vectron interna onal ? 267 lowell road, hudson, nh 03051 ? tel: 1-88-vectron-1 ? h p://www.vectron.com page 1 of 5 MV-9350A 80-220 mhz high performance vcxo parameter and condi ons symbol min. typ. max. unit condi on output frequency range f 80 ? 220 mhz frequency stability f_stab -20 ? +20 ppm inclusive of ini al tolerance at 25 c, and varia ons over opera ng temperature, aging, supply voltage and load -50 ? +50 ppm aging f_aging ? ? 5 ppm 10 years opera ng temperature range t_use -20 ? +70 c extended commercial -40 ? +85 c industrial supply voltage vdd 2.97 3.3 3.63 v contact vectron for any other voltage support between 2.5v and 3.3v 2.52 2.8 3.08 v 2.25 2.5 2.75 v 1.71 1.8 1.89 v pull range pr 50, 80, 100 ppm upper control voltage vc_u 1.7 ? ? v vdd = 1.8 v, voltage at which maximum devia on is guaranteed. 2.4 ? ? v vdd = 2.5 v, voltage at which maximum devia on is guaranteed. 2.7 ? ? v vdd = 2.8 v, voltage at which maximum devia on is guaranteed. 3.2 ? ? v vdd = 3.3 v, voltage at which maximum devia on is guaranteed. lower control voltage vc_l ? ? 0.1 v voltage at which miminum devia on is guaranteed. control voltage input impedence z_vin 100 ? ? k for the voltage control pin linearity lin ? 0.1 1 % frequency change polarity posi ve slope control voltage bandwidth (-3db) v_bw ? 8 ? khz contact vectron for 16 khz and other high bandwidth op ons current consump on idd ? 34 36 ma no load condi on, f = 100 mhz, vdd = 2.5 v, 2.8 v or 3.3 v ? 30 33 ma no load condi on, f = 100 mhz, vdd = 1.8 v standby current i_std ? ? 70 a all vdds, st = gnd, output is weakly pulled down duty cycle dc 45 ? 55 % f <= 165 mhz, all vdds. 40 ? 60 % f > 165 mhz, all vdds. rise/fall time tr, tf ? 1.5 2 ns vdd = 1.8, 2.5, 2.8 or 3.3 v, 10% - 90% vdd level output voltage high voh 90% ? ? vdd oh = -7 ma, iol = 7 ma, (vdd = 3.3 v) ioh = -4 ma, iol = 4 ma, (vdd = 2.8 v and vdd = 2.5 v) ioh = -2 ma, iol = 2 ma, (vdd = 1.8 v) output voltage low vol ? ? 10% vdd input pull-up impedance z_in ? 100 250 k for the oe/st pin if available start-up time t_start ? 6 10 ms oe enable/disable time t_oe ? ? 150 ns f=100 mhz, all vdds. for other freq, t_oe = 100 ns + 3 cycles resume time t_resume ? ? 10 ms measured from the me st pin crosses 50% threshold rms period ji er t_ji ? 1.5 2 ps f = 156.25 mhz, vdd = 2.5 v, 2.8 v or 3.3 v ? 2 3 ps f = 156.25 mhz, vdd = 1.8 v rms phase ji er (random) t_phj ? 0.6 1 ps f = 156.25 mhz, integra on bandwidth=12khz to 20mhz, all vdds performance speci ca ? ons ? any frequency between 80 mhz and 220 mhz with 6 decimal places of accuracy ? cmos compa ble output ? industrial and extended commercial temperature ranges ? industry-standard packages: 3.2 mm x2.5 mm (4-pin), 5.0 mm x 3.2 mm (6-pin), 7.0 mm x 5.0 mm (6-pin) ? ideal for telecom clock synchroniza on, low bandwidth analog pll, ji er cleaning, clock recovery, audio, video, fpga, broadband and networking features applications rev 1.2 aug 2014
vectron interna onal ? 267 lowell road, hudson, nh 03051 ? tel: 1-88-vectron-1 ? h p://www.vectron.com page 2 of 5 typical phase noise rev 1.2 aug 2014
vectron interna onal ? 267 lowell road, hudson, nh 03051 ? tel: 1-88-vectron-1 ? h p://www.vectron.com page 3 of 5 package outline & dimensions (unit: mm) recommended land pa ? ern (unit: mm) 3.2 x 2.5 x 0.75 mm 3.2 0.15 2.5 0.15 2.1 0.9 0.7 0.9 0.75 0.05 #1 #2 #4 #3 #2 #1 #3 #4 yxxxx 5.0 3.2 0.75 0.750.05 yxxxx 1.20 #2 #5 #2 #5 #1 #3 #4 #6 #1 #3 #4 #6 7.0 x 5.0 x 0.90 mm 5.00.10 1.40 1.10 5.08 7.00.10 2.60 ; ; ; ; 0.85 0.15 2.2 1.9 1.4 1.2 5.08 1.60 3.80 4 pin package: pin connec ? ons pin symbol func onality 1 vin 0-vdd: produces voltage dependent frequency change 2 gnd vdd power supply ground 3 clk oscillator output 4 vdd power supply voltage 6 pin package: pin connec ? ons pin symbol func onality 1 vin 0-vdd: produces voltage dependent frequency change 2 (op ons) nc h or l or open: no e ? ect on output frequency or other device func ons oe h or open: speci ed frequency output, l: output is high impedance st h or open: speci ed frequency output, l: output is low level (weak pull down). oscilla on stops 3 gnd vdd power supply ground 4 clk oscillator output 5 nc do not connect; leave it oa ng 6 vdd power supply voltage packaging and pinout rev 1.2 aug 2014
vectron interna onal ? 267 lowell road, hudson, nh 03051 ? tel: 1-88-vectron-1 ? h p://www.vectron.com page 4 of 5 absolute maximum ra ? ngs and test compliance maximum ra ? ngs parameter min. max. unit storage temperature -65 150 c vdd -0.5 4 v electrosta c discharge ? 6000 v soldering temperature (follow standard pb free soldering guidelines) ? 260 c program reten on over -40 to 125c, process, vdd (0 to 3.65 v) 1,000+ - years environmental compliance parameter condi on/test method mechanical shock mil-std-883f, method 2002 mechanical vibra on mil-std-883f, method 2007 temperature cycle jesd22, method a104 solderability mil-std-883f, method 2003 moisture sensi vity level msl1 @ 260c rev 1.2 aug 2014 family 9350a: vcxo, 80-220mhz ordering informa ? on mv - 9350a e - 1 f - e e k 156m250000 product mv: mems vcxo supply voltage e: +3.3 vdc g: +2.8 vdc h: +2.5 vdc j: +1.8 vdc frequency temp range j: -20/70c e: -40/85c notes: 1. contact factory for improved stabili es or addi onal product op ons. not all op ons and codes are available at all frequencies. 2. unless otherwise stated all values are valid a er warm-up me and refer to typical condi ons for supply voltage, frequency control voltage, load, temperature (25c). 3. subject to technical modi ca on. 4. contact factory for availability. feature pin n: no connect (6 pin op on, default for 4 pin) e: ouput enable s: standby stability e: 20ppm f: 25ppm k: 50ppm pull range (apr) k: 50ppm p: 80ppm s: 100ppm package 1: 6 pin 7.0mm x 5.0mm 3: 6 pin 5.0mm x 3.2mm 6: 4 pin 3.2mm x 2.5mm
vectron interna onal ? 267 lowell road, hudson, nh 03051 ? tel: 1-88-vectron-1 ? h p://www.vectron.com page 5 of 5 rev 1.2 aug 2014 revision history disclaimer vectron interna onal reserves the right to make changes to the product(s) and or informa on contained herein without no ce. no liability is assumed as a result of their use or applica- on. no rights under any patent accompany the sale of any such product(s) or informa on. for additional information, please contact usa: vectron interna onal 267 lowell road, suite 102 hudson, nh 03051 tel: 1.888.328.7661 fax: 1.888.329.8328 europe: vectron interna onal landstrasse, d-74924 neckarbischofsheim, germany tel: +49 (0) 7268.801.100 fax: +49 (0) 7268.801.282 asia: 68 yin cheng road(c), 22nd floor one lu jia zui pudong, shanghai 200120, china tel: +86 21 6194 6886 fax: +86 21 6194 6699 revision change summary date 1.0 product release june 2013 1.1 knowles logo and address change feb 2014 1.2 add 20ppm temperature stability aug 2014
|
