mmd monitor/quartztek 30400 esperanza, rancho santa margarita, ca, 92688 phone: (949) 709-5075, fax: (949) 709-3536, www.mmdcomp.com sales@mmdcomp.com 05/03/11 c subject to change without notice pg 1 of 2 revision: m m q q a a c c & & m m q q a a t t s s e e r r i i e e s s ?? same day shipping available ?? full-size (14pin dip) ?? cmos/ttl output ?? wide frequency range shock mil-std-883, method 2002 cond b solderability mil-std-883, method 2003 solvent resistance mil-std-202, method 215 vibration mil-std-883, method 2007, cond a gross leak test mil-std-883, method 1014, cond c environmental & mechanical detail marking detail line 1 = mxxxxx m = mmd xxxxx = frequency in mhz line 2 = syywwl s = internal code yyww = 4 numerical digit date code (year / week) l = denotes rohs compliant line 3 = xxxxx internal use only may vary with lots pin 1 designator frequency 1.000mhz to 150.000mhz frequency stability (inclusive of temperature, load & voltage) see part number guide aging @ +25 c 5 ppm per year max operating temperature range see part number guide storage temperature range -55 c to +125 c output waveform ttl cmos supply voltage (vdd) +3.3 vdc 10% +5.0 vdc 10% +3.3 vdc 10% +5.0 vdc 10% supply current (unloaded) 25ma 45ma 25ma 45ma load 5ttl or 30pf 10 ttl or 50pf 15pf 30pf logic ?0? 0.4v max 0.4v max logic ?1? 2.4 v min vdd-0.4v min rise/fall time 4nsec max start up time 10msec max duty cycle 1.000mhz to 66.000mhz 45%/55% (ttl @ 1.4v level / cmos @ 50% waveform) 66.000mhz and above 40%/60% (ttl @ 1.4v level / cmos @ 50% waveform) jitter 1.000mhz to 33.000mhz 50psec max (rms) 50psec max (rms) 33.000mhz and above 30psec max (rms) 40psec max (rms) tri-state operation voh = 70% of vdd min or no connection to enable output vol = 30% of vdd max or grounded to disable output (high impedance)
mmd monitor/quartztek 30400 esperanza, rancho santa margarita, ca, 92688 phone: (949) 709-5075, fax: (949) 709-3536, www.mmdcomp.com sales@mmdcomp.com 05/03/11 c subject to change without notice pg 2 of 2 revision: part number guide mechanical details tape & reel dimensions pitch pitch 12.00 [.471] tape width 24.00 [.945] direction of feed 330 [13.0] reel dia notes: unless otherwise specified 1. applicable standards / specifications ansi y14.5m , dimensions and tolerances eia-481-b , 8 mm through 200mm embossed carrier taping and 8 mm and 12 mm punched carrier taping of surface mount components for automatic handling. 2. dimensions are in millimeters [inch]. 3. tolerances are 0.1 [.004] mm unless otherwise specified. 4. do not scale drawing. reel dia q1 q2 q3 q4 q1 q2 q4 q3 pin 1 orient. q1 tape width notes: unless otherwise specified 1. applicable standards / specifications ansi y14.5m , dimensions and tolerances eia-481-b , 8 mm through 200mm embossed carrier taping and 8 mm and 12 mm punched carrier taping of surface mount components for automatic handling. 2. dimensions are in millimeters [inch]. 3. tolerances are 0.1 [.004] mm unless otherwise specified. 4. do not scale drawing. 5.08 [.200] 15.24 [.600] 7.62 [.300] pin 1 pin 7 pin 8 pin 14 tri-state ground output supply voltage pin connections dimensions in bracket are in inches external bypass capacitor recommended 20.70 [.815] max 5.08 [.200] min .50 [.020] 13.10 [.516] max mxxxxx syywwl xxxxx 20.70 [.815] c = cmos t = ttl output 020 = 20 ppm 025 = 25 ppm 050 = 50 ppm 100 = 100 ppm frequency stability supply voltage 5 = +5 vdc 3 = +3.3 vdc blank = no added options g1 = gull-wing (option 1) g = gull-wing (option 2) clxxx = cut leads xxx = lead length code value added options pin 1 connection h = tri-state blank = 0c to +70c 27 = -20c to +70c 48 = -40c to +85c operating temperature mqa frequency please consult with mmd sales department for any other parameters or options full-size (14 pin dip) h
|
