multi-color general-purpose or audible indicators for the latest technical information about this product, including specifications, dimensions, and wiring, see www.bannerengineering.com . the ez-light ? tl50 beacon tower light is a cross between the tl50 tower light and the k50 beacon. this compact design is extremely intense and can even be used in outdoor applications. ? rugged, cost-effective, and easy-to-install multi-segment indicators ? illuminated segments provide easy-to-see operator guidance and indication of equipment status ? displays up to 4 colors ? optional audible function with variable intensity ? available in black or light gray housing ? audible models available with standard or sealed audible element ? immune to ambient light, emi, and rfi interference ? 12 to 30v dc or 24v ac operation ? no assembly required ? consult model key about flashing and rotating options (see figure 1. tl50bl tower lights model key on page 2) multi-color general-purpose models note: more models are listed on the next page. model* # of led colors led function ? connection** inputs tl50blrq 1 red 4-pin euro integral qd connector bimodal (npn or pnp) TL50BLGRQ 2 green, red tl50blgyrq 3 green, yellow, red tl50blbgyrq 4 blue, green, yellow, red 5-pin euro integral qd connector ? the first color listed is the bottom color, going up in successive order. contact factory for other colors and color combinations. * models with black housing are listed. for gray housing, add suffix c at the end of model number (cabled models) or before the q (qd models), e.g., tl50blgyrc or tl50blgyrcq . ** integral qd models only are listed; mating cordset required (see quick-disconnect (qd) cordsets on page 8): ? for 150 mm pvc pigtail with qd, replace q with qp in model number (e.g., tl50blgyrqp ). ? for 2 m (6.5') cable, omit suffix q from model number (e.g., tl50blgyr ). warning: not to be used for personnel protection never use this product as a sensing device for personnel protection. doing so could lead to seri- ous injury or death. this product does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. a sensor failure or malfunction can cause either an ener- gized or de-energized sensor output condition. ez-light ? tl50 beacon tower light p/n 159857 rev. b 12/22/2011 0 159857 5 www.datasheet.co.kr datasheet pdf - http://www..net/
8 figure 1. tl50bl tower lights model key multi-color audible models model* # of led colors led function ? connection** inputs standard audible sealed audible tl50blraq tl50blralsq 1 red 4-pin euro integral qd con- nector bimodal (npn or pnp) tl50blgraq tl50blgralsq 2 green, red tl50blgyraq tl50blgyralsq 3 green, yellow, red 5-pin euro integral qd con- nector tl50blbgyraq tl50blbgyralsq 4 blue, green, yellow, red 8-pin euro integral qd con- nector ? the first color listed is the bottom color, going up in successive order. contact factory for other colors and color combinations. * models with black housing are listed. for gray housing, add suffix c at the end of model number (cabled models) or before the q (qd models), e.g., tl50blgyrc or tl50blgyrcq . ** integral qd models only are listed; mating cordset required (see quick-disconnect (qd) cordsets on page 8): ? for 150 mm pvc pigtail with qd, replace q with qp in model number (e.g., tl50blgyrqp ). ? for 2 m (6.5') cable, omit suffix q from model number (e.g., tl50blgyr ). ez-light ? tl50 beacon tower light 2 www.bannerengineering.com - tel: 763-544-3164 p/n 159857 rev. b www.datasheet.co.kr datasheet pdf - http://www..net/
specifications supply voltage and current 12 to 30v dc (10% max. ripple); or 21 to 27v ac indicators max. current per led color: @ 12v dc: 125 ma @ 30v dc: 60 ma @ 21v ac : 80 ma @ 27v ac: 70 ma standard audible alarm: 25 ma max. current sealed audible alarm: 35 ma max. current indicators 1-4 colors depending on model; green, red, yellow, blue leds are independently selected supply protection circuitry: protected against reverse polarity and transient voltag- es input response time indicator on/off: 1 ms (max.) connections integral 4-pin, 5-pin or 8-pin m12/euro-style qd, 150 mm pvc pigtail with qd, or 2 m (6.5') integral cable, depending on model operating conditions: general-purpose: ?40 to +50 c (?40 to +122 f) standard and sealed audible: ?20 to +50 c (?4 to +122 f) max. rel. humidity: 95% @ 50o c (non-condensing) vibration and mechanical shock: all models meet mil. std. 202f requirements method 201a (vibration: 10 to 60 hz max., double amplitude 0.06", maximum acceleration 10g). also meets iec 947-5-2; 30g 11 ms duration, half sine wave. construction: bases and covers: abs light segment: polycarbonate audible adjustment standard audible alarm: unscrew the cover (up to 1.5 turns max.) to adjust the audible intensity. (do not exceed 1.5 turns or the cover may detach during oper- ation.) for max. intensity, rotate the center plug 180 counterclockwise to remove it. sealed audible alarm: rotate the front cover until the desired intensity is reached. audible alarm audible measurements are made in the direction sound exits the device. for standard audible models, this is the top of the unit (when mounted vertically, sound is directed toward the ceiling). for sealed audible models, sound exits the vented openings in the side of the unit, which should be oriented so that the sound is directed toward the machine operator(s). in environments with high ambient noise levels or high ceilings that absorb sound, the sealed version is recommended. standard audible alarm: 2.7 khz 500 hz oscilla- tion frequency; max. intensity 92 db @ 1 meter (typical) sealed audible alarm: 2.9 khz 250 hz oscillation frequency; max. intensity 94 db @ 1 meter (typical) environmental rating general-purpose and sealed audible: iec ip67 standard audible: iec ip50 certifications pending ez-light ? tl50 beacon tower light p/n 159857 rev. b www.bannerengineering.com - tel: 763-544-3164 3 www.datasheet.co.kr datasheet pdf - http://www..net/
dimensions # of colors tower height (h) general-purpose models standard audible models? sealed audible models 1 46.2 mm (1.8") 77.1 mm (3.1") 100.2 mm (4.0") 2 72.0 mm (2.8") 102.9 mm (4.1") 126.0 mm (5.0") 3 97.8 mm (3.8") 128.7 mm (5.1") 151.8 mm (6.0") 4 123.6 mm (4.8") 154.5 mm (6.1") 177.6 mm (7.0") ? tower height (h) with top unscrewed approximately 3.5 mm to allow sound to escape ez-light ? tl50 beacon tower light 4 www.bannerengineering.com - tel: 763-544-3164 p/n 159857 rev. b www.datasheet.co.kr datasheet pdf - http://www..net/
hookups C 4-pin models sourcing (pnp) input sinking (npn) input key : indicator color 3 4 1 2 c2/a c3/a c1 18-30v dc 21-27v ac indicator color 3 4 1 2 c1 c2/a c3/a 18-30v dc 21-27v ac 1 = brown 2 = white 3 = blue 4 = black c1 = color 1 c2 = color 2 c3 = color 3 a = audible pins 1 and 2 could activate the corresponding color or the audible function, if available. hookups C 5-pin models sourcing (pnp) input sinking (npn) input key : indicator color c2 c3 c1 c4/a 3 4 1 2 5 18-30v dc 21-27v ac indicator color c2 c3 c1 c4/a 3 4 1 2 5 18-30v dc 21-27v ac 1 = brown 2 = white 3 = blue 4 = black 5 = gray c1 = color 1 c2 = color 2 c3 = color 3 c4 = color 4 a = audible pin 5 could activate the corresponding color or the audible function, if available. hookups C 8-pin models sourcing (pnp) input sinking (npn) input key: 7 6 2 1 5 4 8 3 18-30v dc 21-27v ac indicator color c1 c2 c3 c4 a 7 6 2 1 5 4 8 3 indicator color c1 c2 c3 c4 a 18-30v dc 21-27v ac 1 = white 2 = brown 3 = green 4 = yellow 5 = gray 6 = pink 7 = blue 8 = red c1 = color 1 c2 = color 2 c3 = color 3 c4 = color 4 a = audible pin 4 could activate the corresponding color or the audible function, if available. pins 3 and 8 are not used. ez-light ? tl50 beacon tower light p/n 159857 rev. b www.bannerengineering.com - tel: 763-544-3164 5 www.datasheet.co.kr datasheet pdf - http://www..net/
accessories mounting brackets all measurements in mm smb30a ? right-angle bracket with curved slot for versatile ori- entation ? clearance for m6 (?") hard- ware ? 30 mm mounting hole ? 12-ga. stainless steel smb30sc ? swivel bracket with 30 mm mounting hole ? black reinforced thermoplas- tic polyester ? stainless steel mounting and swivel locking hardware in- cluded hole center spacing: a=? 50.8 hole size: a=? 7.0, b=? 30.0 smb30fa ? swivel bracket with tilt and pan movement for precise ad- justment ? 30 mm mounting hole ? 12-ga. 304 stainless steel ? easy sensor mounting to ex- trude rail t-slot smb30mm ? 12-ga. stainless steel bracket with curved mounting slots for versatile orientation ? clearance for m6 (?") hardware ? 30 mm mounting hole smb30sk ? flat-mount swivel bracket with extended range of motion ? black reinforced thermoplastic polyester and 316 stainless steel ? stainless steel swivel locking hardware included ez-light ? tl50 beacon tower light 6 www.bannerengineering.com - tel: 763-544-3164 p/n 159857 rev. b www.datasheet.co.kr datasheet pdf - http://www..net/
lmb sealed right-angle bracket model description construction lmb30ra direct-mount models: bracket kit with base, 30 mm adapter, set screw, fasten- ers, o-rings and gaskets black polycarbonate lmb30rac gray polycarbonate lmbe12ra pipe-mount models: bracket kit with base, ?-14 pipe adapter, set screw, fas- teners, o-rings and gaskets. for use with stand-off pipe (listed and sold separately) black polycarbonate lmbe12rac gray polycarbonate elevated mount system model features components sa-m30te12 - black acetal ? streamlined black acetal or white uhmw stand-off pipe adapter/cover ? connects between 30 mm light base and ?" npsm/dn15 pipe ? mounting hardware included sa-m30te12c - white uhmw polished 304 stainless steel black anodized aluminum clear anodized aluminum ? elevated-use stand-off pipe (?" npsm/ dn15) ? polished 304 stainless steel, black ano- dized aluminum, or clear anodized alumi- num surface ? ? npt thread at both ends ? compatible with most industrial environ- ments sop-e12-150ss 150 mm (6") long sop-e12-150a 150 mm (6") long sop-e12-150ac 150 mm (6") long sop-e12-300ss 300 mm (12") long sop-e12-300a 300 mm (12") long sop-e12-300ac 300 mm (12") long sop-e12-900ss 900 mm (36") long sop-e12-900a 900 mm (36") long sop-e12-900ac 900 mm (36") long sa-e12m30 - black acetal ? streamlined black acetal or white uhmw mounting base adapter/cover ? connects between ?" npsm/dn15 pipe and 30 mm (1-3/16") drilled hole ? mounting hardware included sa-e12m30c - white uhmw ez-light ? tl50 beacon tower light p/n 159857 rev. b www.bannerengineering.com - tel: 763-544-3164 7 www.datasheet.co.kr datasheet pdf - http://www..net/
quick-disconnect (qd) cordsets 4-pin m12/euro-style cordsets (straight connector) mqdc-406, 2 m (6.5') mqdc-415, 5 m (15') mqdc-430, 9 m (30') 5-pin m12/euro-style cordsets (straight connector) mqdc1-506, 2 m (6') mqdc1-515, 5 m (15') mqdc1-530, 9 m (30') 5-pin m12/euro-style cordsets (right-angle connector) mqdc1-506ra, 2 m (6') mqdc1-515ra, 5 m (15') mqdc1-530ra, 9 m (30') 8-pin m12/euro-style cordsets with open-shield (straight connector) mqdc-806, 2 m (6.5') mqdc-815, 5 m (15') mqdc-830, 9 m (30') banner engineering corp limited warranty banner engineering corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. banner engineering corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. this warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the banner product. this limited warranty is exclusive and in lieu of all other warranties whether express or implied (in- cluding, without limitation, any warranty of merchantability or fitness for a particular purpose), and whether arising under course of performance, course of dealing or trade usage. this warranty is exclusive and limited to repair or, at the discretion of banner engineering corp., replacement. in no event shall banner engineering corp. be liable to buyer or any other person or entity for any extra costs, expen- ses, losses, loss of profits, or any incidental, consequential or special damages resulting from any product defect or from the use or inability to use the product, whether arising in contract or war- ranty, statute, tort, strict liability, negligence, or otherwise. banner engineering corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by banner engineering corp. ez-light ? tl50 beacon tower light www.datasheet.co.kr datasheet pdf - http://www..net/
|
