edison base plug fuses C fast-acting, 125 volts, 1/2C12 amps catalog symbol: ? w - (amps) description: bussmann ? series fast-acting edison base plug fuse. specifcations: ratings ? volts 125 vac or less ? amps 1/2 to 12 a ? interrupting rating 10 ka rms sym agency information ? ul ? listed, std. 248-11, guide jefv, file e12112 ? ce catalog numbers (amps) w - 1/2 w - 5 w - 1 w - 6 w - 1-8/10 w - 6-1/2 w - 2 w - 7 w - 2-1/2 w - 8 w - 3 w - 10 w - 4 w - 12 package quantity and weight amp ratings quantity weight per box per card per box per 5 cards 15 to 30 a 4 1 0.96 1.20 w-15, w-20, w-25, and w-30 plug fuses obsoleted suggest replacing with either t-(amp) or tl-(amp) plug fuses both the t and tl bussmann series plug fuses offer similar short-circuit protection to the w plug fuses. in addition, the t and tl plug fuses offer time-delay performance for overload currents (typically between one and six times the rated current of the fuse). for most applications, this feature is preferred to allow harmless inrush currents to pass without causing the fuse to open unnecessarily. the tl plug fuses (data sheet no. 1035) utilize a loaded link construction and provide medium-duty performance. the t plug fuses (data sheet no. 1034) utilize the advanced dual-element design for heavy-duty performance. this construction makes the t plug fuses the preferred selection. for additional information, please see the applicable data sheets. features: ? for lighting, heating or other circuits that do not contain electric motors ? edison base size ? these fuses thread into fuse receptacles or bussmann series box cover units ? the general purpose (w) fuse has no time-delay feature and should not be used in circuits that contain motors recommended fuse holders catalog numbers type box catalog numbers type box sou 2 1/4 handy soy 4 square sru sry ssu ssy sow 2 3/4 handy ssy-rl srw sty ssw scy sox 4 octagon soy-b srx ssn single gang technical data 1036 effective may 2016 supersedes june 2003 bussmann series
edison base plug fuses fast-acting, 125 volts, 1/2-12 amps technical data 1036 effective may 2016 eaton and bussmann are valuable trademarks of eaton in the us and other countries. you are not permitted to use the eaton trademarks without prior written consent of eaton. ul is a registered trademark of the underwriters laboratories, inc. eaton 1000 eaton boulevard cleveland, oh 44122 united states eaton.com bussmann division 114 old state road ellisville, mo 63021 united states eaton.com/bussmannseries ? 2016 eaton all rights reserved printed in usa publication no. 1036 C sb03177 may 2016 for eatons bussmann series product information, call 1-855-287-7626 or visit: eaton.com/bussmannseries follow us on social media to get the latest product and support information. the only controlled copy of this data sheet is the electronic read-only version located on the eaton network drive. all other copies of this document are by definition uncontrolled. this bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. eaton reserves the right, without notice, to change design or construction of?any products and to discontinue or limit distribution of any products. eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. once a product has been selected, it should be tested by the user in all possible applications. time-current curve C average melt 1 10 100 200 0.4 100 10 1 0.1 0.01 time in seconds amp rating 1 3 6 10 current in amps time in seconds
|
