10/100 industrial media converter, sc sm 20km, -40 to 75c iec61850 overview levelone IEC-1820 is an industrial fast ethernet media converter with a rugged aluminium case which providing superb heat dissipation. this converter is designed to be mounted on an industrial standard din-rail, plus the clearly visible status leds provide simple monitoring of port link activity. it also features link fault pass through in order to alert remote location when link status changes. substation & railway applications this device is complied with iec 61850-3 / ieee 1613 for the power substations and en 50121-4 for the railway applications. iec 61850-3 is an international standard for electrical substation systems. the standard enables integration of all control, measurement, monitoring and protection functions within a substation. features - complies with iec61850-3 and ieee1613 environmental requirements for power substation automation systems - complies with nema ts1 & ts2 environmental requirements for tra c control equipment - 100base-fx single-mode re for the link up to 20 kilometers - dip switch con guration for "link-fault-pass-through," link down alarm, speed, duplex mode - 128k bits bu er memory - 10/100mbps-full/half-duplex, auto-negotiation, auto-mdi/mdix - full wire-speed forwarding rate - alarms for power and port link failure by relay output - -40c to 75c (-40f to 167f) operating temperature range, tested for functional operation @ -40c to 85c (-40f to 185f) - ip30 aluminum case - supports din-rail mounting installation fault detection relay contact sends alert signal when the power failed or a port link disconnected, therefore the system operator can respond quickly. this relay contact can be easily con gured with a simple dip switch. plug & play this industrial media converter is designed for the demanding industrial environments at businesses in need of instant connectivity with no setup or con gure required, truly plug and play. high reliability all components are built to withstand harsh environment applications without compromise where humidity, temperature variation and even shock vibration are concerns, including electric & utility, critical infrastructure, transportation and surveillance security. this device operates under -40 to 75 celsius (-40 to 167 fahrenheit) temperature. safety complies with nema (national manufacturers association) ts1 & ts2 environmental certi ed for the tra c control equipment that withstand extreme temperatures, operating voltage and humidity uctuation, vibration and shock commonly experienced in severe outdoor environments. IEC-1820 diagrams unit: mm side buttom back top front 50 13 5 11 0 po we r1 po we r 2 po wer 3 + - + -
order information IEC-1820 - 10/100 industrial media converter, sc sm 20km, -40 to 75c iec61850 speci cations package contents IEC-1820 quick installation guide www.level1.com one world_one brand_one level_ mtbf t echnology standards ieee802.3 10base-t , ieee802.3u 100base-tx/100base-fx, ieee802.3x forward and filtering rate 14,880pps for 10mbps 148,810pps for 100mbps packet buf fer memory 128k bits processing t ype store-and-forward half-duplex back-pressure and ieee802.3x full-duplex flow control environment operating t emperature -40c to 75c (-40f to 167f) t ested @ -40c to 85c (-40f to 185f) storage t emperature -40c to 85c (-40f to 185f) ambient relative humidity 5% to 95% (non-condensing) regulatory approvals iso manufactured in an iso9001 facility safety ul508 emi fcc part 15, class a en61000-6-4 - en55022 - en61000-3-2 - en61000-3-3 ems iec61850-3 & ieee1613: substation & power automa- tion applications en50121-4: railway applications en61000-6-2 - en61000-4-2 (esd standards) contact: + / - 8kv air: + / - 15kv - en61000-4-3 (radiated rfi standards) 35v/m, 80 to 1000mhz; 80% am - en61000-4-4 (burst standards) signal ports: + / - 4kv d.c. power ports: + / - 4kv - en61000-4-5 (surge standards) signal ports: + / - 2kv ; line-to-line d.c. power ports: + / - 2kv ; line-to-earth - en61000-4-6 (induced rfi standards) signal ports: 10v rms @ 0.15 - 80mhz; 80% am d.c. power ports: 10v rms @ 0.15 - 80mhz; 80% am - en61000-4-8 (magnetic field standards) 1000a/m @ 50, 60hz environmental t est compliance iec60068-2-6 fc (v ibration resistance) 5g @ 10 - 150hz, amplitude 0.35mm (operation/storage/ t ransport) iec60068-2-27 ea (shock) 25g @ 1 1ms (half-sine shock pulse; operation) 50g @ 1 1ms (half-sine shock pulse; storage/t ransport) fed std 101c method 5007.1 (free fall w/ package) -t ested with cross w eight and drop high standard table power input input v oltage: 12 to 48vdc (t erminal block) / 12vdc(dc jack) power consumption 2.4w max. 0.2a @ 12vdc, 0.05a @ 48vdc overload current protection present reverse polarity protection present mechanical casing aluminum case ip30 dimensions 50mm (w) x 1 10mm (d) x 135mm (h) (1.97" (w) x 4.33" (d) x 5.31" (h)) w eight 0.8kg (1.76lbs.) installation din-rail (t op hat type 35mm), panel, rack mounting interface ethernet port 10/100base-tx: 1 port 100base-fx: 1 port led indicators per unit: power status (power 1, power 2, fault), link-fault-pass-through per port: 10/100tx: link/activity , full-duplex/collision, speed 100fx: link/activity , full-duplex/collision relay contact relay contact rating with current 1a @ 30vdc, 0.5a @ 120v ac 55.10 years
|
