View WB10ZG-1250-U2-A-BAB1_8882088.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

wb10zg bab1 db-wb10zg-e-2013-11 1/16 ? asm gmbh www.asm-sensor.com order example: wb10zg - 1250 - u2 - a - l10 - m12a5 - bab1 order code connector cable see page 12 positape ? wb10zg analog output specifcations outputs u2 u8 i1 voltage 0.5 ... 10 v voltage 0.5 ... 4.5 v current 4 ... 20 ma, 3 wire resolution <0,05 mm linearity 0.10 % f. s. (standard); optional 0.05 % sensing device magnetic absolute encoder material zinc diecast, aluminium, plastic and stainless steel; tape: stainless steel, 10 mm wide, 0.08 mm thick protection class ip65 (with mating connector) connection connector m12, 5 pin shock en 60068-2-27:2010, 100 g/11 ms, 100 shocks vibration en 60068-2-6:2008, 20 g 10 hz-2 khz, 10 cycles temperature range -20 ... +85 c position sensor with measuring tape ? measurement range up to 2000 mm ? protection class ip65 ? stainless steel measuring tape ? analog output order code wb10zg model name measurement range (in mm) 250 / 375 / 500 / 750 / 1000 / 1250 / 1500 / 2000 output u2 = 0.5 ... 10 v signal conditioner u8 = 0.5 ... 4.5 v signal conditioner i1 = 4 ... 20 ma signal conditioner signal characteristics a = increasing (eg. 4 ... 20 ma) d = decreasing (eg. 20 ... 4 ma) linearity l10 = 0.10 % (standard) l05 = 0.05 % (optional, only for measurement ranges 1000 mm) connection m12a5 = connector m12, 5 pin dust wiper bab1
wb10zg bab1 db-wb10zg-e-2013-11 2/16 ? asm gmbh www.asm-sensor.com order example: wb10zg - 2000 - u2/pmu - a - l10 - m12a5 - bab1 order code connector cable see page 13 positape ? wb10zg analog output, programmable specifcations output u2/pmu u8/pmu i1/pmu voltage 0.5 ... 10 v, programmable voltage 0.5 ... 4.5 v, programmable current 4 ... 20 ma, 3 wire, programmable resolution <0,05 mm linearity 0.10 % f. s. (standard); optional 0.05 % sensing device magnetic absolute encoder material zinc diecast, aluminium, plastic and stainless steel; tape: stainless steel, 10 mm wide, 0.08 mm thick protection class ip65 (with mating connector only) connection connector m12, 5 pin shock en 60068-2-27:2010, 100 g/11 ms, 100 shocks vibration en 60068-2-6:2008, 20 g 10 hz-2 khz, 10 cycles temperature range -20 ... +85 c position sensor with measuring tape ? measurement range up to 2000 mm ? protection class ip65 ? stainless steel measuring tape ? analog output, programmable order code wb10zg model name measurement range (in mm) 250 / 375 / 500 / 750 / 1000 / 1250 / 1500 / 2000 output u2/pmu = 0.5 ... 10 v signal conditioner , programmable u8/pmu = 0.5 ... 4.5 v signal conditioner , programmable i1/pmu = 4 ... 20 ma signal conditioner , programmable signal characteristics a = increasing (eg. 4 ... 20 ma) d = decreasing (eg. 20 ... 4 ma) linearity l10 = 0.10 % (standard) l05 = 0.05 % (optional, only for measurement ranges 1000 mm) connection m12a5 = connector m12, 5 pin dust wiper bab1
wb10zg bab1 db-wb10zg-e-2013-11 3/16 ? asm gmbh www.asm-sensor.com positape ? wb10zg digital output ssi specifcations outputs synchronous serial interface (ssi) resolution up to 10 m linearity 0.10 % f. s. (standard); optional 0.05 % sensing device magnetic absolute encoder material zinc diecast, aluminium and plastic tape: stainless steel, 10 mm wide, 0.08 mm thick protection class ip65 (with mating connector only) connection connector m12, 8 pin shock en 60068-2-27:2010, 100 g/11 ms, 100 shocks vibration en 60068-2-6:2008, 20 g 10 hz-2 khz, 10 cycles temperature range -20 ... +85 c order example: wb10zg - 2000 - 100 - mssi - l10 - m12a8 - bab1 order code connector cable see page 14 order code wb10zg model name measurement range (in mm) 1000 / 2000 resolution (in m) 10 / 50 / 100 outputs mssi = ssi synchronous serial interface linearity l10 = 0.10% (standard) l05 = 0.05% (optional) connection m12a8 = connector m12, 8 pin dust wiper bab1 position sensor with measuring tape ? measurement range up to 2000 mm ? protection class ip65 ? stainless steel measuring tape ? digital output ssi
wb10zg bab1 db-wb10zg-e-2013-11 4/16 ? asm gmbh www.asm-sensor.com positape ? wb10zg digital output canopen order example: wb10zg - 2000 - mcanop - l10 - m12/can - bab1 order code connector cable see page 15 specifcations outputs canopen or can sae j1939 resolution setting via can bus linearity 0.10 % f. s. (standard); optional 0.05 % sensing device magnetic absolute encoder material zinc diecast, aluminium, plastic and stainless steel; tape: stainless steel, 10 mm wide, 0.08 mm thick protection class ip65 (with mating connector only) connection connector m12, 5 pin shock en 60068-2-27:2010, 100 g/11 ms, 100 shocks vibration en 60068-2-6:2008, 20 g 10 hz-2 khz, 10 cycles temperature range -20 ... +85 c position sensor with measuring tape ? measurement range up to 2000 mm ? protection class ip65 ? stainless steel measuring tape ? digital output canopen or can sae j1939 order code wb10zg model name measurement range (in mm) 1000 / 2000 output mcanop = canopen mcanj1939 = can sae j1939 linearity l10 = 0.10% (standard) l05 = 0.05% (optional) connection m12/can = connector m12, 5 pin dust wiper bab1
j ( 1,5 : 1 ) j 1 5 , 2 [ 0 . 5 9 8 ] 2 0 [ 0 . 7 8 7 ] 3 8 , 5 [ 1 . 516 ] 1 2 1 ? 1 4 . 7 6 4 ? 0 . 0 3 9 [ ] 2 5 , 2 [ 0 . 9 9 2 ] 5 0 , 4 [ 1 . 9 8 4 ] 6 8 , 7 [ 2 . 7 0 5 ] 1 1 7 ? 1 4 . 6 0 6 ? 0 [ ] 1 5 , 2 [ 0 . 5 9 8 ] 2 0 [ 0 . 7 8 7 ] 2 8 ,5 [ 1 .1 22] 3 8 , 5 [ 1 . 516 ] 9 4 ,5 [3 .7 20 ] 1 5 [ 0 . 5 9 1 ] 4 x m 5 -8 [ . 315 ] t i e f / d e e p ? 5 [ 0 . 1 9 7 ] 1 0 [ 0 . 3 94] 2 ,1 [ 0 .083 ] 10 [0 .394] 13 [0.5 1 2 ] m 12- s tecker / m 12- connec t or db-wb10zg-e-2013-11 5/16 asm gmbh www.asm-sensor.com positape wb10zg dimensions outline drawing wb10zg up to 1000 mm dimensions in mm [inch] dimensions informative only. for guaranteed dimensions consult factory.
j ( 1,5 : 1 ) j 1 5 , 2 [ 0 . 5 9 8 ] 2 0 [ 0 . 7 8 7 ] 3 8 , 5 [ 1 . 516] 1 2 1 ? 1 4 . 7 6 4 ? 0 . 0 3 9 [ ] 2 5 , 2 [ 0 . 9 9 2 ] 5 0 , 4 [ 1 . 9 8 4 ] 6 8 , 7 [ 2 . 7 0 5 ] 1 1 7 ? 1 4 . 6 0 6 ? 0 [ ] 1 5 , 2 [ 0 . 5 9 8 ] 2 0 [ 0 . 7 8 7 ] 2 8 ,5 [ 1 .1 22] 3 8 , 5 [ 1 . 516 ] 9 4 ,5 [3 .7 20 ] 4 , 5 [ 0 . 1 7 7 ] 4 x m 5 - 8 [ . 3 15] tie f / d e e p ? 5 [ 0 . 1 9 7 ] 1 0 [ 0 . 3 94] 2 ,1 [ 0 .083 ] 10 [0 .394] 13 [0.5 1 2 ] m 12- s tecker / m 12- connec t or 9 , 9 [ 0 . 3 9 0 ] db-wb10zg-e-2013-11 6/16 asm gmbh www.asm-sensor.com positape wb10zg dimensions outline drawing wb10zg 1250 / 1500 / 2000 mm dimensions in mm [inch] dimensions informative only. for guaranteed dimensions consult factory.
u2 u8 i1 db-wb10zg-e-2013-11 7/16 ? asm gmbh www.asm-sensor.com u2 voltage output 0.5 ... 10 v excitation voltage 10 ... 36 v dc excitation current typ. 20 ma at 24 v dc typ. 20 ma at 24 v dc max. 60 ma output voltage 0,5 ... 10 v dc output current 2 ma max. measuring rate 1 khz standard stability (temperature) 50 x 10 -6 /c f.s. (typical) protection reverse polarity, short circuit operating temperature see specifcation of the respective sensor emc en 61326-1:2013 i1 current output 4 ... 20 ma, 3 wire excitation voltage 10 ... 36 v dc excitation current typ. 36 ma at 24 v dc typ. 70 ma at 12 v dc max. 100 ma load r l 500 ? max. output current 4 ... 20 ma measuring rate 1 khz standard stability (temperature) 50 x 10 -6 /c f.s. (typical) protection reverse polarity, short circuit operating temperature see specifcation of the respective sensor emc en 61326-1:2013 u8 voltage output 0.5 ... 4.5 v excitation voltage 10 ... 36 v dc excitation current typ. 17 ma at 24 v dc typ. 32ma at 12 v dc max. 60 ma output voltage 0,5 ... 4,5 v dc output current 2 ma max. measuring rate 1 khz standard stability (temperature) 50 x 10 -6 /c f.s. (typical) protection reverse polarity, short circuit operating temperature see specifcation of the respective sensor emc en 61326-1:2013 positape ? u2, u8 and i1 analog outputs output signals excitation + gnd signal + signal wiring/ connection output signal connector pin cable wire color excitation + 1 brown signal 2 white gnd 3 blue do not connect! 4 black do not connect! 5 (grey) view to sensor connector
u2/pmu u8/pmu i1/pmu db-wb10zg-e-2013-11 8/16 ? asm gmbh www.asm-sensor.com u2/pmu voltage output 0.5 ... 10 v excitation voltage 10 ... 36 v dc excitation current typ. 20 ma at 24 v dc, typ. 38 ma at 12 v dc, max. 60 ma output voltage 0,5 ... 10 v dc output current 2 ma max. measuring rate 1 khz standard stability (temperature) 50 x 10 -6 /c f.s. (typical) protection reverse polarity, short circuit operating temperature see specifcation of the respective sensor emc en 61326-1:2013 i1/pmu current output 4 ... 20 ma, 3 wire excitation voltage 10 ... 36 v dc excitation current typ. 36 ma at 24 v dc, typ. 70 ma at 12 v dc, max. 100 ma load r l 500 ? max. output current 4 ... 20 ma measuring rate 1 khz standard stability (temperature) 50 x 10 -6 /c f.s. (typical) protection reverse polarity, short circuit operating temperature see specifcation of the respective sensor emc en 61326-1:2013 u8/pmu voltage output 0.5 ... 4,5 v excitation voltage 10 ... 36 v dc excitation current typ. 17 ma at 24 v dc, typ. 32 ma at 12 v dc, max. 60 ma output voltage 0,5 ... 4,5 v dc output current 2 ma max. measuring rate 1 khz standard stability (temperature) 50 x 10 -6 /c f.s. (typical) protection reverse polarity, short circuit operating temperature see specifcation of the respective sensor emc en 61326-1:2013 positape ? u2/pmu, u8/pmu and i1/pmu analog output, programmable output signals ) signal wiring/ connection signal connector pin cable wire color excitation + 1 brown signal 2 white gnd 3 blue do not connect! 4 black span/zero 5 grey excitation + gnd signal + span/zero view to sensor connector option -pmu programming of the start and end value by the customer teach-in of start and end value for the options u2/pmu, i1/pmu, u8/pmu is provided by a binary signal span/zero. at the start position connect signal span/zero for a period of 2 3 seconds to gnd via push button. at the end position connect signal span/zero for a period of 5 6 seconds to gnd via a push button. the teached positions will be stored non-volatile. to reset the sensor to factory default signal zero/end must be connected to ground while powering up the sensor for 2 3 seconds.
db-wb10zg-e-2013-11 9/16 ? asm gmbh www.asm-sensor.com positape ? mssi ssi output mssi synchronous serial ssi interface eia rs-422 excitation voltage 8 ... 36 v dc excitation current typ. 19 ma at 24 v dc, typ. 35 ma at 12 v dc, 80 ma max. clock frequency 100 khz ... 500 khz code gray-code, continuous progression, 24 bit delay between pulse trains 20 s min. stability (temperature) 50 x 10 -6 / c f.s. (typical) operating temperature see specifcation of the respective sensor protection short circuit emc en 61326-1:2013 data data clock clock recommended processing circuit note: extension of the cable length will reduce the maximum transmission rate. signal wiring/ connection signal name connector pin excitation + 1 excitation gnd 2 clock 3 clock 4 data 5 data 6 - 7 - 8 view to sensor connector transmission rate cable length baud rate 50 m 100-400 khz 100 m 100-300 khz data format (train of 26 pulses)
db-wb10zg-e-2013-11 10/16 ? asm gmbh www.asm-sensor.com mcanop canopen communication profle canopen cia 301 v 4.02, slave encoder profle encoder cia 406 v 3.2 error control node guarding, heartbeat, emergency message node id adjustable via lss; default: 127 pdo 3 txpdo, 0 rxpdo, no linking, static mapping pdo modes event-/time triggered, remote-request, sync cyclic/acyclic sdo 1 server, 0 client cam 2 cams certifed yes transmission rates 50 kbit to 1 mbit, adjustable via lss; default: 125 kbit bus connection m12 connector, 5 pins integrated bus terminating resistor 120? adjustable by the customer bus, galvanic isolated no specifcations excitation voltage 8 ... 36 v dc excitation current typ. 20 ma at 24 v typ. 40 ma at 12 v max. 80 ma measuring rate 1 khz (asynchronous) stability (temperature) 50 x 10 -6 / c f.s. repeatability 1 lsb operating temperature see specifcation of the respective sensor protection reverse polarity, short circuit dielectric strength 1 kv (v ac, 50 hz, 1 min.) emc en 61326-1:2013 positape ? mcanop output canopen signal wiring/ connection signal name connector pin no. shield 1 excitation + 2 gnd 3 can-h 4 can-l 5 view to sensor connector
db-wb10zg-e-2013-11 11/16 ? asm gmbh www.asm-sensor.com mcanj1939 can sae j1939 can specifcation iso 11898, basic and full can 2.0 b transceiver 24v-compliant, not isolated communication profle sae j1939 baud rate 250 kbit/s internal temination resistor 120 ? adjustable by the customer address default 247d, confgurable specifcations excitation voltage 8 ... 36 v dc excitation current typ. 20 ma at 24 v typ. 40 ma at 12 v max. 80 ma measuring rate 1 khz (asynchronous) stability (temperature) 50 x 10 -6 / c f.s. repeatability 1 lsb operating temperature see specifcation of the respective sensor protection reverse polarity, short circuit dielectric strength 1 kv (v ac, 50 hz, 1 min.) emc en 61326-1:2013 positape ? mmcanj1939 output can sae j1939 view to sensor connector signal wiring / connection signal name connector pin no. shield 1 excitation + 2 gnd 3 can-h 4 can-l 5 name fields arbitrary address capable 1 yes industry group 0 global vehicle system 7fh (127d) non specifc vehicle system instance 0 function ffh (255d) non specifc function instance 0 ecu instance 0 manufacturer 145h (325d) manufacturer id identity number 0nnn serial number 21 bit parameter group numbers (pgn) confguration data pgn ef00h proprietary-a (pdu1 peer-to-peer) process data pgn ffnnh proprietary-b (pdu2 broadcast); nn group extension (ps) confgurable
kab - xm - m12/4f/w/69k - litze kab - xm - m12/4f/g/69k - litze kab - xm - m12/4f/w - litze ip69k: kab - xm - m12/4f/g - litze ip69k: db-wb10zg-e-2013-11 12/16 ? asm gmbh www.asm-sensor.com positape ? accessories connectors connector cable m12, 4 pin suitable for 5-pin sensor connectors the 4-lead shielded cable is supplied with a mating 4-pin 90 m12 connector at one end and 4 wires at the other end. available lengths are 2 m, 5 m and 10 m. wire: cross sectional area 0.34 mm 2 . order code: length in m connector cable m12, 4 pin suitable for 5-pin sensor connectors the 4-lead shielded cable is supplied with a mating 4-pin m12 connector at one end and 4 wires at the other end. available lengths are 2 m, 5 m and 10 m. wire: cross sectional area 0.34 mm 2 . order code: length in m signal wiring m12, 4 pin connector pin / cable color 1 2 3 4 brown white blue black
kab - xm - m12/5f/w/69k - litze kab - xm - m12/5f/g/69k - litze kab - xm - m12/5f/w - litze ip69k: kab - xm - m12/5f/g - litze ip69k: db-wb10zg-e-2013-11 13/16 ? asm gmbh www.asm-sensor.com connector cable m12, 5 pin the 5-lead shielded cable is supplied with a mating 5-pin 90 m12 connector at one end and 5 wires at the other end. available lengths are 2 m, 5 m and 10 m. wire: cross sectional area 0.34 mm 2 . order code: length in m connector cable m12, 5 pin the 5-lead shielded cable is supplied with a mating 5-pin m12 connector at one end and 5 wires at the other end. available lengths are 2 m, 5 m and 10 m. wire: cross sectional area 0.34 mm 2 . order code: length in m signal wiring m12, 5 pin connector pin / cable color 1 2 3 4 5 brown white blue black grey positape ? accessories connectors
kab - xm - m12/8f/w - litze kab - xm - m12/8f/g - litze kab - xm - m12/8f/w/69k - litze kab - xm - m12/8f/g/69k - litze ip69k: ip69k: db-wb10zg-e-2013-11 14/16 ? asm gmbh www.asm-sensor.com connector cable m12, 8 pin the 8-lead shielded cable is supplied with a mating 8-pin 90 m12 connector at one end and 8 wires at the other end. available lengths are 2 m, 5 m and 10 m. wire: cross sectional area 0.25 mm2. order code: length in m signal wiring m12, 8 pin connector pin / cable color 1 2 3 4 5 6 7 8 white brown green yellow grey pink blue red connector cable m12, 8 pin the 8-lead shielded cable is supplied with a mating 8-pin m12 connector at one end and 8 wires at the other end. available lengths are 2 m, 5 m and 10 m. wire: cross sectional area 0.25 mm2. order code: length in m positape ? accessories connectors
kab - xm - m12/5f/g - m12/5m/g - can kab - xm - m12/5f/g/69k - m12/5m/g/69k - can kab - tconn - m12/5m - 2m12/5f - can kab - rterm - m12/5m/g - can ip69k: db-wb10zg-e-2013-11 15/16 ? asm gmbh www.asm-sensor.com connector/bus cable m12, 5 pin can bus the 5-lead shielded cable is supplied with a female 5-pin m12 connector at one end and a male 5-pin m12 connector at the other end. available lengths are 0.3, 2, 5 and 10 m. order code: length in m terminating resistance 5 pin m12 can bus t-piece for bus cable m12, 5 pin can bus order code: order code: positape ? accessories connectors
3 5 [ 1 . 3 7 8 ] 2 0 [ 0 . 7 9 5 ] 45 [1.772] 7 , 5 [ 0. 2 9 5] 7, 5 [0.295] 2 8 [1.102] 2x ? 5,5 5 [ 0 . 1 9 7 ] 40,4 [1 .591] 5 5 [ 2 . 1 6 5 ] 60 [2.362] 40 [1.575 ] wbr1 db-wb10zg-e-2013-11 16/16 ? asm gmb www.asm-sensor.com dimensions in mm inch dimensions informative only. for guaranteed dimensions consult factory. tape pulley wbr1 order code: positape ? accessories tape pulley

▲Up To Search▲

Price & Availability of WB10ZG-1250-U2-A-BAB1

	To Download WB10ZG-1250-U2-A-BAB1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .