model. no. rev. ningbo foryard optoelectronics co.,ltd add: no.115 qixin road ningbo zhejiang china zip: 315051 tel: 0086-574-87933652 87927870 87922206 fax: 0086-574-87927917 e-mail: sales@foryard.com ( general) http://www.foryard.com page 1/8 product specification model no. FYLP-1W-UBB customer approved signatures high-power led type size (mm): ? 6*5.1 checked by FYLP-1W-UBB a features: illuminations rohs compliant http://www.foryard.com approved by applications: decorative lighting architectural lighting interior automotive prepared by emitting color:blue smt package
model. no. rev. mechanical dimensions notes: 1. dimension in millimeter, tolerance is 0.2mm. 3.the specifications,characteristics and technical data described in the datasheet are subject to chan ge without prior notice. page 2/8 model no. FYLP-1W-UBB FYLP-1W-UBB a http://www.foryard.com
model. no. rev. min. typ. 2.80 --- 465 --- --- 15 --- 120 page 3/8 ingan 2.pay attention about static for ingan 1.luminous intensity is based on the for yard standards. material ppa gold silicone http://www.foryard.com note: chip item reflector wire encapsulate --- deg material 2? if = 350ma 50% power angle luminous flux symbol vf 5 475 --- items forward voltage reverse current dominant wavelength v ir (d) v vr = 5v if = 350ma if = 350ma 4.00 if = 350ma u a v mw condition 5 1000 -40 o c+85 o c ma 500 absolute maximum rating 350 symbol if ifp power dissipation operation temperature topr reverse voltage peak forward current* *pulse width Q QQ Q 1msec duty Q QQ Q 1/10 soldering temperature vr tsol FYLP-1W-UBB model no. FYLP-1W-UBB items unit a absolute maximun ratings(ta=25 o oo o c) -40oc+100oc nm lm max unit hand soldering:250 /10sec storage temperature typical electrical &optical charcteristics(ta=25oc ) tstg forward current(dc) pd ma
model. no. rev. typical eletrical/optical characteristics curves(t a=25 o oo o c unless otherwise noted) radiation pattern. page 4/8 model no. FYLP-1W-UBB FYLP-1W-UBB a http://www.foryard.com relative lumionous intensity(lop @max=1) i n g a n / a l 2 o 3
model. no. rev. packing diagram note: the specifications are subject to change with out notice. please contact us for updated informati on. page 5/8 FYLP-1W-UBB model no. FYLP-1W-UBB http://www.foryard.com a
model. no. rev. packing diagram note: the specifications are subject to change with out notice. please contact us for updated informati on. page 6/8 FYLP-1W-UBB a model no. FYLP-1W-UBB http://www.foryard.com foryard o p t o e l e c t r o n i c s www.foryard.com foryard o p t o e l e c t r o n i c s led led led led pn:fylp-xxxxxxxx-xx qty:xxxxx pcs date:xxxx/xx/xx gw: xx kg nw: xx kg xxxxxxxxxx rohs rohsrohs rohs attention attention attention attention qc: qc pass reel part no: fylp-xxxxxx xxxx/xx/xx foryard qc: qc pass xxxxxxxxxx rohs rohsrohs rohs outside label outside label
model. no. rev. precautions for use: page 7/8 to prevent moisture absorption into high-power leds during the transportation and storage , the leds a re packed required if the shelf life has expired secondary protection in a moisture-barrier bag. desiccants and a humidit y indicator are packed together with the leds as the shelf life of leds stored in the original seale d bag at <40 and < 90% rh is 12 months. baking is no mechanical stress should be exerted on the resin portion of an high-power led during soldering. (2)reflow soldering temperature profile 1. storage FYLP-1W-UBB a 2. soldering before opening the packaging , check for air leaks in the bag. (1) manual soldering with a soldering iron model no. FYLP-1W-UBB http://www.foryard.com handling of an high-power led should be done only w hen the package has been cooled down to below 40 baking is required take the material out of the pac kaging bag before baking. do not open the oven door use a soldering iron of less than 25 watts is recom mended . the iron temperature must be kept below 3 15 and soldering time no more than 2 seconds. the epoxy resin of an high-power led should not con tact the tip of the soldering iron. after the bag is opened, the high-power leds must b e stored at <30 and < 60% rh. under these conditions, high-power leds must be used within 24 hours. if t he leds are not within 24 hours after removal from the bag , frequently during the baking process. peak temperature temperature pre-heat soak reflow cooling time melting-point
model. no. rev. page 8/8 this device should not be used in any type of fluid such as water, oil, organic solvent and etc high-brightness led light may injure human eyes. av oid looking directly into lighted led the appearance and specifications of the product ma y be modified for improvement without notice. 3. static electricity esd shoe strap or an anti-electrostatic glove be us ed when handling the leds. when washing is required, ipa (isopropyl alcohol) s hould be used. all devices, equipment and machinery must be proper ly grounded 4. others is changed slightly an operating current and therm al. the influence of ultrasonic cleaning on the leds de pends on factors such as ultrasonic power and the w ay. duration above 217 is 80 sec. max model no. FYLP-1W-UBB solder=sn63-pb37 peak preheat temperature:100-150 preheat time:100seconds.max must be pre-qualified to avoid damage to t he high-power leds. ramp-down rate:6 /sec.max peak temperature:250 static electricity and surge voltage damage the led s. so it is recommended that an esd wrist band, reverse voltage should not exceed the absolute maxi mum rating on the data sheet. the colour of the le ds reflow soldering should not be done more t han one time no stress should be exerted on the package during soldering. time within 5 of actual peak temperature=10 sec. max (3) recommend soldering pad design(unit=mm) time within 5 of actual peak temperature=10 sec. max average ramp-up rate:4 /sec.max peak preheat temperature:100-150 average ramp-up rate:4 /sec.max solder= pb-free FYLP-1W-UBB a preheat time:100seconds.max ramp-down rate:6 /sec.max peak temperature:230 duration above 183 is 80 sec. max high-power led should not be modified afte r soldering. if modification cannot be avoided, the modification http://www.foryard.com
|
