View U4324A_8850071.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

keysight u4301a pci express ? 3.0 analyzer module data sheet
introduction keysight solutions for pcie gen1 to gen3 analysis and emulation. C pci express generation 1, 2, & 3 protocol architecture C lane speeds 2.5 gt/s, 5.0 gt/s, and 8.0 gt/s C lane widths x1, x4, x8, and x16 C stimulus response testing with the addition of the u4305a protocol exerciser C nvme device analysis and emulation C compact axie modular system confguration
3 stimulus and test u4305a exerciser C support for gen1 through gen3 and link widths of x1 through x16 C link testing from x1 through x16, using automated ltssm exerciser C pcie, mr-iov, and sr-iov stimulus response testing C invme root complex emulation for test and verifcation of nvme devices C protocol test card (ptc) to measure pcie gen3 dut port and system bios specifcation compliance as defned by the pci sig standards analysis and debug C support for gen1 through gen3, x1 through x16 link width C 4 gb of capture buffer per module C non-intrusive probing that leverages esp technology industry leading probes C the mid-bus probe supports x1 to x16 unidirectional or x1 to x8 bidirectional C the solid slot interposer will support x1 to x16 unidirectional or bidirec - tional C the fying lead solder down probe offers support for x1 & x2 bidirec - tional capability on a single probe. other standard lane width confgu - ration support is x4, x8, & x16 overview product description keysight technologies high speed u4301a pci express ? 3.0 analyzer module is a protocol analyzer supporting all pci express ? applications from gen1 through gen3 and speeds, including 2.5 gt/s (gen1) and 5.0 gt/s (gen2) through pcie 8 gt/s (gen3) and with link widths from x1 to x16. the u4301a analyzer captures and decodes pci express data and displays it in a packet viewer window. the u4301a analyzer is a blade that is installed in an axie two slot m9502a or five slot m9505a. probing is provided by the u4321a solid slot interposer probe, U4324A flying lead solder down probe, or the u4322a mid bus probe based on keysights equalization snoop probe (esp) technology. stimulus and response testing of the pcie system is accomplished with the addition of the u4305a pcie gen3 exerciser. a link training status state machine (ltssm) exerciser provides stimulus for testing pcie links up to the full speed of gen3 systems. the analyzer ltssm overview can pinpoint specific training sequence issues through easy to interpret analysis results. keysights transactional decoder includes a transactional viewer that allows the designer to select transactional queues and performance information from the analyzers nvme transaction overview pane. this organizes the transactions by direction or by queue to follow the data flow across the interface, with one-click control. individual prp (physical region page) lists contain all of the key information of the nvme queues, allowing designers to quickly review and validate the data flows over the pcie connections. the performance analysis package includes the real data throughput calculations, with response-time measurement of the pcie data flow. it allows designers to measure and understand throughput performance, pcie response times, and other operational measurements that provide the insight needed to optimize device performance.
4 system architecture overview confguration step 1 order the u4301a analyzer module select the option for the number of lanes to be tested and software license for 5 gbps or 8 gbps applications refer to ordering information for details step 2 order a modular chassis recommended chassis is the keysight m9502a 2-slot axie chassis or optionally the keysight m9505a 5-slot axie chassis step 3 select a pc controllerkeysight recommends the m9536a embedded controlleror select an external pc that meets the performance requirements as specified in the pxi and axie modular instrumentation, tested computer list technical note ( http://literature.cdn.keysight.com/litweb/pdf/5990-7632en.pdf ). step 4 order the probe for your measurement application C u4321a solid slot interposer 3.0: order the option for the number of lanes to be tested C u4322a mid bus probe based on keysight soft touch technology C U4324A fying lead solder down probe: order the option for the number of lanes to be tested step 5 add the exerciser for stimulus/response testing C u4305 exerciser: order the option for the number of lanes to be tested and software licenses for number of lanes to be tested as well as applications such as end node or root complex emulation, ltssm. mr-iov, or sr-iov emulation 1. note: the slot interposer and exerciser lane width is fixed and is not upgradable due to the connector size being a function of lane width. a smaller lane width probe can be used in a wider lane application, but only those lower lanes will be tested. keysight does not recommend or support the use of lane converters. 1 2 3 4 pc controller to manage and inter - act with the system. pcie gen1 x4 cable from the pc to the chassis 2-slot modular chassis u4301a protocol analyzer module controlled via pcie x4 cable link from the pc controller u4322a soft touch mid-bus probe 3.0
5 u4301a analyzer module effective presentation of protocol interac - tions from physical layer to transaction layer C ltssm overview with full state transaction traffc capture at the phy layer logic sub block C industry standard spreadsheet format protocol viewer with: C highlighting by packet type or direction C easy fow columns to better understand the stimulus and response nature of the protocols C context sensitive columns to show only the relevant information, minimizing the need to scroll horizontally C flexible gui confguration to meet debug needs, with pre-defned gui layouts for link training debug, confg accesses and general i/o product features and benefts overview transaction decode the transaction decode tab in the protocol viewer window allows you to compute and view transactions decoded from the captured pcie traffic. the decoding and display of transactions is done as per the relevant storage protocol specifications such as nvme to help you easily correlate the decoded data to the protocol specifications and evaluate duts compliance to these specifications. transaction decoding of nvme data includes analysis of the trace to identify all of the relevant transactions types to present a transaction overview table that enable quick and easy navigation of key packet types. performance analysis the pcie performance overview tab in the protocol viewer window allows you to perform post process - ing on the captured pcie traffic to generate an offline performance summary of a wide variety of bus traffic including bus utilization and data throughput as well as transaction measures like response times and latency. these performance measures are displayed in tabular as well as charts form. ltssm analysis is easy with detailed tracking of each state transition and that is displayed in a linear state-view, state transition table and state bubble chart. nvme transaction information provides easy to understand displays of nvme payloads and prp messages. transaction overview of all transactions enables instant access to all messages in the capture trace. pcie performance is calculated on bus utilization, throughput, and response times. these views provide the detail needed to calculate the operation performance of any device.
6 simple and powerful state-based triggering C new simple trigger mode makes it easy to setup single event triggers C powerful state-based triggering including C four states supported in trigger sequencer C triggering on patterns (ordered set patterns or packet types) C internal counters and timers C external trigger in/out powerful hardware features ensure capture of important transition events C large capture buffer, for long recording sessions with 4 gb per module (x1-x8 bidirectional) and 8 gb for x16 bidirectional C pcie gen1 x4 link to the host pc, provides up to 10 gb/s of data download saving valuable test time C leds to show lane status and speed for fast under - standing of current link status u4301a analyzer module (continued) product features and benefts overview (continued)
7 u4301a analyzer module characteristics and specifcations C environmental specifcations as per the main frame except maximum operating temperature = 40 c C trigger input: input z = 50 ohms, vmax = 3.3 v C trigger output: 2.0 v C minimum trigger duration: 20 ns host pc requirements select a pc controller--keysight is proud to recommend the m9536a embedded controller--or select an external pc that meets the following performance requirements. keysight has pre-tested a number of external pcs as listed in the pxi and axie modular instrumentation, tested computer list technical note ( http://literature.cdn.keysight.com/litweb/ pdf/5990-7632en.pdf ). C processor speed: 1 ghz 32-bit (x86) or 1 ghz 64-bit (x64) 2 gb minimum available memory running windows xp professional (32-bit) or windows 7 (32-bit or 64-bit); C available hard disc space: 1.5 gb C support for directx 9 graphics with 128 mb graphics memory recommended, (super vga graphics is supported) C microsoft internet explorer 7 or greater C compatible with a pcie gen1 x4 interface module product features and benefts overview (continued) probing accurate data recovery with consistent representation of the signal u4321a slot interposer C esp (equalizing snoop probe) technology ensures accurate data recovery in all gen3 platforms and all link width x1 through x16 C high fdelity signal capture ensures design problems can be reproduced C mechanical stabilization for the device under tests (duts) end point and to ensure frm pcie slot connections characteristics C power: 12 vdc, 1.25a max C power supply; keysight part number 0950-5160 C input: 100 to 250 vac, 50 to 60 hz
8 accurate data recovery with fexible use model u4322a mid bus probe C provides signal capture in situations where no pcie connector is available C micro spring-pin probe based on keysights soft touch technology provides reliable contact to signal pads C independent reference clock per four lanes for maximum layout fexibility characteristics C input: 25v max or 3 vrms into 250 ohms C temperature: operating 0 to 40 c C storage C40 to 70 c C humidity: 15 to 95% non-condensing C altitude: 3,000 m (10,000 ft) accurate data recovery with full channel mapping support & fexible probe points U4324A fying lead solder down probe C provides signal capture in situations where no pcie slot connector or pcie standard mid bus footprint is available. C low channel count per probe to reduce unnecessary expense for unused channel leads C independent reference clock tap for maximum layout fexibility C low cost, easily replaceable n5426a zero insertion force (zif) tips to maximize probe use life characteristics C input: 10 v max common mode C capacitive loading: 0.250 ff C temperature: operating +5 to +40 c C storage: C40 to 70 c C humidity: operating 80% rh @ 40 c C storage: 90% rh @ 65 c C vibration: 2.09 grms (5 to 500 hz random) C shock: 1.6 m/s [63 in/s] (2 ms half sine) product features and benefts overview (continued)
9 n5426a zif tip kit C the zif tip is a connection accessory used to connect the U4324A fying lead cable to the channel on the dut C one side of the zif tip connects to the fying lead and is soldered to the dut on the other end C the zif tip is calibrated to the U4324A fying lead; no impedance changes should take place to the zif tip C 10 zif tips per kit characteristics C input: 10 v max common mode C capacitive loading: 0.250 ff C temperature: operating +5 to +40 c C storage: C40 to 70 c C humidity: operating 80% rh @ 40 c C storage: 90% rh @ 65 c C vibration: 2.09 grms (5 to 500 hz random) C shock: 1.6 m/s [63 in/s] (2ms half sine) thorough link testing u4305a pci exerciser C addition of the u4305a provides pcie,mr-iov and sr-iov stimulus response testing C predefned ltssm sequences simplify state transition testing C predefned protocol test card (ptc) test cases applied to lane 0 only, provide specifcation compliance feedback C full speed testing of gen 1 through gen 3 systems C all lane widths supported at full speed C end point emulation and act as a down stream component (dsc) C root complex emulation and act as an upstream component (usc) specifcations refer to the u4305a data sheet pub number 5990-8458en for detailed characteristics and specifications. product features and benefts overview (continued)
10 related keysight literature publication title pub number hardware and probing for pci express gen3 user's guide available at keysight.com/find/u4301a u4301-97000 pcie 3.0 analyzer user guide u4301-97001 pci express design and test C from electrical to protocol - brochure 5989-5594en u4305a protocol exerciser for pci express ? 3.0 - data sheet 5990-8458en ordering information u4301a analyzer module a specific configuration is required to determine the lane width to be tested. model number description u4301a-a01 link width x1 u4301a-a04 link width x4 u4301a-a08 link width x8 u4301a-a16 link width x16 note: analyzing x16 requires the purchase of two u4301a-a16 modules. u4301a-an2 software license for pcie gen2, 5 gbps u4301a-an3 software license for pcie gen3, 8 gbps u4301a-1fp ltssm software license for fixed node, perpetual u4301a-1np ltssm software license for floating, server based u4301a-2fp performance summary, software license for fixed node, perpetual u4301a-2np performance summary, software license for floating, server based u4301a-3fp transaction decoder, software license for fixed node, perpetual u4301a-3np transaction decoder, software license for floating, server based modular chassis and computer interface the recommended chassis is the 2 slot axie configuration. chassis type model number pc confguration interface cable axie (recommended) m9502a 2 slot axie lap top m9045a y1200a desk top m9047a y1200a probe selection probe type model number description solid slot interposer 8 gbps note: the u4321a interposer probe lane width is fixed and is not upgradable to accommodate different lane widths due to the fact that the connector size is a function of lane width. keysight does not recommend or support the use of lane converters. u4321a-a01 link width x1 u4321a-a04 link width x4 u4321a-a08 link width x8 u4321a-a16 link width x16 mid-bus probe u4322a mid-bus probe based on keysight soft touch technology for applications where no standard pcie connector is available for testing u4322a-r05 set of 5 retention modules u4317a gen3 to gen2 mid bus adaptor flying lead probe U4324A 4 channel/probe n5426a zif tip kit (10 pcs)
11 stimulus/response tester model number description exerciser card pcie exerciser and pcie ltssm exerciser for pcie 3.0, pcie 2.0 and pcie 1.0 note: the u4305a pcie exerciser lane width is fixed and is not upgradable to accommodate different lane widths due to the fact that the connector size is a function of lane width. keysight does not recommend or support the use of lane converters. u4305a-e01 link width x1 u4305a-e04 link width x4 u4305a-e08 link width x8 u4305a-e16 link width x16 u4305a-ex3 software license for the exerciser u4305a-lt3 ltssm software license u4305a-mr2 multi-root visualization software license u4305a-1fp nvme rc exerciser, software license for fixed node, perpetual u4305a-1np nvme rc exerciser, software license for floating, server based u4305a-022 ecrc testing u4305a- 023 sr-iov emulation u4305a-024 increase to 5 function emulation ptc test suite for pcie 3.0 and pcie 2.0 u4305a-021 pcie spec compliance test suite analyzer upgrades model number description u4301u-2fp performance summary, software license for fixed node, perpetual u4301u-2np performance summary, software license for floating, server based u4301u-3fp transaction decoder, software license for fixed node, perpetual u4301u-3np transaction decoder, software license for floating, server based u4301u-afp analyzer software license upgrade x1 to x4 u4301u-bfp analyzer software license upgrade x1 to x8 u4301u-cfp analyzer software license upgrade x1 to x16 u4301u-dfp analyzer software license upgrade x4 to x8 u4301u-efp analyzer software license upgrade x4 to x16 u4301u-ffp analyzer software license upgrade x8 to x16 ordering information (continued)
mykeysight www.keysight.com/find/mykeysight a personalized view into the information most relevant to you. www.axiestandard.org advancedtca ? extensions for instrumentation and test (axie) is an open standard that extends the advancedtca for general purpose and semiconductor test. keysight is a founding member of the axie consortium. atca ? , advancedtca ? , and the atca logo are registered us trademarks of the pci industrial computer manufacturers group. www.lxistandard.org lan extensions for instruments puts the power of ethernet and the web inside your test systems. keysight is a founding member of the lxi consortium. www.pxisa.org pci extensions for instrumentation (pxi) modular instrumentation delivers a rugged, pc-based high-performance measurement and automation system. three-year warranty www.keysight.com/find/threeyearwarranty keysights commitment to superior product quality and lower total cost of ownership. the only test and measurement company with three-year warranty standard on all instruments, worldwide. keysight assurance plans www.keysight.com/find/assuranceplans up to five years of protection and no budgetary surprises to ensure your instruments are operating to specification so you can rely on accurate measurements. www.keysight.com/quality keysight technologies, inc. dekra certified iso 9001:2008 quality management system keysight channel partners www.keysight.com/find/channelpartners get the best of both worlds: keysights measurement expertise and product breadth, combined with channel partner convenience. pci express ? is a registered trademark of pci-sig. www.keysight.com/find/u4301a www.keysight.com/find/u4305a for more information on keysight technologies products, applications or services, please contact your local keysight office. the complete list is available at: www.keysight.com/find/contactus americas canada (877) 894 4414 brazil 55 11 3351 7010 mexico 001 800 254 2440 united states (800) 829 4444 asia pacifc australia 1 800 629 485 china 800 810 0189 hong kong 800 938 693 india 1 800 112 929 japan 0120 (421) 345 korea 080 769 0800 malaysia 1 800 888 848 singapore 1 800 375 8100 taiwan 0800 047 866 other ap countries (65) 6375 8100 europe & middle east austria 0800 001122 belgium 0800 58580 finland 0800 523252 france 0805 980333 germany 0800 6270999 ireland 1800 832700 israel 1 809 343051 italy 800 599100 luxembourg +32 800 58580 netherlands 0800 0233200 russia 8800 5009286 spain 0800 000154 sweden 0200 882255 switzerland 0800 805353 opt. 1 (de) opt. 2 (fr) opt. 3 (it) united kingdom 0800 0260637 for other unlisted countries: www.keysight.com/find/contactus (bp-07-01-14) 12 | keysight | u4301a pci express ? 3.0 analyzer module C data sheet this information is subject to change without notice. ? keysight technologies, 2013 - 2014 published in usa, august 3, 2014 5990-5018en www.keysight.com

▲Up To Search▲

Price & Availability of U4324A

	To Download U4324A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .