model. no. rev. ningbo foryard optoelectronics co.,ltd add: no.115 qixin road ningbo zhejiang china zip: 315051 tel: 0086-574-87933652 87927870 87922206 fax: 0086-574-87927917 e-mail: sales@foryard.com ( general) http://www.foryard.com page 1/8 emitting color:blue smt package http://www.foryard.com approved by applications: decorative lighting architectural lighting interior automotive FYLP-5W-UBL a features: illuminations rohs compliant product specification model no. FYLP-5W-UBL customer approved signatures high-power led type size (mm): ? 6*6.0 checked by prepared by
model. no. rev. mechanical dimensions notes: 1. dimension in millimeter, tolerance is 0.2mm. 3.the specifications,characteristics and technical data described in the datasheet are subject to chan ge without prior notice. page 2/8 http://www.foryard.com FYLP-5W-UBL a model no. FYLP-5W-UBL
model. no. rev. min. typ. 2.80 --- 465 --- --- 30 --- 120 page 3/8 http://www.foryard.com storage temperature typical electrical &optical charcteristics(ta=25oc ) tstg forward current(dc) pd ma model no. FYLP-5W-UBL items unit a FYLP-5W-UBL absolute maximun ratings(ta=25 o oo o c) *pulse width Q QQ Q 1msec duty Q QQ Q 1/10 peak forward current* 1200 symbol if soldering temperature vr tsol ifp power dissipation operation temperature topr reverse voltage nm lm 1300 5000 -40 o c+85 o c absolute maximum rating ma max unit reflow soldering:260 /3sec v mw condition 5 v ir (d) u a -40oc+100oc v vr = 5v if = 1200ma if = 1200ma 4.00 if = 1200ma luminous flux symbol vf 5 475 --- items forward voltage reverse current dominant wavelength --- deg material 2? if = 1200ma 50% power angle chip item reflector wire encapsulate 1.luminous intensity is based on the for yard standards. material ppa gold silicone ingan note: 2.pay attention about static for ingan
model. no. rev. typical eletrical/optical characteristics curves(t a=25 o oo o c unless otherwise noted) radiation pattern. page 4/8 http://www.foryard.com FYLP-5W-UBL a model no. FYLP-5W-UBL relative lumionous intensity(lop @max=1) i n g a n / a l 2 o 3
model. no. rev. packing diagram note: the specifications are subject to change with out notice. please contact us for updated informati on. page 5/8 a FYLP-5W-UBL model no. FYLP-5W-UBL http://www.foryard.com
model. no. rev. packing diagram note: the specifications are subject to change with out notice. please contact us for updated informati on. page 6/8 model no. FYLP-5W-UBL http://www.foryard.com FYLP-5W-UBL a foryard o p t o e l e c t r o n i c s www.foryard.com foryard o p t o e l e c t r o n i c s led led led led pn:fylp-xxxxxxxx-xx qty:xxxxx pcs date:xxxx/xx/xx gw: xx kg nw: xx kg xxxxxxxxxx rohs rohsrohs rohs attention attention attention attention qc: qc pass reel part no: fylp-xxxxxx xxxx/xx/xx foryard qc: qc pass xxxxxxxxxx rohs rohsrohs rohs outside label outside label
model. no. rev. precautions for use: page 7/8 high-power leds must be used within 24 hours. if t he leds are not within 24 hours after removal from the bag , frequently during the baking process. (1) manual soldering with a soldering iron model no. FYLP-5W-UBL http://www.foryard.com 2. soldering FYLP-5W-UBL a before opening the packaging , check for air leaks in the bag. baking is required take the material out of the pac kaging bag before baking. do not open the oven door use a soldering iron of less than 25 watts is recom mended . the iron temperature must be kept below 3 15 handling of an high-power led should be done only w hen the package has been cooled down to below 40 and soldering time no more than 2 seconds. the epoxy resin of an high-power led should not con tact the tip of the soldering iron. 1. storage no mechanical stress should be exerted on the resin portion of an high-power led during soldering. (2)reflow soldering temperature profile after the bag is opened, the high-power leds must b e stored at <30 and < 60% rh. under these conditions, to prevent moisture absorption into high-power leds during the transportation and storage , the leds a re packed required if the shelf life has expired secondary protection in a moisture-barrier bag. desiccants and a humidit y indicator are packed together with the leds as the shelf life of leds stored in the original seale d bag at <40 and < 90% rh is 12 months. baking is peak temperature temperature pre-heat soak reflow cooling time melting-point
model. no. rev. page 8/8 high-power led should not be modified afte r soldering. if modification cannot be avoided, the modification http://www.foryard.com preheat time:100seconds.max ramp-down rate:6 /sec.max peak temperature:230 duration above 183 is 80 sec. max FYLP-5W-UBL a average ramp-up rate:4 /sec.max peak preheat temperature:100-150 average ramp-up rate:4 /sec.max solder= pb-free peak preheat temperature:100-150 time within 5 of actual peak temperature=10 sec. max ramp-down rate:6 /sec.max peak temperature:250 model no. FYLP-5W-UBL solder=sn63-pb37 preheat time:100seconds.max must be pre-qualified to avoid damage to t he high-power leds. reflow soldering should not be done more t han one time no stress should be exerted on the package during soldering. time within 5 of actual peak temperature=10 sec. max (3) recommend soldering pad design(unit=mm) duration above 217 is 80 sec. max high-brightness led light may injure human eyes. av oid looking directly into lighted led static electricity and surge voltage damage the led s. so it is recommended that an esd wrist band, reverse voltage should not exceed the absolute maxi mum rating on the data sheet. the colour of the le ds the influence of ultrasonic cleaning on the leds de pends on factors such as ultrasonic power and the w ay. the appearance and specifications of the product ma y be modified for improvement without notice. 3. static electricity esd shoe strap or an anti-electrostatic glove be us ed when handling the leds. when washing is required, ipa (isopropyl alcohol) s hould be used. all devices, equipment and machinery must be proper ly grounded 4. others is changed slightly an operating current and therm al. this device should not be used in any type of fluid such as water, oil, organic solvent and etc
|
