bristol, pa 19007-6810 usa tel (215) 781-9956 ? fax (215) 781-9845 printouts of this document may be out of date and should be considered uncontrolled ? info@arieselec.com www.arieselec.com features ? c onvert surface-mount qfp packages to a 13x13 pga footprint. ? r educe costs by using less-expensive qfp packages to replace pga footprints in existing designs. ? p ins are mechanically fastened and soldered to board using aries patented process, creating a reliable electrical connection and rugged contact. ? c onsult factory for panelized form or for mounting of consigned chips. general specifications ? adaptor body : fr-4 with 1-oz. cu traces ? p ads: bare cu protected with entek ? by enthone or immersion white sn to eliminate coplanarity concerns and solder bridges associated with hot air solder leveling ? p ins: brass 360 1/2-hard per uns c36000, astm b16/b16m ? p in plating: 200 [5.08] sn/pb 93/7 per astm b579-73 over 100 [2.54] ni per sae ams-qq-n-290 ? o perating temperature: 221f [105c] mounting considerations ? suggested pcb hole size : 0.028 0.003 [0.71 0.08] dia. ? w ill plug into standard pga socket 18017 rev. aa p/n 95-132i25 jedec 132-position qfp-to-pga adapter 0.025 [0.64] pitch ordering information p/n 95132125 qfp-to-pga 13x13 adapter p/n 995132125-p qfp-to-pga 13x13 panilized form p/n 132pgm13072-30 qfp-to-pga 13x13 wire wrap customization : in addition to the standard products shown on this page, aries specializes in custom design and production. special materials, platings, sizes, and configurations can be furnished, depending on the quantity. note : aries reserves the right to change product general specifications without notice. all dimensions: inches [millimeters] all tolerances: 0.005 [0.13] unless otherwise specified row-to-row and pin-to-pin 0.003 [0.08] consult factory for other sizes and configurations
|