shielded contacts b-12 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2011 glenair, inc. printed in u.s.a. cage code 06324 www.glenair.com e-mail: sales@glenair.com b m39029/103 852-005 size 12 coaxial socket size #12 coaxial socket contacts for mil-dtl-38999 series i, iii and iv connectors type cable accommodation part number military part number color band 1st 2nd 3rd socket m17/113-rg316 m17/094-rg179 852-005-12-559 m39029/103-559 green green white d38999 ser. i, iii, iv shield crimp sleeve inner pin contact ? h min ? j max ? l min n p 32 ? v k thru one wall only radial location optional .022 .013 ? spherical radius inner pin contact shield crimp sleeve outer contact barrel ? e ? f ? z max ? d min ? c ? a .166 min depth ? g after crimp .067 min bin color bands (see table) r .003 max .033 .029 .626 .620 47 43 x * .896 max r .002 min .585 min these contacts ofer improved frequency response compared to standard coaxial contacts. vswr is 1.32:1 at 3ghz . nominal impedance is 50 ohms. insertion loss at 3ghz is 0.20 db maximum. inner contact is rated at 1 amp, the outer contact 12 amps. dwv voltage rating is 1000 vac rms sea level, 250 vac at 50,000 feet. contacts are packaged individually and shipped unassembled with instruction sheet. inner and outer contacts are gold-plated copper alloy. 5000 megohm insulation resistance.
shielded contacts b-13 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2011 glenair, inc. printed in u.s.a. cage code 06324 www.glenair.com e-mail: sales@glenair.com b m39029/103 852-005 size 12 coaxial socket table iii inner contact outer contact insertion tool extraction tool basic crimping tool positioner basic crimping tool die daniels mh992 m22520/2-34 m22520/5-01 m22520/5-03 m81969/8-09 or m81969/14-04 m81969/8-10 or m81969/14-04 note: may be crimped or soldered table i bin code ?a ?c ?d ?e ?f ?g max ?h max ?j max 559 .160 (4.06) .158 (4.01) .123 (3.1) .118 (3.0) .069 (1.8) .066 (1.7) .151 (3.84) .148 (3.76) .182 (4.62) .179 (4.55) .156 (4.0) .127 (3.2) .169 (4.3) table i (continued) bin code k ?l min n p ? v x ?z max 559 .180 (4.6) .170 (4.3) .022 (.6) .100 (2.5) .084 (2.1) .088 (2.2) .063 (1.6) .0205 (.52) .0195 (.50) .613 (15.6) .603 (15.3) .110 (2.8) material and finish contact body: copper alloy/gold plated hood: stainless steel/passivated center contact: copper alloy/gold plated crimp sleeve: copper alloy/gold plated insulator: tefon * i ndicates point at which a square ended pin of the same basic diameter as the mating contact frst engages the outer contact spring
|
