, product, and company names are the property of their respective owners and do not imply specifc product and/or vendor endorsement, sponsorship or association. xlamp ? xh p 70.2 led
10 rela tive chro ma tic ity vs curre nt (w arm wh ite ) -0.020 -0.016 -0.012 -0.008 -0.004 0.000 0.004 0.008 0.012 0.016 0.020 0 800 1600 2400 3200 4000 4800 current (ma) ccx ccy 6 v relative chromaticity vs. current, ww -0.020 -0.016 -0.012 -0.008 -0.004 0.000 0.004 0.008 0.012 0.016 0.020 0 400 800 1200 1600 2000 2400 current (ma) ccx ccy 12 v copyright ? 2017-2018 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. other trademarks, product, and company names are the property of their respective owners and do not imply specifc product and/or vendor endorsement, sponsorship or association. xlamp ? xh p 70.2 led
11 rela tive chro ma tic ity vs tempera ture (w arm wh ite ) reference condition: 6?v, i f = 2100?ma; 12?v, i f = 1050?ma t ypical spa ti al distribution reference condition: t j = 85?c; 6?v, i f = 2100?ma; 12?v, i f = 1050?ma relative chromaticity vs. temperature ww -0.020 -0.016 -0.012 -0.008 -0.004 0.000 0.004 0.008 0.012 0.016 0.020 25 50 75 100 125 150 tj ( c) ccx ccy typical spatial radiation pattern 0% 20% 40% 60% 80% 100% -90 -70 -50 -30 -10 10 30 50 70 90 relative luminous intensity angle (o) copyright ? 2017-2018 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. other trademarks, product, and company names are the property of their respective owners and do not imply specifc product and/or vendor endorsement, sponsorship or association. xlamp ? xh p 70.2 led
12 ther mal design the maximum forward current is determined by the thermal resistance between the l e d junction and ambient. it is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 0 20 40 60 80 100 120 140 160 maximum current (ma) ambient temperature (oc) rj-a = 1c/w rj-a = 2c/w rj-a = 3c/w rj-a = 4c/w 6 v thermal design 0 250 500 750 1000 1250 1500 1750 2000 2250 2500 0 20 40 60 80 100 120 140 160 maximum current (ma) ambient temperature (oc) rj-a = 1c/w rj-a = 2c/w rj-a = 3c/w rj-a = 4c/w 12 v copyright ? 2017-2018 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. other trademarks, product, and company names are the property of their respective owners and do not imply specifc product and/or vendor endorsement, sponsorship or association. xlamp ? xh p 70.2 led
13 perf or mance grou p s - lum inous fl ux ( t j ?=?85? c) xlamp xhp70.2 leds are tested for luminous fux and placed into one of the following luminous-fux groups. group code minimum luminous flux maximum luminous flux j4 1120 1200 k2 1200 1290 k4 1290 1380 m2 1380 1485 m4 1485 1590 n2 1590 1710 n4 1710 1830 p2 1830 1965 p4 1965 2100 perf or mance grou p s - chro ma tic ity xlamp xhp70.2 leds are tested for chromaticity and placed into one of the regions defned by the following bounding coordinates. easywhite color t emperatures C 2- step bin code cc t x y 40h 4000?k 0.3777 0.3739 0.3797 0.3816 0.3861 0.3855 0.3838 0.3777 35h 3500?k 0.4022 0.3858 0.4053 0.3942 0.4125 0.3977 0.4091 0.3891 30h 3000?k 0.4287 0.3975 0.4328 0.4064 0.4390 0.4086 0.4347 0.3996 27h 2700?k 0.4524 0.4048 0.4574 0.4140 0.4633 0.4154 0.4581 0.4062 copyright ? 2017-2018 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. other trademarks, product, and company names are the property of their respective owners and do not imply specifc product and/or vendor endorsement, sponsorship or association. xlamp ? xh p 70.2 led
14 perf or mance grou p s - chro ma tic ity ( c ontinued ) easywhite color t emperatures C 3- step ellipse bin code cc t center point major axis minor axis r otation angle () x y a b 50g 5000?k 0.3447 0.3553 0.00840 0.00312 65.0 45g 4500?k 0.3611 0.3658 0.00852 0.00330 61.5 40g 4000?k 0.3818 0.3797 0.00939 0.00402 53.7 35g 3500?k 0.4073 0.3917 0.00927 0.00414 54.0 30g 3000?k 0.4338 0.4030 0.00834 0.00408 53.2 27g 2700?k 0.4577 0.4099 0.00834 0.00420 48.5 easywhite color t emperatures C 5- step ellipse bin code cc t center point major axis minor axis r otation angle () x y a b 50e 5000?k 0.3447 0.3553 0.01400 0.00520 65.0 45e 4500?k 0.3611 0.3658 0.01420 0.00550 61.5 40e 4000?k 0.3818 0.3797 0.01565 0.00670 53.7 35e 3500?k 0.4073 0.3917 0.01545 0.00690 54.0 30e 3000?k 0.4338 0.4030 0.01390 0.00680 53.2 ansi white bins ansi white bins ansi white bins cc t bin code x y cc t bin code x y cc t bin code x y 7000 k 0a0 0.2950 0.2970 7000 k 0r0 0.2980 0.2880 7000 k 1a0 0.3048 0.3207 0.2920 0.3060 0.2950 0.2970 0.3130 0.3290 0.2984 0.3133 0.3009 0.3042 0.3144 0.3186 0.3009 0.3042 0.3037 0.2937 0.3068 0.3113 0b0 0.2920 0.3060 0s0 0.2895 0.3135 1b0 0.3028 0.3304 0.2895 0.3135 0.2870 0.3210 0.3115 0.3391 0.2962 0.3220 0.2937 0.3312 0.3130 0.3290 0.2984 0.3133 0.2962 0.3220 0.3048 0.3207 0c0 0.2984 0.3133 0t0 0.2962 0.3220 1c0 0.3115 0.3391 0.2962 0.3220 0.2937 0.3312 0.3205 0.3481 0.3028 0.3304 0.3005 0.3415 0.3213 0.3373 0.3048 0.3207 0.3028 0.3304 0.3130 0.3290 0d0 0.2984 0.3133 0u0 0.3037 0.2937 1d0 0.3130 0.3290 0.3048 0.3207 0.3009 0.3042 0.3213 0.3373 0.3068 0.3113 0.3068 0.3113 0.3221 0.3261 0.3009 0.3042 0.3093 0.2993 0.3144 0.3186 copyright ? 2017-2018 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. other trademarks, product, and company names are the property of their respective owners and do not imply specifc product and/or vendor endorsement, sponsorship or association. xlamp ? xh p 70.2 led
15 perf or mance grou p s - chro ma tic ity ( c ontinued ) ansi white bins ansi white bins ansi white bins cc t bin code x y cc t bin code x y cc t bin code x y 7000 k 1r0 0.3068 0.3113 6000?k 2a0 0.3215 0.3350 6000?k 2r0 0.3222 0.3243 0.3144 0.3186 0.3290 0.3417 0.3290 0.3300 0.3161 0.3059 0.3290 0.3300 0.3290 0.3180 0.3093 0.2993 0.3222 0.3243 0.3231 0.3120 1s0 0.3005 0.3415 2b0 0.3207 0.3462 2s0 0.3196 0.3602 0.3099 0.3509 0.3290 0.3538 0.3290 0.3690 0.3115 0.3391 0.3290 0.3417 0.3290 0.3538 0.3028 0.3304 0.3215 0.3350 0.3207 0.3462 1t0 0.3099 0.3509 2c0 0.3290 0.3538 2t0 0.3290 0.3690 0.3196 0.3602 0.3376 0.3616 0.3381 0.3762 0.3205 0.3481 0.3371 0.3490 0.3376 0.3616 0.3115 0.3391 0.3290 0.3417 0.3290 0.3538 1u0 0.3144 0.3186 2d0 0.3290 0.3417 2u0 0.3290 0.3300 0.3221 0.3261 0.3371 0.3490 0.3366 0.3369 0.3231 0.3120 0.3366 0.3369 0.3361 0.3245 0.3161 0.3059 0.3290 0.3300 0.3290 0.3180 ansi white bins ansi white bins cc t bin code x y cc t bin code x y 5000?k 3a0 0.3371 0.3490 4500?k 4a0 0.3530 0.3597 0.3451 0.3554 0.3615 0.3659 0.3440 0.3427 0.3512 0.3465 0.3366 0.3369 0.3515 0.3487 3b0 0.3376 0.3616 4b0 0.3548 0.3736 0.3463 0.3687 0.3641 0.3804 0.3451 0.3554 0.3530 0.3597 0.3371 0.3490 0.3533 0.362 3c0 0.3463 0.3687 4c0 0.3641 0.3804 0.3551 0.3760 0.3736 0.3874 0.3533 0.3620 0.3702 0.3722 0.3451 0.3554 0.3615 0.3659 3d0 0.3451 0.3554 4d0 0.3615 0.3659 0.3533 0.3620 0.3702 0.3722 0.3515 0.3487 0.3670 0.3578 0.3440 0.3427 0.3590 0.3521 copyright ? 2017-2018 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. other trademarks, product, and company names are the property of their respective owners and do not imply specifc product and/or vendor endorsement, sponsorship or association. xlamp ? xh p 70.2 led
16 perf or mance grou p s - chro ma tic ity ( c ontinued ) ansi white bins ansi white bins ansi white bins cc t bin code x y cc t bin code x y cc t bin code x y 4000?k 5a0 0.3670 0.3578 3500?k 6a0 0.3889 0.3690 3000?k 7a0 0.4147 0.3814 0.3702 0.3722 0.3941 0.3848 0.4221 0.3984 0.3825 0.3798 0.4080 0.3916 0.4342 0.4028 0.3783 0.3646 0.4017 0.3751 0.4259 0.3853 5b0 0.3702 0.3722 6b0 0.3941 0.3848 7b0 0.4221 0.3984 0.3736 0.3874 0.3996 0.4015 0.4299 0.4165 0.3869 0.3958 0.4146 0.4089 0.4430 0.4212 0.3825 0.3798 0.4080 0.3916 0.4342 0.4028 5c0 0.3825 0.3798 6c0 0.4080 0.3916 7c0 0.4342 0.4028 0.3869 0.3958 0.4146 0.4089 0.4430 0.4212 0.4006 0.4044 0.4299 0.4165 0.4562 0.4260 0.3950 0.3875 0.4221 0.3984 0.4465 0.4071 5d0 0.3783 0.3646 6d0 0.4017 0.3751 7d0 0.4259 0.3853 0.3825 0.3798 0.4080 0.3916 0.4342 0.4028 0.3950 0.3875 0.4221 0.3984 0.4465 0.4071 0.3898 0.3716 0.4147 0.3814 0.4373 0.3893 copyright ? 2017-2018 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. other trademarks, product, and company names are the property of their respective owners and do not imply specifc product and/or vendor endorsement, sponsorship or association. xlamp ? xh p 70.2 led
17 cree s st an dard wh ite chro ma tic ity reg ions pl ott ed on t he ci e 1931 curve ansi cool white 5000 k 5700 k 6500 k 8000 k 0 a 0 b 0 c 0 d 0 r 0 s 0 t 0 u 1 a 1 b 1 c 1 d 2 a 2 b 2 c 2 d 1 r 1 s 1 t 1 u 2 r 2 s 2 t 2 u 0 .28 0 .29 0.30 0 .31 0.32 0 .33 0 .34 0.35 0 .36 0 .37 0.38 0 .39 0 .40 0 .28 0 .29 0 .30 0 .31 0.32 0.33 0.34 0.35 0.36 ccy ccx a nsi c78.3 7 7a copyright ? 2017-2018 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. other trademarks, product, and company names are the property of their respective owners and do not imply specifc product and/or vendor endorsement, sponsorship or association. xlamp ? xh p 70.2 led
18 cree s st an dard wh ite chro ma tic ity reg ions pl ott ed on t he ci e 1931 curve - continu ed ansi neutral white and ansi warm white 2700 k 3000 k 3500 k 4000 k 4500 k 5000 k 5700 k 3a 3b 3c 3 d 4 a 4 b 4 c 4d 5a 5 b 5c 5 d 6 a 6b 6 c 6d 7 a 7 b 7c 7 d 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0. 3 2 0. 3 3 0. 3 4 0. 3 5 0. 3 6 0. 3 7 0. 3 8 0. 3 9 0. 4 0 0. 4 1 0. 4 2 0. 4 3 0. 4 4 0.45 0. 4 6 0. 4 7 0. 4 8 ccy ccx a n si c7 8. 3 77a 0. 4 9 0. 50 copyright ? 2017-2018 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. other trademarks, product, and company names are the property of their respective owners and do not imply specifc product and/or vendor endorsement, sponsorship or association. xlamp ? xh p 70.2 led
19 cree s st an dard wh ite chro ma tic ity reg ions pl ott ed on t he ci e 1931 curve - continu ed 2700 k 3000 k 3500 k 4000 k 4500 k 5000 k 5700 k 6500 k 8000 k 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.27 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 0.49 ccy ccx ansi c78.377 quadrangle easywhite 5 - step easywhite 3 - step easywhite 2 - step copyright ? 2017-2018 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. other trademarks, product, and company names are the property of their respective owners and do not imply specifc product and/or vendor endorsement, sponsorship or association. xlamp ? xh p 70.2 led
20 cree s st an dard coo l wh ite kits p l ott ed on a nsi st an dard chro ma tic ity reg ions 5000 k 5700 k 6500 k 8000 k 0a 0b 0c 0d 0r 0s 0t 0u 1a 1b 1c 1d 2a 2b 2c 2d 1r 1s 1t 1u 2r 2s 2t 2u 0 . 2 8 0 . 2 9 0 . 3 0 0 . 3 1 0 . 3 2 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 0 . 3 7 0 . 3 8 0 . 3 9 0 . 4 0 0 . 2 8 0 . 2 9 0 . 3 0 0 . 3 1 0 . 3 2 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 c c y c c x a ns i c 7 8 . 3 7 7 a dt 5000 k 5700 k 6500 k 8000 k 0a 0b 0c 0d 0r 0s 0t 0u 1a 1b 1c 1d 2a 2b 2c 2d 1r 1s 1t 1u 2r 2s 2t 2u 0 . 2 8 0 . 2 9 0 . 3 0 0 . 3 1 0 . 3 2 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 0 . 3 7 0 . 3 8 0 . 3 9 0 . 4 0 0 . 2 8 0 . 2 9 0 . 3 0 0 . 3 1 0 . 3 2 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 c c y c c x a ns i c 7 8 . 3 7 7 a dv 5000 k 5700 k 6500 k 8000 k 0a 0b 0c 0d 0r 0s 0t 0u 1a 1b 1c 1d 2a 2b 2c 2d 3a 3b 1r 1s 1t 1u 2r 2s 2t 2u 3r 3s 0 . 2 8 0 . 2 9 0 . 3 0 0 . 3 1 0 . 3 2 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 0 . 3 7 0 . 3 8 0 . 3 9 0 . 4 0 0 . 2 8 0 . 2 9 0 . 3 0 0 . 3 1 0 . 3 2 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 c c y c c x a ns i c 7 8 . 3 7 7 a e1 5000 k 5700 k 6500 k 8000 k 0a 0b 0c 0d 0r 0s 0t 0u 1a 1b 1c 1d 2a 2b 2c 2d 3a 3b 1r 1s 1t 1u 2r 2s 2t 2u 3r 3s 0 . 2 8 0 . 2 9 0 . 3 0 0 . 3 1 0 . 3 2 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 0 . 3 7 0 . 3 8 0 . 3 9 0 . 4 0 0 . 2 8 0 . 2 9 0 . 3 0 0 . 3 1 0 . 3 2 0 . 3 3 0 . 3 4 0 . 3 5 0 . 3 6 c c y c c x a ns i c 7 8 . 3 7 7 a e2 copyright ? 2017-2018 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. other trademarks, product, and company names are the property of their respective owners and do not imply specifc product and/or vendor endorsement, sponsorship or association. xlamp ? xh p 70.2 led
21 cree s st an dard w arm and neutral wh ite kits p l ott ed on a nsi st an dard chro ma tic ity reg ions 2700 k 3000 k 3500 k 4000 k 4500 k 5000 k 3a 3b 3c 3d 4a 4b 4 c 4d 5a 5b 5 c 5d 6a 6b 6 c 6d 7a 7b 7c 7d 0.33 0. 3 4 0. 3 5 0.36 0. 3 7 0. 3 8 0.39 0. 4 0 0. 4 1 0.42 0. 4 3 0.44 0. 4 5 0. 3 2 0.33 0. 3 4 0. 3 5 0.36 0. 3 7 0. 3 8 0. 3 9 0.40 0. 4 1 0. 4 2 0.43 0. 4 4 0. 4 5 0.46 0. 4 7 0. 4 8 0. 4 9 0.50 ccy ccx e3 e4 e5 e6 e7 a ns i c 7 8 . 3 7 7 a copyright ? 2017-2018 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. other trademarks, product, and company names are the property of their respective owners and do not imply specifc product and/or vendor endorsement, sponsorship or association. xlamp ? xh p 70.2 led
22 b in and o rde r-co de for ma t bin codes and order codes for xhp70.2 leds are confgured in the following manner: o rder code bin code ssssss-bd -gggg - hjklmmnnn series xhp7 0 b = xhp7 0 . 2 internal code minimum luminous flux group chromaticity group cri specification 0 = no minimum cri b = 7 0 cri minimum h = 8 0 cri minimum u = 9 0 cri minimum vf class d = 6 -v/1 2 -v configurable configuration b = internal code d = reel size ssssss -e -nnn-mmm-jk- l -pp series xhp7 0 b = xhp7 0 . 2 chromaticity group vf class d = 6 -v/1 2 -v configurable cri specification 0 = no minimum cri b = 7 0 cri minimum h = 8 0 cri minimum u = 9 0 cri minimum internal code voltage performance group luminous flux group internal code copyright ? 2017-2018 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. other trademarks, product, and company names are the property of their respective owners and do not imply specifc product and/or vendor endorsement, sponsorship or association. xlamp ? xh p 70.2 led
23 refl o w so ldering c har ac teristics in testing, cree has found xlamp xhp70.2 leds to be compatible with jedec j -std- 020c, using the parameters listed below. as a general guideline, cree recommends that users follow the recommended soldering profle provided by the manufacturer of the solder paste used, and therefore it is the lamp or luminaire manufacturers responsibility to determine applicable soldering requirements. note that this general guideline may not apply to all pcb designs and confgurations of refow soldering equipment. profile feature lead-free solder average ramp-up rate (ts max to t p ) 1.2?c/second preheat: temperature min (ts min ) 120 c preheat: temperature max (ts max ) 170 c preheat: time (ts min to ts max ) 65-150 seconds time maintained above: temperature (t l ) 217 c time maintained above: time (t l ) 45-90 seconds peak/classifcation temperature (tp) 235 - 245 c time within 5?c of actual peak temperature (tp) 20-40 seconds ramp-down rate 1 - 6 c/second time 25?c to peak temperature 4 minutes max. note: all temperatures refer to the topside of the package, measured on the package body surface. t p t l temperature time t 25?c to peak preheat ts t s t p 25 ramp-down ramp-up critical zone t l to t p ts max ts min copyright ? 2017-2018 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. other trademarks, product, and company names are the property of their respective owners and do not imply specifc product and/or vendor endorsement, sponsorship or association. xlamp ? xh p 70.2 led
24 n otes measurements the luminous fux, radiant power, chromaticity, forward voltage and cri measurements in this document are binning specifcations only and solely represent product measurements as of the date of shipment. these measurements will change over time based on a number of factors that are not within crees control and are not intended or provided as operational specifcations for the products. calculated values are provided for informational purposes only and are not intended or provided as specifcations. pre?release qualifcation testing please read the le d reliability overview for details of the qualifcation process cree applies to ensure long-term reliability for xlamp leds and details of crees pre-release qualifcation testing for xlamp leds. cree did not perform room temperature operating life (rtol) testing on the xhp70.2 led. lumen maintenance cree now uses standardized i e s lm-80-08 and tm-21-11 methods for collecting long-term data and extrapolating le d lumen maintenance. for information on the specifc lm-80 data sets available for this led, refer to the public lm-80 results document . please read the long-term lumen maintenance application note for more details on crees lumen maintenance testing and forecasting. please read the thermal management application note for details on how thermal design, ambient temperature, and drive current affect the le d junction temperature. moisture sensitivity cree recommends keeping xlamp leds in the provided, resealable moisture-barrier packaging (mbp) until immediately prior to soldering. unopened mbps that contain xlamp le ds do not need special storage for moisture sensitivity. once the mbp is opened, xlamp xhp70.2 leds may be stored as msl 1 per jedec j-std-033, meaning they have unlimited foor life in conditions of 30 oc/85% relative humidity (rh). regardless of the storage condition, cree recommends sealing any unsoldered leds in the original mbp. rohs compliance the levels of rohs restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with eu directive 2011/65/ec (rohs2), as implemented january 2, 2013. rohs declarations for this product can be obtained from your cree representative or from the product e cology section of the cree website. r each compliance reach substances of very high concern (svhcs) information is available for this product. since the european chemical agency (echa) has published notice of their intent to frequently revise the s v hc listing for the foreseeable future, please contact a cree representative to insure you get the most up-to-date reach svhc declaration. reach banned substance information (reach article 67) is also available upon request. copyright ? 2017-2018 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. other trademarks, product, and company names are the property of their respective owners and do not imply specifc product and/or vendor endorsement, sponsorship or association. xlamp ? xh p 70.2 led
25 ul ? r ecognized component this product meets the requirements to be considered a ul recognized component with level 4 enclosure consideration. the l ed package or a portion thereof has been investigated as a fre and electrical enclosure per ansi/ul 8750. v ision advisory warning: do not look at an exposed lamp in operation. e ye injury can result. for more information about l e ds and eye safety, please refer to the led e ye safety application note . n ote s - c ontinued copyright ? 2017-2018 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. other trademarks, product, and company names are the property of their respective owners and do not imply specifc product and/or vendor endorsement, sponsorship or association. xlamp ? xh p 70.2 led
26 m echanical dimensions thermal vias, if present, are not shown on these drawings. all dimensions are .13?mm unless otherwise indicated. thermal pad is electrically isolated side view t op view size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a c d 1 2 3 4 5 6 6 5 4 3 2 1 a c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 r3.76 4.34 6.80 .70 4.00 .70 6.80 3.15 .50 7.00 7.00 .56 7.00 .90 4.20 .50 .50 4.20 7.00 .30 3.35 7.00 .50 .90 .30 3.35 .70 .70 3.15 .50 6.80 4.00 .70 6.68 .80 typ. .60 1.23 1.23 .32 typ. .60 5.84 3.04 6.70 1 / 1 12.000 b 2610-00075 xhp70b outline 11/15/16 d. cronin revisons rev description by date app'd all dimensions at .13mm unless otherwise noted recommended copper layout 6v recommended copper layout 12v recommended solder pad (solder resist pattern) recommended stencil openings optical reference optical reference size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a c d 1 2 3 4 5 6 6 5 4 3 2 1 a c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 r3.76 4.34 6.80 .70 4.00 .70 6.80 3.15 .50 7.00 7.00 .56 7.00 .90 4.20 .50 .50 4.20 7.00 .30 3.35 7.00 .50 .90 .30 3.35 .70 .70 3.15 .50 6.80 4.00 .70 6.68 .80 typ. .60 1.23 1.23 .32 typ. .60 5.84 3.04 6.70 1 / 1 12.000 b 2610-00075 xhp70b outline 11/15/16 d. cronin revisons rev description by date app'd all dimensions at .13mm unless otherwise noted recommended copper layout 6v recommended copper layout 12v recommended solder pad (solder resist pattern) recommended stencil openings optical reference optical reference anode side cathode side size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a c d 1 2 3 4 5 6 6 5 4 3 2 1 a c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 r3.76 4.34 6.80 .70 4.00 .70 6.80 3.15 .50 7.00 7.00 .56 7.00 .90 4.20 .50 .50 4.20 7.00 .30 3.35 7.00 .50 .90 .30 3.35 .70 .70 3.15 .50 6.80 4.00 .70 6.68 .80 typ. .60 1.23 1.23 .32 typ. .60 5.84 3.04 6.70 1 / 1 12.000 b 2610-00075 xhp70b outline 11/15/16 d. cronin revisons rev description by date app'd all dimensions at .13mm unless otherwise noted recommended copper layout 6v recommended copper layout 12v recommended solder pad (solder resist pattern) recommended stencil openings optical reference optical reference b ottom view recommended pcb solder pad 12?v confguration (thermal pad is connected to anode and cathode and is not electrically isolated) recommended pcb solder pad 6?v confguration (thermal pad is electrically isolated) size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a c d 1 2 3 4 5 6 6 5 4 3 2 1 a c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 r3.76 4.34 6.80 .70 4.00 .70 6.80 3.15 .50 7.00 7.00 .56 7.00 .90 4.20 .50 .50 4.20 7.00 .30 3.35 7.00 .50 .90 .30 3.35 .70 .70 3.15 .50 6.80 4.00 .70 6.68 .80 typ. .60 1.23 1.23 .32 typ. .60 5.84 3.04 6.70 1 / 1 12.000 b 2610-00075 xhp70b outline 11/15/16 d. cronin revisons rev description by date app'd all dimensions at .13mm unless otherwise noted recommended copper layout 6v recommended copper layout 12v recommended solder pad (solder resist pattern) recommended stencil openings optical reference optical reference size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a c d 1 2 3 4 5 6 6 5 4 3 2 1 a c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 r3.76 4.34 6.80 .70 4.00 .70 6.80 3.15 .50 7.00 7.00 .56 7.00 .90 4.20 .50 .50 4.20 7.00 .30 3.35 7.00 .50 .90 .30 3.35 .70 .70 3.15 .50 6.80 4.00 .70 6.68 .80 typ. .60 1.23 1.23 .32 typ. .60 5.84 3.04 6.70 1 / 1 12.000 b 2610-00075 xhp70b outline 11/15/16 d. cronin revisons rev description by date app'd all dimensions at .13mm unless otherwise noted recommended copper layout 6v recommended copper layout 12v recommended solder pad (solder resist pattern) recommended stencil openings optical reference optical reference copyright ? 2017-2018 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. other trademarks, product, and company names are the property of their respective owners and do not imply specifc product and/or vendor endorsement, sponsorship or association. xlamp ? xh p 70.2 led
27 m echanical dime nsions - continued notes: ? cree recommends using thermal pad kickouts to maximize component thermal performance. ? cree recommends using white solder mask material to minimize system optical loss. * this stencil has been tested and optimized for the avoidance of voiding when using alpha ? lum e t ? p30 maxrel solder paste. for other solder pastes, a window pane design for the thermal pad stencil may result in a lower voiding percentage. contact your local cree field applications engineer for consultation regarding your specifc application. elec trical con figura tion negative a negative b positive a positive a 12 v 6 v negative b positive b solder pad link negative a negative b positive a positive a 12 v 6 v negative b positive b solder pad link 6-v confguration 12-v confguration recommended stencil openings* 6?v & 12?v confgurations recommended s older pad (s older mask pattern) size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a c d 1 2 3 4 5 6 6 5 4 3 2 1 a c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 r3.76 4.34 6.80 .70 4.00 .70 6.80 3.15 .50 7.00 7.00 .56 7.00 .90 4.20 .50 .50 4.20 7.00 .30 3.35 7.00 .50 .90 .30 3.35 .70 .70 3.15 .50 6.80 4.00 .70 6.68 .80 typ. .60 1.23 1.23 .32 typ. .60 5.84 3.04 6.70 1 / 1 12.000 b 2610-00075 xhp70b outline 11/15/16 d. cronin revisons rev description by date app'd all dimensions at .13mm unless otherwise noted recommended copper layout 6v recommended copper layout 12v recommended solder pad (solder resist pattern) recommended stencil openings optical reference optical reference size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a c d 1 2 3 4 5 6 6 5 4 3 2 1 a c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 r3.76 4.34 6.80 .70 4.00 .70 6.80 3.15 .50 7.00 7.00 .56 7.00 .90 4.20 .50 .50 4.20 7.00 .30 3.35 7.00 .50 .90 .30 3.35 .70 .70 3.15 .50 6.80 4.00 .70 6.68 .80 typ. .60 1.23 1.23 .32 typ. .60 5.84 3.04 6.70 1 / 1 12.000 b 2610-00075 xhp70b outline 11/15/16 d. cronin revisons rev description by date app'd all dimensions at .13mm unless otherwise noted recommended copper layout 6v recommended copper layout 12v recommended solder pad (solder resist pattern) recommended stencil openings optical reference optical reference copyright ? 2017-2018 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. other trademarks, product, and company names are the property of their respective owners and do not imply specifc product and/or vendor endorsement, sponsorship or association. xlamp ? xh p 70.2 led
28 tape and reel all cree carrier tapes conform to e ia-481d, automated component handling systems standard. all dimensions are .13?mm unless otherwise indicated. size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 trailer 180mm (min) of empty pockets sealed with tape (100 pockets min.) loaded pockets (1000lamps) 12.1 4.6 16 +.3 -.0 1.75 .10 4.10 leader 420mm (min) of empty pockets sealed with tape (40 pockets min.) 7.4 0.36 " 13 13mm 1 / 1 3.000 b 2402-00056 xhp70 loading spec -- -- -- -- -- -- 12/9/14 d. cronin revisons rev description by date app'd b reversed polarity in view dc 1/6/15 end start user feed direction cathode side anode side user feed direction 1.5 .1 size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 trailer 180mm (min) of empty pockets sealed with tape (100 pockets min.) loaded pockets (1000lamps) 12.1 4.6 16 +.3 -.0 1.75 .10 4.10 leader 420mm (min) of empty pockets sealed with tape (40 pockets min.) 7.4 0.36 " 13 13mm 1 / 1 3.000 b 2402-00056 xhp70 loading spec -- -- -- -- -- -- 12/9/14 d. cronin revisons rev description by date app'd b reversed polarity in view dc 1/6/15 end start user feed direction cathode side anode side user feed direction 1.5 .1 copyright ? 2017-2018 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. other trademarks, product, and company names are the property of their respective owners and do not imply specifc product and/or vendor endorsement, sponsorship or association. xlamp ? xh p 70.2 led
29 p ackag ing label with cree bin code, qty, lot # label with cree bin code, qty, lot # vacuum-sealed moisture barrier bag dessicant (inside bag) humidity indicator card (inside bag) patent label label with customer order code, qty, reel id, po # patent label label with cree bin code, quantity, reel id label with cree bin code, quantity, reel id label with cree order code, quantity, reel id, po # label with cree order code, quantity, reel id, po # label with cree bin code, quantity, reel id unpackaged reel packaged reel boxed reel copyright ? 2017-2018 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. other trademarks, product, and company names are the property of their respective owners and do not imply specifc product and/or vendor endorsement, sponsorship or association. xlamp ? xh p 70.2 led

▲Up To Search▲

Price & Availability of XHP70B-00-0000-0D0HN20E3

	To Download XHP70B-00-0000-0D0HN20E3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .