ipsuat series in pressure transducer trinsically safe the series is ideally suited in hazardous ipsuat for use in a wide range of industrial applications areas the probe uses a piezo-resistive sens , within . ceramic or giving excellent media compatibility a stainless steel housing the electronics incorporate a microprocessor based amplifier, requiring no adjusting and giving stable electronics, especially industrial applications. each device is temperature compensated, calibrated and supplied with a traceable serial number and calibration certificate. accuracy < 0. % 25 fs bfsl pressure ranges from vacuum 5800psi to piezo-resistive thick film ceramic sensor stainless steel body performance accuracy (non-linearity <0. % / ( ) & hysteresis) 25 fs bfsl setting errors (offsets) zero & full scale, <0.5% / fs electrical protection supply reverse polarity no damage but also no function electromagnetic compatibility compliant ce mechanical stability shock 100g / 11s vibration 10g (20 - 2000hz) rms environment & thermal effects operating 20 temperature -20oc to +1 oc storage temperature - 0oc to +1 oc 410 compensated temperature range +20oc to + oc 80 thermal zero shift ( ) <0.04% / /oc tzs fs thermal span shift <0.015% /oc permissible environment zone 0 - 6 20oc to + 0oc with patm 0.8 to 1.1 bar material specifications housing stainless steel 316 ?o? ring seals viton diaphragm ceramic al o 96% 23 media wetted parts housing & connection, ?o? ring seal, diaphragm weight approx 100g installation position any operational life > 100x 10 cycles 6 insulation resistance > 50 hms at 50vdc mo www.cynergy3.com ? 2016 cynergy3 components, all rights reserved. specifications are subject to change without prior notice. cynergy3 components and the cynergy3 components logo are trademarks of cynergy3 components limited. iso 9001 certified cynergy3 components ltd. 7 cobham road ferndown industrial estate wimborne, dorset 21 7 bh pe ipsuat 2016 telephone +44 (0) 1202 897969 email:sales@cynergy3.com output signal and supply voltage wire system output supply voltage connection s pin no 2-wire 4-20ma 10-28vdc +ve supply -ve supply ground pin 1 pin 2 earth pin pressure ranges nominal pressure, gauge, 1 0 50 1 00 0 00 psi 15 30 75 50 30 7 5 375 60 compound range psi -15 to 0 -15 to 30 -15 to 75 -15 to 1235 -15 to 285 -15 to 360 permissible overpressure 1 0 0 0 1 00 00 00 0 psi 30 60 5 30 60 5 30 60 975 burst pressure 5 50 1 0 50 500 0 psi 60 7 180 375 7 80 37 7 975 approvals :- atex iece /x ii ex ia t4 ga ta (see schedule) iic
www.cynergy3.com ? 2016 cynergy3 components, all rights reserved. specifications are subject to change without prior notice. cynergy3 components and the cynergy3 components logo are trademarks of cynergy3 components limited. cynergy3 components ltd. 7 cobham road ferndown industrial estate wimborne, dorset 21 7 bh pe telephone +44 (0) 1202 897969 email:sales@cynergy3.com iso 9001 certified ipsuat series in pressure transducer trinsically safe part number pressure rating ipsuat-gp015-5 0-15psi g ipsuat-gp030-5 0-30psi g ipsuat-gp075-5 0-75psi g IPSUAT-C0446-5 -14.5 to +150 psi g ipsuat-gp100-5 0-100psi g ipsuat-gp150-5 0-150psi g ipsuat-c0447-5 -14.5 to +350 psi g ipsuat-gp300-5 0-300psi g ipsuat-gp750-5 0-750psi g ipsuat-gp1k5-5 0-1500psi g ipsuat-gp3k6-5 0-3600psi g ipsuat-gp5k8-5 0-5800psi g mechanical dimensions
|
