tsus5200, tsus5201, TSUS5202 www.vishay.com vishay semiconductors rev. 2.3, 24-aug-11 1 document number: 81055 for technical questions, contact: emittertechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 infrared emitting diode, 950 nm, gaas description tsus5200 is an infrared, 950 nm emitting diode in gaas technology molded in a blue-gray tinted plastic package. features ? package type: leaded ? package form: t-1? ? dimensions (in mm): ? 5 ? leads with stand-off ? peak wavelength: p = 950 nm ? high reliability ? angle of half intensity: ? = 15 ? low forward voltage ? suitable for high pulse current operation ? good spectral matching with si photodetectors ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec note ** please see document vishay material category policy: www.vishay.com/doc?99902 applications ? infrared remote control and free air transmission systems with low forward voltage an d small package requirements ? emitter in transmissive sensors ? emitter in reflective sensors note ? test conditions see table basic characteristics note ? moq: minimum order quantity 94 8390 product summary component i e (mw/sr) ? (deg) p (nm) t r (ns) tsus5200 20 15 950 800 tsus5201 25 15 950 800 TSUS5202 30 15 950 800 ordering information ordering code packaging remarks package form tsus5200 bulk moq: 4000 pcs, 4000 pcs/bulk t-1? tsus5201 bulk moq: 4000 pcs, 4000 pcs/bulk t-1? TSUS5202 bulk moq: 4000 pcs, 4000 pcs/bulk t-1? absolute maximum ratings (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit reverse voltage v r 5v forward current i f 150 ma peak forward current t p /t = 0.5, t p = 100 s i fm 300 ma surge forward current t p = 100 s i fsm 2.5 a power dissipation p v 170 mw junction temperature t j 100 c operating temperature range t amb - 40 to + 85 c storage temperature range t stg - 40 to + 100 c soldering temperature t 5 s, 2 mm from case t sd 260 c thermal resistance j unction/ambient j-std-051, lead s 7 mm, soldered on pcb r thja 230 k/w
tsus5200, tsus5201, TSUS5202 www.vishay.com vishay semiconductors rev. 2.3, 24-aug-11 2 document number: 81055 for technical questions, contact: emittertechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 1 - power dissipation limit vs. ambient temperature fig. 1 - forward current limit vs. ambient temperature 0 20 40 60 80 100 120 140 160 180 0 102030405060708090100 21313 t am b - am b ient temperat u re (c) p v - po w er dissipation (mw) r thja = 230 k/w 0 20 40 60 80 100 120 0 10 203040 50607080 90100 t am b - am b ient temperat u re (c) 21314 i f - for w ard c u rrent (ma) r thja = 230 k/w basic characteristics (t amb = 25 c, unless otherwise specified) parameter test condition symbol min. typ. max. unit forward voltage i f = 100 ma, t p = 20 ms v f 1.3 1.7 v temperature coefficient of v f i f = 100 ma tk vf - 1.3 mv/k reverse current v r = 5 v i r 100 a junction capacitance v r = 0 v, f = 1 mhz, e = 0 c j 30 pf temperature coefficient of e i f = 20 ma tk e - 0.8 %/k angle of half intensity ? 15 deg peak wavelength i f = 100 ma p 950 nm spectral bandwidth i f = 100 ma ? 50 nm temperature coefficient of p i f = 100 ma tk p 0.2 nm/k rise time i f = 100 ma t r 800 ns i f = 1.5 a t r 400 ns fall time i f = 100 ma t f 800 ns i f = 1.5 a t f 400 ns v irtual source diameter d3.8mm
tsus5200, tsus5201, TSUS5202 www.vishay.com vishay semiconductors rev. 2.3, 24-aug-11 3 document number: 81055 for technical questions, contact: emittertechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 basic characteristics (t amb = 25 c, unless otherwise specified) fig. 2 - pulse forward current vs. pulse duration fig. 3 - forward current vs. forward voltage fig. 4 - relative forward voltage vs. ambient temperature fig. 5 - radiant intensity vs. forward current type dedicated characteristics (t amb = 25 c, unless otherwise specified) parameter test condition part symbol min. typ. max. unit forward voltage i f = 1.5 a, t p = 100 s tsus5200 v f 2.2 3.4 v tsus5201 v f 2.2 3.4 v TSUS5202 v f 2.2 2.7 v radiant intensity i f = 100 ma, t p = 20 ms tsus5200 i e 10 20 50 mw/sr tsus5201 i e 15 25 50 mw/sr TSUS5202 i e 20 30 50 mw/sr i f = 1.5 a, t p = 100 s tsus5200 i e 95 180 mw/sr tsus5201 i e 120 230 mw/sr TSUS5202 i e 170 280 mw/sr radiant power i f = 100 ma, t p = 20 ms tsus5200 e 13 mw tsus5201 e 14 mw TSUS5202 e 15 mw t p - p u lse d u ration (ms) 94 7989 10 0 10 1 10 1 10 -1 10 -1 10 0 10 2 10 -2 i- for w ard c u rrent (a) f t p /t = 0.01 i fsm = 2.5 a ( single p u lse ) 0.05 0.1 0.5 1.0 94 7996 10 1 10 0 10 2 10 3 10 4 10 -1 i- for w ard c u rrent (ma) f 4 3 2 1 0 v f - for w ard voltage (v) 0.7 0.8 0.9 1.0 1.1 1.2 v f rel - relati v e for w ard voltage (v) 94 7990 t am b - am b ient temperat u re (c) 100 80 60 40 20 0 i f = 10 ma i f - for w ard c u rrent (ma) 94 7991 10 3 10 1 10 2 10 4 10 0 1 10 100 1000 i - radiant intensity (mw/sr) e tsus5200 tsus 5202 tsus 5201
tsus5200, tsus5201, TSUS5202 www.vishay.com vishay semiconductors rev. 2.3, 24-aug-11 4 document number: 81055 for technical questions, contact: emittertechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 6 - radiant power vs. forward current fig. 7 - relative radiant intens ity/power vs. ambient temperature fig. 8 - relative radi ant power vs. wavelength fig. 9 - relative radiant in tensity vs. angular displacement package dimensions in millimeters - radiant po w er (mw) e i f - for w ard c u rrent (ma) 94 7992 10 3 10 1 10 2 10 4 10 0 0.1 1 10 1000 100 tsus5200 tsus 5202 - 10 10 50 0 100 0 0.4 0.8 1.2 1.6 i e rel ; 140 94 7993 i f = 20 ma e rel t am b - am b ient temperat u re (c) 900 950 0 0.25 0.5 0.75 1.0 1.25 - wa v elength (nm) 1000 94 7994 e rel - relati v e radiant po w er i f = 100 ma 0.4 0.2 0 0.2 0.4 i - relati v e radiant intensity e rel 0.6 94 7995 0.6 0.9 0.8 0 30 10 20 40 50 60 70 80 0.7 1.0 (4.7) 12.5 0.3 a c 35.5 0.55 < 0.7 1.1 0.25 0.5 + 0.15 - 0.05 ? 5 0.15 2.54 nom. 0.5 + 0.15 - 0.05 ? 5.8 0.15 8.7 0.3 7.7 0.15 1 min. area not plane technical dra w ings according to din specifications r 2.49 (sphere) 6.544-5258.02-4 iss u e: 7; 23.07.10 95 10916
legal disclaimer notice www.vishay.com vishay revision: 08-feb-17 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. ? 2017 vishay intertechnology, inc. all rights reserved
|
