View SG6105D1Z_8562824.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

product specification power supply supervisor + regulator + pwm sg6105d1 ?system general corp. - 1 - www.sg.com.tw version 1.0(iro33.0023.b1) may 3, 2004 features pc half-bridge (or 494) power supply supervisor + two 431 + pwm high integration & few external components over-voltage protection for 3.3v, 5v and 12v under-voltage protection for 3.3v, 5v and 12v under-voltage protection for ?12v and/or ?5v over-power and short-circuit protection power-down warning circuitry power good circuitry delay time for pson and pg signal remote on/off function on-chip oscillator and error amplifier two shunt regulator for 3.3v and 5v-standby latching pwm for cycle-by-cycle switching push-pull pwm operation and totem pole outputs soft-start and maximum 93% duty cycle applications switching mode power supply for computers, such as: atx nlx sfx (micro-atx) description sg6105d1 controller is designed for switching mode power supply for desktop pcs. it provides all the functions necessary to monitor and control the output of the power supply. remote on/off control, power good circuitry, some protection features against over-voltage and over-power are implemented. it directly senses all the output rails for ovp without the need of external dividers. an innovated ac-signal sampling circuitry provides a sufficient power-down warning signal for pg. a built-in timer generates accuracy timing for control circuit including the ps-off delay. the cycle-by-cycle pwm switching prevents the power transformer from the saturation and ensures the fastest response for the short-circuit protection which greatly reduce the stress for power transistors. two internal precision tl431 shunt regulators provide stable reference voltage and driver for 3.3v and 5v-standby regulation. utilizing minimum number of external components, the sg6105d1 includes all of the functions for push-pull and/or half-bridge topology, decreasing the production cost and pcb space, and increasing the mtbf for power supply. marking diagrams pin configuration t : d = dip p : z = lead free null=regular package xxxxxxx : wafer lot yy : year; ww : week v : assembly location 20 1 sg6105t1p xxxxxxxyywwv 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 pson v33 v5 opp uvac nvp v12 op2 op1 pg fb2 vref2 vref1 fb1 gnd comp in ss ri vcc
product specification power supply supervisor + regulator + pwm sg6105d1 ?system general corp. - 2 - www.sg.com.tw version 1.0(iro33.0023.b1) may 3, 2004 ordering information part number package sg6105d1 20-pin dip SG6105D1Z 20-pin dip(lead free) pin descriptions name pin type function vcc 20 supply supply voltage. 4.5v ~ 5.5v. it is connected to 5v-standby. pg 10 logic output power good logic output, 0 or 1 (open-collector). pg = 1 means that the power is good for operation. the pg delay is 300 msec. v33 2 analog input 3.3v over-voltage/under-voltage control sense input. v5 3 analog input 5v over-voltage/under-voltage control sense input. v12 7 analog input 12v over-voltage/under-voltage control sense input. opp 4 analog input over-power sense input. this pin is connected to driver transformer or the output of current transformer. when not in use, this pin should be grounded. pson 1 logic input remote on/off logic input for cpu or controller. turn on/off the pwm output after the 7.5 msec / 26 msec delay. pson = 0 means that the main smps is operational. pson =1 means that the main smps is off and the latch is reset. nvp 6 analog input the protection input for negative output, such as ?12v and/or ?5v. trip voltage = 2.1v. uvac 5 analog input ac fail detection, detect main ac voltage under-voltage and/or failure. comp 16 analog output error amplifier output and the input of the pwm comparator. in 17 analog input the negative input of error amplifier. the positive input of error amplifier is a 2.5v reference voltage. ss 18 analog input the soft-start. it is settable through external capacitor. the current source output at this pin is 8ua and the voltage is clamped at 2.5v. op1/op2 9/8 analog output the totem-pole output drivers of push-pull pwm. the output are enabled (low) only when the nand gate inputs are high, the maximum duty cycle on an output (op1 or op2) is 46%. fb1 14 analog output output for first converter regulation loop. vref1 13 analog input reference comparison input for first converter regulation loop. 2.5v. fb2 11 analog output output for second converter regulation loop. vref2 12 analog input reference comparison input for second converter regulation loop. 2.5v. ri 19 program. analog input connected to external resistor for the reference setting. ri = 75k ohms. gnd 15 supply ground.
product specification power supply supervisor + regulator + pwm sg6105d1 ?system general corp. - 3 - www.sg.com.tw version 1.0(iro33.0023.b1) may 3, 2004 block diagram ss 2.5v 8ua vcc nvp + 6 delay 7msec buffer 2.1v 3.2v v33 v5 2 3 5v 64ua uvac v12 7 5 uv detector ov protector uv protector comp _ comp + _ comp _ dsd 0.7v + 2ua 2.4v opp 4 buffer vcc pson 1 + 1.4v _ delay 2msec delay 15msec comp _ + delay 7msec on/off delay 26msec 7.5msec comp q d ck r 18 op1 pg 10 ri 19 gnd 15 20 vcc delay 300msec vref delay 3sec fb2 11 vref1 13 fb1 14 vref2 12 + error amp _ comp _ + o.s.c comp 16 17 in q _ ck dq r sq op2 8 9
product specification power supply supervisor + regulator + pwm sg6105d1 ?system general corp. - 4 - www.sg.com.tw version 1.0(iro33.0023.b1) may 3, 2004 timing diagram vcc pson 3.3v,5v,12v t pson(on) t uvp nvp t pson(off) t nvp ss(on/off) t psoff pg t pg vcc pson voltage < v uvac uvac opp t opp ss(on/off) pg
product specification power supply supervisor + regulator + pwm sg6105d1 ?system general corp. - 5 - www.sg.com.tw version 1.0(iro33.0023.b1) may 3, 2004 absolute maximum ratings symbol parameter value unit v cc dc supply voltage at pin 20 16 v v fb shunt regulator output at fb1, fb2 pins 16 v i out output current at pg, fb1, fb2 pins 30 ma p d,25 power dissipation (t a =25 ) 1.5 w p d,90 power dissipation (t a =90 ) 0.5 w t stg storage temperature range -55 to +150 r ja thermal resistance, junction-to-air 82.5 /w t j,max operating junction temperature 150 t a,max operating ambient temperature -30 to +125 t l lead temperature (soldering, 10sec) 260 esd capability, hbm model 3.0 kv note: all voltage values, except differential voltage, are with respect to network ground terminal. recommended operating conditions symbol parameter value unit v cc dc supply voltage at pin 20 4.5 to 5.5 v v fb shunt regulator output at fb1, fb2 pins 4 to 16 v t oper operating ambient temperature range -25 to +85 electrical characteristics (v cc = 5v, t a = 25 c) symbol parameter test condition min. typ. max. unit i cc total supply current pg high - 5 10 ma v ovp1 over-voltage protection 3.3v - 3.9 4.1 4.3 v v ovp2 over-voltage protection 5v - 5.7 6 6.3 v v ovp3 over-voltage protection 12v - 13.75 14.05 14.35 v v uvp1 under-voltage protection 3.3v - 2.0 2.6 2.8 v v uvp2 under-voltage protection 5v - 3.0 3.6 3.9 v v uvp3 under-voltage protection 12v - 6.0 7.2 8.0 v v uvs1 under-voltage sense 3.3v for pg low - 2.5 2.8 3.0 v v uvs2 under-voltage sense 5v for pg low - 4.0 4.3 4.5 v v uvs3 under-voltage sense 12v for pg low - 9.4 10.1 10.4 v v opps * 1 over-power protection. v uvac = 1.5v 2.02 2.4 2.66 v v nvp negative voltage protection: voltage level - 2.0 2.1 2.2 v i nvp negative voltage protection: source current ri = 75k ? 57 64 72 ua t ovp timing for over-voltage protection ri = 75k ? 35 50 65 us t uvp timing for under-voltage protection ri = 75k ? 0.8 2.4 3.75 ms t uvs timing for under-voltage sense for pg low ri = 75k ? 0.37 1.2 1.88 ms t opp timing for over-power-protection ri = 75k ? 3.3 7 11.3 ms t nvp timing for negative voltage protection ri = 75k ? 3.3 7 10.2 ms note *1 : v opps = (2/3) x v opp + (1/3) x v uvac ;
product specification power supply supervisor + regulator + pwm sg6105d1 ?system general corp. - 6 - www.sg.com.tw version 1.0(iro33.0023.b1) may 3, 2004 shunt regulator (fb1, vref1, fb2, vref2) symbol parameter test condition min. typ. max. unit v ref reference voltage i fb = 0.5ma, t a = 25 2.475 2.5 2.525 v v dev, i *2 deviation of v ref over load current i fb = 0.5ma to 10ma - - 20 mv v dev, t * 2 deviation of v ref over temperature t a = -25 to 85 - 10 30 mv r egli-fb *2 line regulation 4 < v fb < 16v - 1 - mv/v i out-fb *2 output sinking current capability v fb > 2v 10 - - ma note *2 : not tested in production test. power good section symbol parameter test condition min. typ. max. unit t pg timing for pg delay ri = 75k ? 200 300 400 ms v uvac uvac voltage sense for pg - 0.65 0.7 0.75 v t r *2 pg good output rising time c l = 100pf - 1 - us t f *2 pg good falling time c l = 100pf - 300 - ns v ol2 power good output saturation level i pg = 5ma - - 0.5 v i on2 power good leakage current collector v pg = 5v - - 1 ua remote on/off symbol parameter test condition min. typ. max. unit v pson pson input threshold level - 1 1.4 2.0 v i pson remote input driving current - - - 0.5 ma t pson(on) t pson(off) timing pson to on/off on off (ps-off) ri = 75k ? 17 5 26 7.5 45 28.8 ms t psoff timing pg low to power off ri = 75k ? 1.5 2 6.3 ms error amplifier symbol parameter test condition min. typ. max. unit v 2.5 reference voltage - 2.45 2.5 2.55 v i ib *2 input bias current - - - 0.1 ua a vol * 2 open-loop voltage gain - 50 60 - db bw * 2 unity gain bandwidth - 0.3 1 - mhz psrr * 2 power supply rejection ratio - 50 - - db oscillator section symbol parameter test condition min. typ. max. unit f osc pwm frequency ri = 75k ? 60 65 70 khz soft-start section symbol parameter test condition min. typ. max. unit i ss charge current ri = 75k ? 6 8 9.3 ua
product specification power supply supervisor + regulator + pwm sg6105d1 ?system general corp. - 7 - www.sg.com.tw version 1.0(iro33.0023.b1) may 3, 2004 comparator section symbol parameter test condition min. typ. max. unit dc duty cycle - 85 - 93 % pwm output section (op1, op2) symbol parameter test condition min. typ. max. unit v ol output voltage low io = 5ma - - 0.5 v v oh output voltage high v12 = 12v 4 - - v r o output impedance of v oh - 1.5 - 3.3 k ?
product specification power supply supervisor + regulator + pwm sg6105d1 ?system general corp. - 8 - www.sg.com.tw version 1.0(iro33.0023.b1) may 3, 2004 application 1 3.3v v33 v5 v12 vcc gnd pg ri pson nvp stby transformer + 5vsb 3.3v fb2 vref1 fb1 opp uvac vref2 -5v -12v pson pok 5vsb main transformer 5v -12v 12v vdd op1 op2 in comp ss 5v 12v sg6106 + + + + 1kohm 47~100ohm sg6105d1
product specification power supply supervisor + regulator + pwm sg6105d1 ?system general corp. - 9 - www.sg.com.tw version 1.0(iro33.0023.b1) may 3, 2004 application 2 12v d38 2 1 5vsb q16 1 3 2 r91 r93 3.3v 5v 3.3v 5v fb2 q17 1 3 2 r89 c45 r96 r74 + c78 + c42 r75 + c77 t6 4 2 3 9 5 10 8 6 u5 1 2 3 4 r100 l17 1 2 d45 2 1 c60 d33 2 1 t7 e16-d 10 8 6 5 4 1 2 r115 + c49 d32 2 1 r104 q14 1 2 3 vz4 1 2 l16 1 2 + c72 uvac r82 3.3vsence r105 c66 d31 2 1 r78 r65 r73 vz3 1 2 r101 r69 r106 r98 r66 + c70 c46 l13 1 2 + c74 r87 r110 r95 vref2 vr3 3 1 2 cn2 1 2 3 r109 u7 lm7905 2 1 3 vi gnd vo + c52 d44 2 1 c61 t8 5 7 14 9 8 13 12 10 11 f2 1 2 l18 1 2 r61 hhv d35 2 1 + c73 -5v hhv l19 1 2 r116 vref2 r90 fb2 r80 -5v c69 c68 r113 u4 sg6848 1 2 3 4 5 6 7 8 gate vdd nc sen ri nc fb gnd pson vref1 vref1 l14 1 2 r77 d46 2 1 c40 + c54 5v op2 opp + c75 op2 r67 bd1 2 1 3 4 r76 l15 1 2 7 8 10 9 3 5 6 4 r94 -12v v5 c58 uvac c47 q13 2 1 3 r84 c63 t5 2 1 3 4 r62 fb1 r111 c48 d42 2 1 q20 1 3 2 + c51 d43 2 1 op1 d29 2 1 r68 d34 2 1 u6 sg6105d1 1 2 3 4 5 6 7 8 13 14 15 16 17 18 19 20 9 10 11 12 pson v33 v5 opp uvac nvp v12 op2 vref1 fb1 gnd comp in ss ri vcc op1 pg fb2 vref2 c56 + c76 r92 d39 2 1 q15 1 3 2 r79 c55 r103 r63 c39 c64 r102 l20 1 2 c67 d37 2 1 q18 1 3 2 + c53 r81 op1 tr2 1 2 fb1 r112 + c79 q19 1 3 2 r97 + c50 r70 c62 d41 c59 r85 + c57 r86 -12v d26 2 1 c65 d27 2 1 + c71 v5 d48 2 1 d40 2 1 d30 2 1 r83 d28 2 1 r88 pg r107 r99 12v c44 12v r64 q12 2 1 3 l11 1 2 d47 2 1 opp r71 l12 1 2
product specification power supply supervisor + regulator + pwm sg6105d1 ?system general corp. - 10 - www.sg.com.tw version 1.0(iro33.0023.b1) may 3, 2004 example of using sg6105d1 for the atx power supply protection against over-voltage, short-circuit and fault conditions is mandatory in pc power supplies. these protection circuits can be realized by using many discrete components and comparators, which occupy a lot of pcb space and also add to assembling costs. this single chip controller ic provides complete protection circuits, shunt regulators, and pwm control function and with less number of components. sg6105d1 is an ideal controller ic for pc switching mode power supplies. the features and benefits of this device are listed below: over-voltage and under-voltage protection for 3.3v, 5v and 12v without external divider over-power protection. uv protection for ?12v and/or ?5v. power-down warning for power good signal. power good signal and power-fail lockup remote on/off control. delay time for pson and ps-off signal. two shunt regulator for 3.3v and 5v-standby regulation. complete pulse width modulation (pwm) control circuitry. on-chip oscillator. programmable soft-start. maximum 93% duty cycle few external components more reliable system little space on pcb easy trouble-shooting and implementation feature descriptions over voltage protection can be implemented without any additional components. over-voltage sense levels or 3.3v, 5v, 12v are 4.1v, 6.1v, 14.5v respectively. over current and/or short circuit protection can also be achieved by using over-power protection, in which opp pin is connected to the current transformer (driver transformer). the power good signal is asserted to indicate the 3.3v, 5v and 12v is above the under voltage threshold level. pg pin goes high when the above condition is reached. a 2k pull up resistor may connect to 5v. the vcc can be supplied from the 5v-standby. when the vcc voltage is higher than 7v, besides the shunt regulator, the circuit of sg6105d1 will be shutdown and reset. no extra power supply is needed. two internal high precision 431 shunt regulators are built-in. it provides stable reference voltages. complete pwm control circuitry including the error amplifier for push-pull or half-bridge operation. supervisory circuit operation the pc generates the remote on/off logic (pson), which is ?low? for power supply ?on? and ?high? to switch off the power supply. the remote on/off is connected to pson input. application guides introduction the application guide shows the key-feature of sg6105d1 and illustrates how to use in an atx switching mode power supply (smps). sg6105d1 is suitable for half-bridge, push-pull topology. it incorporates with a 4-channel supervisor, including 5v-standby. the pwm section of sg6105d1 comprises a built-in 65khz oscillator and high immunity circuits, which protect the system from noise interference and provide more noise margins for improper pcb layout. sg6105d1 has ovp and uvp for 12v, 5v and 3.3v. besides, the nvp is used for negative voltage protection, such as ?12v and/or ?5v. the uvac (ac fails detection) is applied to detect ac line condition. two built-in internal precision tl431 shunt regulators can be used for 3.3v or 5v auxiliary standby power. ac fails detection through a resistor divider, uvac is connected to the secondary power transformer for detecting the ac line condition. once the voltage of uvac is lower than 0.7v for a period of time, such as 200usec, the pg (power good) signal will be pulled low to indicate an ac line power-down condition. the voltage amplitude of the
product specification power supply supervisor + regulator + pwm sg6105d1 ?system general corp. - 11 - www.sg.com.tw version 1.0(iro33.0023.b1) may 3, 2004 + r2 r1 2.1v 64ua -12v -5v pwm switching signal in the secondary power transformer is proportional to the ac line voltage. adjust the ratio of resistor divider to decide the threshold of power-down warning. a small capacitor is connected from uvac to ground for filtering the switching noise. over power protection (opp) the opp (over power protection) is used for detecting over power and/or short-circuit conditions. when opps voltage (p.4, note-1) is higher than 2.1v and this situation existed for longer than 7 msec, 6105d1 will pull the pg low and lock off the power outputs. vdd opp op2 op1 r1 r2 r3 c1 negative voltage protection the nvp provides an uvp (under voltage protection) for negative voltage outputs. an under-voltage represents the phenomenal of the overload condition in negative voltage output. for example, the ?12v output may drop to ?10v during the overload situation. a resistor determining the threshold of the protection is connected from pin nvp to the negative voltage output. via this resistor, nvp outputs a 64ua constant current to the negative voltage output. when the nvp voltage is over 2.1v and the situation kept for longer than 7 msec, 6105d1 will lock the power outputs off. vnvp = 64 ua (r1 + r2) ? v-12v the power outputs will be locked off when vnvp 2.1v. + uvac vo 0.7v r1 r2 c1 vs vin
product specification power supply supervisor + regulator + pwm sg6105d1 ?system general corp. - 12 - www.sg.com.tw version 1.0(iro33.0023.b1) may 3, 2004 mechanical dimensions 20 pins ? dip (d) e b e a a2 e a1 l b b1 10 1 d 20 11 e1 dimension millimeter inch symbol min. t yp . max. min. t yp .max. a 5.334 0.210 a1 0.381 0.015 a2 3.175 3.302 3.429 0.125 0.130 0.135 b 1.524 0.060 b 1 0.457 0.018 d 24.892 26.162 26.924 0.980 1.030 1.060 e 7.620 0.300 e1 6.223 6.350 6.477 0.245 0.250 0.255 e 2.540 0.100 l 2.921 3.302 3.810 0.115 0.130 0.150 e b 8.509 9.017 9.525 0.335 0.355 0.375 ? 0 ? ? ? ? ? ?
product specification power supply supervisor + regulator + pwm sg6105d1 ?system general corp. - 13 - www.sg.com.tw version 1.0(iro33.0023.b1) may 3, 2004 disclaimers life support system general?s products are not designed to be used as components in devices intended to support or sustain human life. use of system general?s products in components intended for surgical implant into the body, or other applications in which failure of the system general?s products could create a situation where personal death or injury may occur, is not authorized without the express written approval of system general?s chief executive officer. system general will not be held liable for any damages or claims resulting from the use of its products in medical applications. military system general's products are not designed for use in military applications. use of system general?s products in military applications is not authorized without the express written approval of system general?s chief executive officer. system general will not be held liable for any damages or claims resulting from the use of its products in military applications. right to make changes system general reserves the right to change this document and/or this product without notice. customers are advised to consult their system general sales representative before ordering.

▲Up To Search▲

Price & Availability of SG6105D1Z

	To Download SG6105D1Z Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .