suface mount fast recovery rectifier reverse voltage - 50 to 1000 volts forward current - 1.0ampere case : jedec sod-123fl molded plastic body over passivated chip terminals : plated axial leads, solderable per mil-std-750, method 2026 polarity : color band denotes cathode end mounting position : any weight :0.0007 ounce, 0.02 grams glass passivated device ideal for surface mouted applications features mechanical data maximum ratings and electrical characteristics metallurgically bonded construction high temperature soldering guaranteed: 250 c/10 seconds,0.375 ? (9.5mm) lead length, 5 lbs. (2.3kg) tension low reverse leakage ratings at 25 c ambient temperature unless otherwise specified. single phase half-wave 60hz,resistive or inductive load,for capacitive load current derate by 20%. FFM101 thru ffm107 note: 3.measured at 1mhz and applied reverse voltage of 4.0v d.c. 1.averaged over any 20ms period. 2.measured with if=0.5a, ir=1a, irr=0.25a. units volts volts volts amp amps volts a m pf c ns symbols 1000 700 1000 v rrm v rms v dc i (av) i fsm v f 1.0 25.0 1.3 maximum repetitive peak reverse voltage maximum rms voltage maximum dc blocking voltage maximum average forward rectified current at t a =65 c (note 1) peak forward surge current 8.3ms single half sine-wave superimposed on rated load (jedec method) maximum instantaneous forward voltage at 1.0a maximum dc reverse current t a =25 c at rated dc blocking voltage t a =125 c i r 5.0 50.0 f7 t l =25 c maximum reverse recovery time (note 2) typical junction capacitance (note 3) c j operating junction and storage temperature range t j , t stg 15 -50 to +150 500 trr ffm107 100 70 100 400 280 400 200 140 200 600 420 600 f2 f3 f4 f5 800 560 800 f6 50 35 50 f1 FFM101 ffm102 ffm103 ffm104 ffm105 ffm106 150 250 sod-123fl 1.0 0.2 2.8 0.1 1. 8 0.1 cathode band top view 3.7 0.2 0.6 0.25 1. 1 0.15 0.10-0.30 dimensions in millimeters
ratings and characteristic curves FFM101 thru ffm107 the cruve g ra p h is for reference onl y , can't be the basis for j ud g ment ( ? ) !
|
