www.micropowerdirect.com micropower direct 292 page street suite d stoughton, ma 02072 usa t: (781) 344-8226 f: (781) 344-8481 e: sales@micropowerdirect.com w: www.micropowerdirect.com MACFM-02B key features: ? 85 to 305 vac input ? compact case ? 30 db attenuation ? -40c to +85c operation ? chassis mount option ? din rail mount option ? low cost input parameter conditions min. typ. max. units input voltage range, see note 1 85 305 vac nominal current, see note 2 1.5 a general parameter conditions min. typ. max. units test voltage 60 sec, 1 ma leakage current 2,000 vac frequency attenuation 30 db conducted emissions en 55022 class b surge en 61000-4-5 criteria b; 2 kv (1.2 s/50 s 2) criteria b; 6 kv (1.2 s/50 s 12) parameter conditions min. typ. max. units operating temperature range ambient -40 +25 +85 c storage temperature range -55 +125 c cooling free air convection humidity rh, non-condensing 95 % physical case size module see mechanical drawing (page 2) chassis (a2) mount see mechanical drawing (page 2) din (a4) mount see mechanical drawing (page 2) case material non-conductive black plastic (ul94-v0) weight module 1.77 oz (50g) chassis (a2) mount 2.48 oz (70g) din (a4) mount 3.19 oz (90g) electrical speci? cations speci cations typical @ +25?, nominal input voltage & rated output current, unless otherwise noted. speci cations subject to change without notice. wide input, ac encapsulated emc filter module schematic typical connection MACFM-02B ? lter modules operate with many standard mpd ac/dc power supplies. with these modules, most ac power supplies will meet the surge require- ments of en 61000-4-5 and the ems requirements of en 55022. contact the factory for information on our full range of ? lter products. notes: 1. the max input voltage level of the power supply must be less than the maximum speci ed input of the MACFM-02B. 2. the max input current of the power supply must be less than the maximum speci ed nominal current of the MACFM-02B.
micropower direct we power your success - for less! 292 page street ste d stoughton, ma 02072 ? tel: (781) 344-8226 ? fax: (781) 344-8481 ? e-mail: sales@micropowerdirect.com www.micropowerdirect.com for the chassis mount option, add suf? x ?a2? to the model number (i.e. MACFM-02B-a2) w ww.m i cropower di rect.co m www.micropowerdirect.com mechanical dimensions mechanical dimensions: with chassis mount option (a2) pin function 1 gnd 2in (n) 3in (l) 4 out (l) 5 out (n) pin con nec tions the MACFM-02B is available mounted on an adapter plate for mounting to a chassis or on a din rail. mechanical dimensions for these adapters are shown at right. the photo below shows a product mounted on a similar adapter. please contact the factory for more information. mechanical dimensions: with din rail option (a4) pin function 1 gnd 2in (n) 3in (l) 4 out (l) 5 out (n) connection is the same for a2 & a4 pin con nec tions for the din rail mount option, add suf? x ?a4? to the model number (i.e. MACFM-02B-a4) notes: all dimensions are typical in inches (mm) tolerance x.xx = ?.02 (?.50) wire range for a2 & a4 connection is 24 - 12 awg
|
