tel. 1 - 973 - 377 - 9566 fax. 1 - 973 - 377 - 3078 133 kings road madison, new jersey 07940 united states of america www.americanmicrosemi.com dekra certification inc. as9100c and iso 9001:2008 certificate no. 131519.01 ? 2016 american microsemiconductor, inc. specifications are subject to change without notice document page 1 of 7 revised 0 5 /201 6 h21ltb h21lti h21lob h21loi logic output interrupter switch features ? 1.00 mm aperture ? mounting tabs on housing ? choice of inverter or buffer outputs ? choice of open - collector or totem - pole o utput configuration ? ttl/cmos compatible output ? rohs compliant description the h21l series are slotted switches designed for multipurpose non contact sensing. the con - sist of a gaas led and silicon logic output s ensor packaged in an injection molded hous - ing , facing each other across a 3mm gap.the output is either inverting on non inverting, with a choice of totem - pole or open collector confiqura - tion for ttl/cmos compatibility. package dimensions notes 1. dimensions for all drawings are in millimeters. 2. tolerance of . +/ - 0.25mm (0.010) on all non nominal dimensions unless otherwise specified
tel. 1 - 973 - 377 - 9566 fax. 1 - 973 - 377 - 3078 133 kings road madison, new jersey 07940 united states of america www.americanmicrosemi.com dekra certification inc. as9100c and iso 9001:2008 certificate no. 131519.01 ? 2016 american microsemiconductor, inc. specifications are subject to change without notice document page 2 of 7 revised 0 5 /201 6 absolute maximum ratings (t a = 25 o c unless otherwise specified) stresses exceeding the absolute maximum ratings may damage the device. the device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. in addition, extended exposure to stresses above the recommended operat ing conditions may affect device reliability. the absolute maximum ratings are stress ratings only. symbol parameter rating units t opr operating temperature - 40 to +85 o c t stg storage temperature - 40 to +85 o c t sol - i soldering temperature (solder iron) (3,4,5,6) 240 for 5 sec o c t sol - f soldering temperature (solder flow) (3,4.5.6) 260 for 10 sec o c emitter i f continuous forward current (1) 50 ma v r reverse voltage 5 v p d power dissipation (1) 100 mw sensor i o output current 50 ma v cc supply voltage 4.0 - 16 v v o output voltage 30 v p d power dissipation (2) 150 mw notes: 1. derate power dissipation linearly, on emitter, 1.67 mw/ o c above 25 o c. 2. derate power dissipation linearly, 2.50 mw/ o c above 25 o c. 3. rma flux is recommended. 4. methanol or isopropyl alcohols are recommended as cleaning agents. 5. soldering iron tip 1.6mm from housing. 6. as long as leads are not under stress or spring tension input/output table part number led output h21ltb on high h21ltb off low h21lti on low h21lti off high h21lob on high h21lob off low h21loi on low h21loi off high
tel. 1 - 973 - 377 - 9566 fax. 1 - 973 - 377 - 3078 133 kings road madison, new jersey 07940 united states of america www.americanmicrosemi.com dekra certification inc. as9100c and iso 9001:2008 certificate no. 131519.01 ? 2016 american microsemiconductor, inc. specifications are subject to change without notice document page 3 of 7 revised 0 5 /201 6 electrical/optical characteristics cont. (t a = 25 o c ) symbol parameter test condtions min. typ. max. units v cc recommended operating supply voltage i f = 20ma 4.4 5.5 v v f forward voltage i f = 20ma 1.5 v i r reverse leakage current v r = 5v 10 a output (sensor) i cc supply current v cc = 5v 5 ma coupled v ol low level output voltage h21ltb, h21lob i f = 0ma, v cc = 5v, i ol = 16ma 0.4 v low level output voltage h21lti, h21loi i f = 15ma, v cc = 5v, i ol = 16ma 0.4 v oh high level output h21ltb i f = 15ma, v cc = 5v, i oh = \1ma 2.4 v high level output h21lti i f = 0ma, v cc = 5v, i oh = \1ma 2.4 i oh high level output current h21lob i f = 15ma, v cc = 5v, v oh = 30v 100 a high level output current h21loi i f = 0ma, v cc = 5v, v oh = 30v 100 a i f (+) turn on threshold current v cc = 5v 15 ma i f ( - ) turn off threshold current v cc = 5v 0.5 ma i f (+) / i f ( - ) hysteresis ratio 1.2 t plh , t phl propagation delay h21loi, h21lob v cc = 5v, rl = 300 (fig 9) 6 s propagation delay h21lti, h21ltb v cc = 5v, rl = 300 (fig 9) 6 t r , t f output rise and fall time, h21loi, h21lob v cc = 5v, rl = 300 (fig 9) 100 ns output rise and fall time, h21lti, h21ltb v cc = 5v, rl = 300 (fig 9) 70
tel. 1 - 973 - 377 - 9566 fax. 1 - 973 - 377 - 3078 133 kings road madison, new jersey 07940 united states of america www.americanmicrosemi.com dekra certification inc. as9100c and iso 9001:2008 certificate no. 131519.01 ? 2016 american microsemiconductor, inc. specifications are subject to change without notice document page 4 of 7 revised 0 5 /201 6 schematics
tel. 1 - 973 - 377 - 9566 fax. 1 - 973 - 377 - 3078 133 kings road madison, new jersey 07940 united states of america www.americanmicrosemi.com dekra certification inc. as9100c and iso 9001:2008 certificate no. 131519.01 ? 2016 american microsemiconductor, inc. specifications are subject to change without notice document page 5 of 7 revised 0 5 /201 6 typical performance characteristics
tel. 1 - 973 - 377 - 9566 fax. 1 - 973 - 377 - 3078 133 kings road madison, new jersey 07940 united states of america www.americanmicrosemi.com dekra certification inc. as9100c and iso 9001:2008 certificate no. 131519.01 ? 2016 american microsemiconductor, inc. specifications are subject to change without notice document page 6 of 7 revised 0 5 /201 6 switching criteria disclamer american microsemiconductor inc reserves the right to make changes without further notice to any products h erein to improve reliability. function or design american microsemiconductor inc does not ass ume any liability arising out of the application or use of any product or circuit described herein; heither does it convey any license under its patent right s , nor the right of orther s life support policy american microsemiconductors are not authorized for use as critical components in life support devices or systems without the express written approval of the president of american microsem iconductors. as used herein: 1.life support devices or systems are devices or systems 2. a critical component in any component of a life support which, (a) are intended for surgical implant into the body, device or system whose failure to perform can be or (b) support or sustain life, and (c) whose failure to reasonably expected to cause the failure of the life support perform when properly used in accordance with device or system, or to affect its safety or effectiveness. instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user .
tel. 1 - 973 - 377 - 9566 fax. 1 - 973 - 377 - 3078 133 kings road madison, new jersey 07940 united states of america www.americanmicrosemi.com dekra certification inc. as9100c and iso 9001:2008 certificate no. 131519.01 ? 2016 american microsemiconductor, inc. specifications are subject to change without notice document page 7 of 7 revised 0 5 /201 6
|
