sanken electric co., ltd. r c2 0 61031 1 61426 - 01 scope the present specifications shall apply to an RC2 . outline type silicon rectifier diode structure resin molded applications high frequency rectification, etc. flammability ul94v - 0(equivalent) absolute maximum ratings no. item symbo l unit rating conditions 1 transient peak reverse voltage v rsm v 2000 2 peak reverse voltage v rm v 2000 3 average forward current i f(av) a 0.2 refer to derating curve in section 7 4 peak surge forward current i fsm a 20 10ms. half sine wave, one shot 5 i 2 t limiting value i 2 t a 2 s 2.0 1ms Q Q j c - 40 to +150 7 storage temperature t stg c - 40 to +150 electrical characteristics (ta=25c, unless otherwise specified) no. item symbol unit rating conditions 1 forward voltage drop v f v 2.0 max. i f =0.2a 2 reverse leakage current i r ua 10 max. v r =v rm 3 reverse leakage current under high temperature h ? r ua 300 max. v r =v rm , t j =100 c 4 reverse recovery time trr - 1 s f =i rp =500ma 90% recovery point, t j =25 c trr - 2 s f =0.5a, i rp =1a 75% recovery point ,t j =25 c 5 thermal resistance r th(j - l) c /w 12 max. between junction and lead
sanken electric co., ltd. r c2 0 61031 2 61426 - 01 characteristics i f(av) f forward power dissipation, p f (w) average forward current, i f(av) (a) v r r re verse power dissipation , p r (w) reverse voltage, v r (v) tj= 150 c t/t=1/6 t/t=1/3,sinewave t/t=1/2 dc tj= 150 c 1 - t/t=5/6 sinewave 1 - t/t=2/3 1 - t/t=1/2 0.0 0.5 1.0 0 1000 2000 0.0 0.1 0.2 0.3 0.4 0.5 0.0 0.1 0.2 t t
sanken electric co., ltd. r c2 0 61031 3 61426 - 01 derating tl f(av) vr=2000v average forward current, i f(av) (a) lead temperature , tl ( c ) ta f(av) vr=2000v average forward current, i f(av) (a) ambie n t temperature , ta (c) t/t=1/6 t/t=1/2 dc t/t=1/3 tj= 150 c sinewave t/t=1/6 t/t=1/2 dc t/t=1/3 tj= 150 c sinewave 0.0 0.1 0.2 100 110 120 130 140 150 0.0 0.1 0.2 0 50 100 150 t t
sanken electric co., ltd. r c2 0 61031 4 61426 - 01 package information - package type, physical dimensions and material *1 the allowance position of body against the center of whole lead wire is 0.5mm(max.) *2 the centric allowance of lead wire against center of physical body is 0. 3 mm(max.) *3 the burr may exit up to 2mm from the body of lead dimensions in mm - appearance the body shall be clean and shall not bear any stain, rust or flaw. - marking type numbe r r c 2 lot number 1 first digit: last digit of year second digit: month from 1 to 9 for jan. to sep. o for oct., n for nov., and d for dec. lot number 2 (ten days) ? top of the month ?? middle of month ??? end of month cathode mark `?? cathode band 2 62.5 0.7 4.0 0.2 0.78 0.05 7.2 0.2 1 3
|
