89 s m mmit rte 18.0 o r d e r i n g i n f o r m a t i o n s m mmit rte mil-std-1553 dual redundant remote terminal w/integrated bus transceivers & memory ut 69151 - * * * * * radiation: none lead finish: (a) = solder (c) = gold (x) = optional screening: (c) = military temperature (p) = prototype package type: g = 139-pin pga w = 140-pin fp (.025 pitch, ncs) ( go ld only) f = 132-lead fp (gold only) device type modifier: (rte) = +5v operation s mmm it rte mil-std-1553 dual redundant remote terminal w/integrated bus transceivers & memory: smd 5962 - * * * * * lead finish: (a) = solder (c) = gold (x) = optional case outline: x = 139-pin pga y = 140-pin fp (.025 pitch, ncs) (gold only) z = 132-lead fp (gold only) class designator: (q) = class q device type: 01 = +5v operation drawing number: 98587 radiation: none federal stock class designator notes: 1. lead finish (a,c, or x) must be specified. 2. if an ?x? is specified when ordering, part marking will match the lead finish and will be either ?a? (solder) or ?c? (gold). 3. 132 fp and 140fp only available with gold lead finish. notes: 1. lead finish (a,c, or x) must be specified. 2. if an ?x? is specified when ordering then the part marking will match the lead finish and will be either ?a? (solder) or ?c? (go ld). 3. military temperature range flow per utmc?s manufacturing flows documents. devices have 48 hours of burn-in and are tested at -55 c, room temperature, and +125 c. 4. prototypes are produced to utmc?s prototype flow, and are tested at 25 c only. lead finish is gold only. 5. 132 fp and 140 fp only available with gold lead finish.
|