1 all specifications are subject to change without notice. fd 2.5v rev2008_dec04_01.4 saronix-ecera? is a pericom? semiconductor company ? us: +1-408-435-0800 tw: +886-3-4518888 ? www.saronix-ecera .com 2 . 5 v c m o s l o w j i t t e r x o 2.5v cmos low jitter xo fd series crystal clock oscillator (xo) legacy s1634 series 5.0 x 3.2mm fd product features 1 to 133 mhz frequency range ? <1 ps rms jitter with fundamental or ? overtone design low power standby mode ? pb-free and rohs/green compliant ? product description the fd series 2.5v crystal clock oscillator achieves superb jitter and stability over a broad range of operating conditions and frequencies. the output clock signal, generated internally with a non-pll oscillator design, is compatible with lvcmos/lvttl logic levels. the device, available on tape and reel, is contained in a 5.0 x 3.2mm surface-mount ceramic package. applications the fd series is ideal for compact, high- density applications requiring low jitter or tight stability, including: ethernet ? epon ? fibre channel ? serial attached scsi (sas) ? server & storage platforms ? sonet/sdh linecards ? t1/e1, t3/e3 linecards ? dslam ? 802.11a/b/g wifi ? package: pin functions: pin function 1oe function 2ground 3clock output 4v dd recommended land pattern: 5.0 x 3.2mm ceramic smd part ordering information: fd xxx yyyy a: product family b: xxx = frequency code c: yyyy = specification code following the above format, saronix-ecera part numbers will be assigned upon confirmation of exact customer requirements. legacy ordering information - for reference only: frequency stability a = 25 ppm (-20 to +70 c) b = 50 ppm (-20 to +70 c) e = 50 ppm (-40 to +85c) saronix product series s - 125.000 (t) output frequency (mhz) packaging 1634 b (t) = tape & reel full reel increments blank = bulk packaged
2 all specifications are subject to change without notice. fd 2.5v rev2008_dec04_01.4 saronix-ecera? is a pericom? semiconductor company ? us: +1-408-435-0800 tw: +886-3-4518888 ? www.saronix-ecera .com 2 . 5 v c m o s l o w j i t t e r x o 2.5v cmos low jitter xo fd series crystal clock oscillator (xo) legacy s1634 series | 5.0 x 3.2mm fd output enable / disable function parameter min. typ. max. units notes input voltage (pin 1), output enable 0.7 v or open input voltage (pin 1), output disable (low power standby) 0.3 v output is hi-z internal pullup resistance 50 k output disable delay 100 ns output enable delay 10 ms electrical performance parameter min. typ. max. units notes output frequency 1 133 mhz as speci ed supply voltage 2.25 2.50 2.75 v supply current, output enabled 15 ma 1 to 32 mhz 25 32 to 50 mhz 35 50 to 133 mhz supply current, standby mode 10 aoutput hi-z frequency stability 20 to 50 ppm see note 1 below operating temperature range -20 +70 c commercial (standard) -40 +85 industrial (standard) output logic 0, v ol 10% v dd v output logic 1, v oh 90% v dd v output load 15 pf see note 2 below duty cycle 45 55 % measured 50% v dd rise and fall time up to 32 mhz 7 ns measured 20/80% of waveform 32 to 70 mhz 5 70 to 133 mhz 2.5 jitter, phase 1 to 133 mhz 1 ps rms (1- ) 10khz to 20 mhz frequency band jitter, accumulated up to 70 mhz 5 ps rms (1- ) 20.000 adjacent periods 70 to 133 mhz 3 jitter, tot al up to 70 mhz 50 ps pk-pk 100.000 random periods 70 to 133 mhz 30 notes: 1. stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial ca libration tolerance (25c), aging (1 year at 25c average effective ambient temperature), shock and vibration. 2. for speci cations othere than those listed, please contact sales. absolute maximum ratings parameter min. typ. max. units notes storage temperature -55 +125 c
3 all specifications are subject to change without notice. fd 2.5v rev2008_dec04_01.4 saronix-ecera? is a pericom? semiconductor company ? us: +1-408-435-0800 tw: +886-3-4518888 ? www.saronix-ecera .com 2 . 5 v c m o s l o w j i t t e r x o 2.5v cmos low jitter xo fd series crystal clock oscillator (xo) legacy s1634 series | 5.0 x 3.2mm fd reliability test ratings this product is rated to meet the following test conditions: type parameter test condition mechanical shock mil-std-883, method 2002, condition b mechanical solderability jesd22-b102-d method 2 (preconditioning e) mechanical terminal strength mil-std-883, method 2004, condition d mechanical gross leak mil-std-883, method 1014, condition c mechanical fine leak mil-std-883, method 1014, condition a2 (r 1 = 2x10 -8 atm cc/s) mechanical solvent resistance mil-std-202, method 215 environmental thermal shock mil-std-883, method 1011, condition a environmental moisture resistance mil-std-883, method 1004 environmental vibration mil-std-883, method 2007, condition a environmental resistance to soldering heat j-std-020c table 5-2 pb-free devices (2 cycles max) test circuit power supply output enable / disable function 0.1 f or 0.01 f test point 1 2 3 4 15 pf (including probe and fixture capacitance) re ow soldering pro le peak 260c for 10 sec max 260 temperature ? c 1 to 3c/sec max 60 to 90 sec time 1 to 3c/sec 217 4 to 6 minutes max as per ipc/jedec j-std-020c
|