specification model dc voltage rated current rated power output voltage adj. range note.5 current adj. range line regulation load regulation setup, rise time hold up time (typ.) voltage range note.4 frequency range power factor (typ.) efficiency (typ.) ac current (typ.) input inrush current ( .) typ leakage current safety standards note.6 working temp. working humidity storage temp., humidity temp. coefficient vibration mtbf dimension others note packing over current over voltage over temperature can be adjusted by internal potentiometer or through output cable 2500ms, 80ms ; b type 3000ms, 280ms at 95% load 440vac / 347vac at full load 440vac / 347vac 30ms at full load 440vac / 347vac 180 ~ 480vac 254vdc ~ 679vdc 47 ~ 63hz pf 0.98/230vac, pf 0.98/277vac, pf 0.97/347vac, pf 0.94/440va c (pf 0.93/440vac only for 15v model) at full load (please refer to "power factor characteristic" curve) 0.32a / 347vac 0.26a / 440vac cold start 50a / 440vac <0.75ma / 440vac 95 ~ 108% -40 ~ +70 (refer to "derating curve") 20 ~ 95% rh non-condensing -40 ~ +80 , 10 ~ 95% rh 0.03%/ (0 ~ 50 ) 10 ~ 500hz, 5g 12min./1cycle, period for 72min. each along x, y, z axes 174.9khrs min. mil-hdbk-217f (25 ) 236*68*38.8mm (l*w*h) 100w single output switching power supply features : h v g - 1 0 0 s e r i e s ripple & noise (max.) note.2 voltage tolerance note.3 environment safety & emc protection 100 10 (rth2) protection type : shut down o/p voltage, recovers automatically afte r temperature goes down short circuit 18 ~ 21v 28 ~ 34v 23 ~ 27v 34 ~ 38v 41 ~ 46v 54 ~ 60v 47 ~ 53v 59 ~ 65v 89% 91% 91% 91% 90.5% 91% 2.0% 1.0% 1.0% 1.0% 1.0% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 1.5% 0.5% 0.5% 0.5% 0.5% 0.5% 1.0% 0.5% 0.5% 1.0% 0.5% 0.5% 15v HVG-100-15 hvg-100-20 hvg-100-24 hvg-100-30 hvg-100-36 hvg-100-42 hvg-100-48 hvg-100-54 24v 30v 48v 150mvp-p 150mvp-p 13.5 ~ 17v 17 ~ 22v 150mvp-p 22 ~ 27v 200mvp-p 27 ~ 33v 200mvp-p 33 ~ 40v 200mvp-p 43 ~ 53v 54v 200mvp-p 49 ~ 58v 42v 200mvp-p 38 ~ 46v a : ip65 rated. output voltage and constant current level can be adjusted thr ough internal potentiometer. b : ip67 rated. constant current level adjustable through output cable w ith 0~10vdc or 10v pwm signal or resistance. d (option) : ip67 rated. timer dimming function, contact mean well for deta ils. 1. all parameters not specially mentioned are measured at 347vac input, r ated load and 25 of ambient temperature. 2. ripple & noise are measured at 20mhz of bandwidth by using a 12" twisted pair- wire terminated with a 0.1uf & 47uf parallel capacitor. 3. tolerance : includes set up tolerance, line regulation and load regula tion. 4. derating may be needed under low input voltages. please check the static c haracteristics for more details. 5. type a only. 6. safety and emc design refer to en60598-1, cns15233, gb7000.1. 7. the power supply is considered as a component that will be operated in combi nation with final equipment. since emc performance will be affected by th e complete installation, the final equipment manufacturers must re -qualify emc directive on the complete installation again. 8. refer to warranty statement. protection type : constant current limiting, recovers automatical ly after fault condition is removed constant current limiting, recovers automatically after fault con dition is removed protection type : shut down o/p voltage with auto-recovery or re-power o n to recovery 2.75 ~ 5a 2.64 ~ 4.8a 2.2 ~ 4a 1.76 ~ 3.2a 1.45 ~ 2.65a 1.1 ~ 2a 0.97 ~ 1.77a 1.25 ~ 2.28a 5a 3.2a 2.65a 2a 75w 96w 96w 95.4w 96w 1.77a 95.58w 2.28a 95.76w 1.18kg ; 12pcs/15.2kg/0.74cuft wide input range 180~480vacbuilt-in active pfc function protections: short circuit / over current / over voltage / over temperature cooling by free air convection ocp point adjustable through output cable or internal potentiometer ip67 / ip65 design for indoor or outdoor installations class 2 power unit three in one dimming function (0~10vdc or 10v pwm signal or resistance) suitable for led lighting and street lighting applications compliance to worldwide safety regulations for lighting 5 years warranty (note.8) suitable for dry / damp / wet locations high efficiency up to 91% i/p-o/p:3.75kvac i/p-fg:1.88kvac o/p-fg:0.5kvac ul8750, csa c22.2 no. 250.0-08(except for 42v,48v, 54v), ip65 or ip67 ap proved i/p-o/p, i/p-fg, o/p-fg:100m ohms / 500vdc / 25 / 70% rh withstand voltage isolation resistance HVG-100-15 a 90% 90.5% 20v 36v 4.8a 4a 96w compliance to en55015, en61000-3-2 class c ( 50% load, 60% load only for 1 5v model ) ; en61000-3-3, fcc part 15 class b compliance to en61000-4-2,3,4,5,6,8,11, en61547 , light industry level (surge 4kv), criteria a emc immunity emc emission ip65 ip67 ( for 42v,48v,54v only) ( except for 42v,48v,54v ) file name:hvg-100-spec 2012-03-20
mechanical specification case no.994 unit:mm 300 20 fg (green/yellow) svt 18awg 2c stw 18awg 3c 236 236 236 212 212 212 ac/l(brown) ac/n(blue) 12 9.6 9.4 9.4 34.2 68 4.2 4pl 300 20 +v(red) +v(red) -v(black) -v(black) ip65 rated. output voltage and constant current level can be adjusted thr ough internal (can access by removing the rubber stopper on the case.) potentiometer. 38.8 vo adj. io adj. a type:(hvg-100-_a) 104.4 104.4 104.4 t case t case t case 34 34 34 t case: max. case temperature. t case: max. case temperature. t case: max. case temperature. ip67 rated. timer dimming function, contact mean well for details. 300 20 fg (green/yellow) svt 18awg 2c 38.8 stw 18awg 3c ac/l(brown) ac/n(blue) 12 9.6 9.4 9.4 34.2 68 4.2 4pl 300 20 d type(option):(hvg-100-_d) 100w single output switching power supply h v g - 1 0 0 s e r i e s file name:hvg-100-spec 2012-03-20 b type:(hvg-100-_b) 300 20 38.8 stw 18awg 3c 12 9.6 9.4 9.4 34.2 68 4.2 4pl 300 20 +v(red) dim+(blue) -v(black) dim-(white) fg (green/yellow) ac/l(brown) ac/n(blue) ul2517 18awg 2c svt 18awg 2c
0.80 0.82 0.84 0.86 0.88 0.90 0.92 0.94 0.96 0.98 1.00 50% 60% 70% 80% 90% 100% 440v 347v 277v 230v derating curve static characteristics input voltage (v) 60hz 180 347 440 480 100 90 80 70 60 50 40 load (%) dim+ (b type) dim- fosc : 80khz detection pwm & pfc circuit o.l.p. emi filter rectifiers power switching filter & rectifiers +v -v i/p fg control o.v.p. & o.l.p. pfc circuit pfc control block diagram ambient temperature ( ) load (%) -40 -25 -10 0 15 30 50 60 70 20 40 60 80 100 (horizontal) power factor characteristic load constant current mode (100w) pf o.t.p. 100w single output switching power supply h v g - 1 0 0 s e r i e s file name:hvg-100-spec 2012-03-20
0.60 0.64 0.68 0.72 0.76 0.80 0.84 0.88 0.92 0.96 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 440v 347v 277v 230v efficiency vs load (48v model) hvg-100 series possess superior working efficiency that up to 91% can be re ached in field applications. load efficiency (%) there are two major kinds of led drive method "direct drive" and "with led driv er". a typical led power supply may either work in "constant voltage mode (cv) or c onstant current mode (cc)" to drive the leds. mean well's led power supply with cv+ cc characteristic can b e operated at both cv mode (with led driver, at area (a) and cc m ode (direct drive, at area (b). driving methods of led module typical led power supply i-v curve vo(%) 100 50 50 100 (max.) io (%) constant voltage area constant current area (a) (b) 100w single output switching power supply h v g - 1 0 0 s e r i e s file name:hvg-100-spec 2012-03-20
hvg-100 dimming operation +v(red) dim+(blue) -v(black) dim-(white) fg (green/yellow) ac/l(brown) ac/n(blue) reference resistance value for output current adjustment (typical ) built-in 3 in 1 dimming function, ip67 rated. output constant current lev el can be adjusted through output cable by connecting a resistance or 0 ~ 10vdc or 10v pwm signal between dim+ and dim-. please do not connect "dim-" to "-v". 60k 60% 60% 10k 10k /n 20k /n 30k /n 40k /n 50k /n 60k /n 70k /n 80k /n 90k /n 100k /n single driver multiple drivers (n=driver quantity for synchronized dimming operation) 1v 0v 4v 7v 2v 5v 8v 3v 6v 9v 10v 10% 10% 0% 20k 20% 20% 30k 30% 30% 40k 40% 40% 50k 50% 50% 70k 70% 70% 80k 80% 80% 90k 100k open open open 90% 90% 100% 100% resistance value dimming value percentage of rated current percentage of rated current 0 ~ 10v dimming function for output current adjustment (typical) 60% 60% 10% 10% 20% 20% 30% 30% 40% 40% 50% 50% 70% 70% 80% 80% 90% 90% 100% 100% duty value percentage of rated current 102%~108% ----- 102%~108% 102%~108% 10v pwm signal for output current adjustment (typical): frequency ra nge :100hz ~ 3khz waterproof connector waterproof connector can be assembled on the output cable of hvg-100 to ope rate in dry/wet/damp or outdoor environment. hvg-100 i/p o/p led lamp ac source pin configuration (female) pin configuration (female) size size m12 m15 4-pin 5a/pin m12-04 order no. order no. 10a max. suitable current suitable current 5-pin 5a/pin m12-05 10a max. 2-pin 12a/pin m15-02 12a max. waterproof connection 100w single output switching power supply h v g - 1 0 0 s e r i e s file name:hvg-100-spec 2012-03-20
cable joiner up to four wires can be connected through this cable joiner bysoldering or clamping by tools. 66 26 20 25 cj04-2 suitable for 18awg~22awg cj04-1 suitable for 14awg~16awg o/p wires led lamp hvg-100 cj04 cable joiner can be purchased independently for user's own assembl y. mean well order no. : cj04-1, cj04-2. junction box(option ) 100w single output switching power supply h v g - 1 0 0 s e r i e s file name:hvg-100-spec 2012-03-20 optional junction box available for , please contact meaw well for deta ils. a / blank - type 150 20 3- pf 1/2" 86 76 5 10 38.8 35 2- 5 61 32 8.5 8.5 6 208.8 370.8 150 20 3- pf 1/2" 68 svt 18awg 2c stw 18awg 3c fg (green/yellow) ac/l(brown) ac/n(blue) -v(black) +v(red)
|
