View SM5009AN6S_8245351.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

sm5009 series nippon precision circuits inc.? crystal oscillator module ics overview the sm5009 series are crystal oscillator module ics that incorporate low crystal current type oscillating circuit to limit oscillator-stage current, so that they can reduce crystal current lower than the existing products. since the oscillating circuit has oscillator capacitors with excellent frequency response and feedback resistor built-in, just connecting crystal realizes stable fundamental oscillation responding up to 40mhz. the sm5009 series are ideal for smd type crystal oscillator using a strip-shaped crystal blank. features low crystal current oscillator up to 40mhz operating frequency range (funda- mental oscillation) operating supply voltage range 3v operation: 2.7 to 3.6v 5v operation: 4.5 to 5.5v ?0 to 85 c operating temperature range oscillation capacitors c g , c d built-in inverter ampli?r feedback resistor built-in standby function oscillator stops (al series), high impedance in standby mode low standby current power-save pull-up resistor built-in (al series) frequency divider built-in (f o , f o /2, f o /4, f o /8, f o /16, f o /32 determined by internal connection) output drive capability ?l , an , ak , cn : 16ma (v dd = 4.5v) ?h : 4ma (v dd = 4.5v) output load: c l = 50pf max. output duty level cmos level (1/2 vdd): al , an , ah , cn ttl level (1.4v): ak molybdenum-gate cmos process 8-pin sop (sm5009 s) chip form (cf5009 ) series configuration applications smd type crystal oscillator module ordering information version 1 1. package devices (8-pin sop) have designation sm5009 s. 3v operation 5v operation output duty level output frequency inh input level standby mode recommended operating frequency range 2 [mhz] 2. the recommended operating frequency is a yardstick value derived from the crystal used for npc characteristics authenticatio n. however, the oscil- lator frequency band is not guaranteed. speci?ally, the characteristics can vary greatly due to crystal characteristics and mo unting conditions, so the oscillation characteristics of components must be carefully evaluated. output load 3 (max) [pf] 3. output load value is the maximum load capacitance that allows drive. recommended operating frequency range 2 [mhz] output load 3 (max) [pf] oscillator stop function output state cf5009al1 up to 40 50 up to 40 50 cmos f o cmos yes hi-z cf5009al2 f o /2 cf5009al3 f o /4 cf5009al4 f o /8 cf5009al5 f o /16 cf5009al6 f o /32 cf5009an1 up to 40 30 up to 40 50 cmos f o ttl no hi-z cf5009an2 f o /2 cf5009an3 cmos/ttl f o /4 cf5009an4 f o /8 cf5009an5 f o /16 cf5009an6 f o /32 cf5009cn1 up to 30 15 up to 30 50 cmos f o ttl no hi-z cf5009cn2 f o /2 cf5009ak1 up to 40 15 ttl f o ttl no hi-z cf5009ak2 f o /2 cf5009ah1 up to 16 15 up to 30 15 cmos f o ttl no hi-z cf5009ah2 f o /2 cf5009ah3 f o /4 cf5009ah4 f o /8 device package sm5009 s 8-pin sop cf5009 ? chip form
sm5009 series nippon precision circuits inc.? pad layout (unit: m) pinout (top view) pin description and pad dimensions chip size: 0.92 1.22 mm chip thickness: 300 ?30 ? chip base: v dd level q vdd xt vss (0,0) (920,1220) x y ha5009 inh xt 1 xt vss q vdd 4 2 3 nc nc 8 7 6 5 xt inh number name i/o description pad dimensions [m] xy 1inh i output state control input. standby mode when low, pull-up resistor built-in. in the case of the cf5009al , the oscillator stops and power-save pull-up resistor built in to reduce current consumption at standby mode. 195 212 2 xt i ampli?r input. crystal oscillator connection pins. crystal oscillator connected between xt and xt 385 212 3xt o ampli?r output. 575 212 4 vss ground 766 212 5qo output. output frequency (f o , f o /2, f o /4, f o /8, f o /16, f o /32) determined by internal connection 765 1062 6 nc no connection 7 nc no connection 8 vdd supply voltage 162 1062
sm5009 series nippon precision circuits inc.? package dimensions (unit: mm) ? 8-pin sop block diagram notes. the sm5009 series reduce crystal current by limiting driving current of oscillating-stage inverter and inhibiting oscilla ting amplitude. depending on the characteristics of using crystal or the mounting condition, they may not oscillate normally. please evaluate the oscillatio n start-up characteris- tics adequately with your actual device. 4.4 0.2 1.5 0.1 0.05 0.05 0.4 0.2 5.2 0.3 0.4 0.1 0.15 + 0.1 ? 0.05 0 to 10 6.2 0.3 0.695typ 1.27 0.12 m 0.10 xt vss vdd q c gp c dp r f xt inh 1/2 1/2 1/2 1/2 1/2 c gn c dn
sm5009 series nippon precision circuits inc.? functional description standby function 5009 al series when inh goes low, the oscillator stops and the oscillator output on q becomes high impedance. 5009ah , ak , an , cn series when inh goes low, the output on q becomes high impedance, but internally the oscillator does not stop. power-save pull-up resistance (al series only) the inh pull-up resistance changes in response to the input level (high or low). when inh goes low (standby state), the pull-up resistance becomes large to reduce the current consumption during standby. current consumption and output waveform with npcs standard crystal version inh q oscillator al series high (or open) any f o , f o /2, f o /4, f o /8, f o /16 or f o /32 output frequency normal operation low high impedance stopped ah , ak , an , cn series high (or open) any f o , f o /2, f o /4, f o /8, f o /16 or f o /32 output frequency normal operation low high impedance normal operation f [mhz] r [ ? ] l [mh] ca [ff] cb [pf] 30 17.2 4.36 6.46 2.26 40 16.8 2.90 5.47 2.08 l ca r cb
sm5009 series nippon precision circuits inc.? specifications absolute maximum ratings v ss = 0v unless otherwise noted. recommended operating conditions v ss = 0v unless otherwise noted. parameter symbol condition rating unit supply voltage range v dd ? 0.5 to +7.0 v input voltage range v in ? 0.5 to v dd + 0.5 v output voltage range v out ? 0.5 to v dd + 0.5 v operating temperature range t opr ? 40 to +85 c storage temperature range t stg chip form ? 65 to +150 c 8-pin sop ? 55 to +125 output current i out 25 ma power dissipation p d 8-pin sop 500 mw parameter symbol version condition rating unit min typ max supply voltage v dd ah f 30mhz 4.5 5.5 v f 16mhz 2.7 3.3 ak f 40mhz 4.5 5.5 v an f 40mhz 2.7 5.5 v cn f 30mhz 2.7 5.5 v al chip form f 40mhz 2.7 5.5 v f 30mhz 2.3 2.7 f 20mhz 2.25 2.75 8-pin sop f 40mhz 2.7 5.5 f 14.4mhz 2.4 2.7 input voltage v in all version v ss ? dd v operating temperature t opr ah f 30mhz, 4.5v v dd 5.5v ? 40 + 85 c f 16mhz, 2.7v v dd 3.6v ? 20 + 80 ak f 30mhz ? 40 + 85 c 30mhz < f 40mhz ? 20 + 80 an chip form f 40mhz, 2.7v v dd < 4.5v ? 20 + 80 c f 40mhz, 4.5v v dd 5.5v ? 40 + 85 8-pin sop f 40mhz, 2.7v v dd < 4.5v ? 20 + 80 f 40mhz, 4.5v v dd 5.5v ? 20 + 80 f 30mhz, 4.5v v dd 5.5v ? 40 + 85 cn f 30mhz, 2.7v v dd < 4.5v ? 10 + 70 c f 30mhz, 4.5v v dd 5.5v ? 40 + 85 al chip form f 40mhz, 2.7v v dd 5.5v ? 40 + 85 c f 30mhz, 2.3v v dd 2.7v ? 20 + 80 f 20mhz, 2.25v v dd 2.75v ? 20 + 80 8-pin sop f 40mhz, 2.7v v dd 5.5v ? 20 + 80 f 30mhz, 2.7v v dd 5.5v ? 40 + 85 f 14.4mhz, 2.4v v dd 2.7v ? 20 + 80
sm5009 series nippon precision circuits inc.? electrical characteristics 5009al series 3v operation: v dd = 2.7 to 3.3v, v ss = 0v, ta = ? 40 to 85 c unless otherwise noted. parameter symbol condition rating unit min typ max high-level output voltage v oh q: measurement cct 1, i oh = 8ma 2.2 v low-level output voltage v ol q: measurement cct 1, i ol = 8ma 0.4 v high-level input voltage v ih inh 0.7v dd v low-level input voltage v il inh 0.3v dd v output leakage current i z q: measurement cct 2, inh = low, v oh = v dd 10 ? q: measurement cct 2, inh = low, v ol = v ss 10 current consumption i dd inh = open, measurement cct 3, load cct 2, c l = 15pf, 40mhz crystal oscillator cf5009al1 8 17 ma cf5009al2 5 11 cf5009al3 4 9 cf5009al4 3 7 cf5009al5 3 6 cf5009al6 2 5 inh = open, measurement cct 3, load cct 2, c l = 15pf, 40mhz crystal oscillator, ta = ?0 to +80 c sm5009al1s 8 17 sm5009al2s 5 11 sm5009al3s 4 9 sm5009al4s 3 7 sm5009al5s 3 6 sm5009al6s 2 5 standby current i st inh = v ss , measurement cct 3 2 5 ? inh pull-up resistance r up1 measurement cct 4, v dd = 3v, inh = v ss 0.6 12 m ? r up2 measurement cct 4, v dd = 3v, inh = 2.1v 40 200 k ? negative resistance ? r l v dd = 3v, ta = 25 c, 40mhz ?00 ? feedback resistance r f measurement cct 5 0.4 1.1 m ? built-in capacitance c g design value. a monitor pattern on a wafer is tested. 5.58 6 6.42 pf c d 9.3 10 10.7 pf
sm5009 series nippon precision circuits inc.? 5v operation: v dd = 4.5 to 5.5v, v ss = 0v, ta = ? 40 to 85 c unless otherwise noted. parameter symbol condition rating unit min typ max high-level output voltage v oh q: measurement cct 1, i oh = 16ma 4.0 v low-level output voltage v ol q: measurement cct 1, i ol = 16ma 0.4 v high-level input voltage v ih inh 0.7v dd v low-level input voltage v il inh 0.3v dd v output leakage current i z q: measurement cct 2, inh = low, v oh = v dd 10 ? q: measurement cct 2, inh = low, v ol = v ss 10 current consumption i dd inh = open, measurement cct 3, load cct 2, c l = 15pf, 40mhz crystal oscillator cf5009al1 12 26 ma cf5009al2 8 17 cf5009al3 6 13 cf5009al4 5 11 cf5009al5 5 10 cf5009al6 4 9 inh = open, measurement cct 3, load cct 2, c l = 15pf, 40mhz crystal oscillator, ta = ?0 to +80 c sm5009al1s 12 26 sm5009al2s 8 17 sm5009al3s 6 13 sm5009al4s 5 11 sm5009al5s 5 10 sm5009al6s 4 9 standby current i st inh = v ss , measurement cct 3 6 15 a inh pull-up resistance r up1 measurement cct 4, v dd = 5v, inh = v ss 0.3 6 m ? r up2 measurement cct 4, v dd = 5v, inh = 3.5v 40 200 k ? negative resistance ? r l v dd = 5v, ta = 25 c, 40mhz ?00 ? feedback resistance r f measurement cct 5 0.4 1.1 m ? built-in capacitance c g design value. a monitor pattern on a wafer is tested. 5.58 6 6.42 pf c d 9.3 10 10.7 pf
sm5009 series nippon precision circuits inc.? 5009an /cn series 3v operation: v dd = 2.7 to 3.3v, v ss = 0v, ta = ? 20 to 80 c unless otherwise noted. parameter symbol condition rating unit min typ max high-level output voltage v oh q: measurement cct 1, i oh = 8ma sm5009an1s, cf5009an1 sm5009an2s, cf5009an2 2.2 v sm5009an3s, cf5009an3 sm5009an4s, cf5009an4 sm5009an5s, cf5009an5 SM5009AN6S, cf5009an6 sm5009cn1s, cf5009cn1 sm5009cn2s, cf5009cn2 2.1 low-level output voltage v ol q: measurement cct 1, i ol = 8ma 0.4 v high-level input voltage v ih inh 2.0 v low-level input voltage v il inh 0.3 v output leakage current i z q: measurement cct 2, inh = low, v oh = v dd 10 ? q: measurement cct 2, inh = low, v ol = v ss 10 current consumption i dd inh = open, measurement cct 3, load cct 2, c l = 15pf, 40mhz crystal oscillator sm5009an1s, cf5009an1 8 17 ma sm5009an2s, cf5009an2 5 11 sm5009an3s, cf5009an3 4 9 sm5009an4s, cf5009an4 3 7 sm5009an5s, cf5009an5 3 6 SM5009AN6S, cf5009an6 2 5 inh = open, measurement cct 3, load cct 2, c l = 15pf, 30mhz crystal oscillator, ta = ?0 to +70 c sm5009cn1s, cf5009cn1 7 15 sm5009cn2s, cf5009cn2 4 9 inh pull-up resistance r up measurement cct 4, v dd = 3v, inh = v ss 40 200 k ? negative resistance ? r l v dd = 3v, ta = 25 c, 40mhz ?00 ? feedback resistance r f measurement cct 5 0.4 1.1 m ? built-in capacitance c g design value. a monitor pattern on a wafer is tested. 5.58 6 6.42 pf c d 9.3 10 10.7 pf
sm5009 series nippon precision circuits inc.? 5v operation: v dd = 4.5 to 5.5v, v ss = 0v, ta = ? 40 to 85 c unless otherwise noted. parameter symbol condition rating unit min typ max high-level output voltage v oh q: measurement cct 1, i oh = 16ma sm5009an1s, cf5009an1 sm5009an2s, cf5009an2 4.0 v sm5009an3s, cf5009an3 sm5009an4s, cf5009an4 sm5009an5s, cf5009an5 SM5009AN6S, cf5009an6 sm5009cn1s, cf5009cn1 sm5009cn2s, cf5009cn2 3.9 low-level output voltage v ol q: measurement cct 1, i ol = 16ma 0.4 v high-level input voltage v ih inh 2.0 v low-level input voltage v il inh 0.8 v output leakage current i z q: measurement cct 2, inh = low, v oh = v dd 10 ? q: measurement cct 2, inh = low, v ol = v ss 10 current consumption i dd inh = open, measurement cct 3, load cct 2, c l = 15pf, 40mhz crystal oscillator cf5009an1 12 26 ma cf5009an2 8 17 cf5009an3 6 13 cf5009an4 5 11 cf5009an5 5 10 cf5009an6 4 9 inh = open, measurement cct 3, load cct 2, c l = 15pf, 40mhz crystal oscillator, ta = ?0 to +80 c sm5009an1s 12 26 sm5009an2s 8 17 sm5009an3s 6 13 sm5009an4s 5 11 sm5009an5s 5 10 SM5009AN6S 4 9 inh = open, measurement cct 3, load cct 2, c l = 15pf, 30mhz crystal oscillator sm5009cn1s, cf5009cn1 10 22 sm5009cn2s, cf5009cn2 7 15 inh pull-up resistance r up measurement cct 4, v dd = 5v, inh = v ss 40 200 k ? negative resistance ? r l v dd = 5v, ta = 25 c, 40mhz ?10 ? feedback resistance r f measurement cct 5 0.4 1.1 m ? built-in capacitance c g design value. a monitor pattern on a wafer is tested. 5.58 6 6.42 pf c d 9.3 10 10.7 pf
sm5009 series nippon precision circuits inc.?0 5009ak series v dd = 4.5 to 5.5v, v ss = 0v, ta = ? 40 to 85 c unless otherwise noted. parameter symbol condition rating unit min typ max high-level output voltage v oh q: measurement cct 1, i oh = 16ma 4.0 v low-level output voltage v ol q: measurement cct 1, i ol = 16ma 0.4 v high-level input voltage v ih inh 2.0 v low-level input voltage v il inh 0.8 v output leakage current i z q: measurement cct 2, inh = low, v oh = v dd 10 ? q: measurement cct 2, inh = low, v ol = v ss 10 current consumption i dd inh = open, measurement cct 3, load cct 1, c l = 15pf, 40mhz crystal oscillator, ta = ?0 to +80 c sm5009ak1s 12 26 ma cf5009ak1 12 26 sm5009ak2s 8 17 cf5009ak2 8 17 inh pull-up resistance r up measurement cct 4, v dd = 5v, inh = v ss 40 200 k ? negative resistance ? r l v dd = 5v, ta = 25 c, 40mhz ?10 ? feedback resistance r f measurement cct 5 0.4 1.1 m ? built-in capacitance c g design value. a monitor pattern on a wafer is tested. 5.58 6 6.42 pf c d 9.3 10 10.7 pf
sm5009 series nippon precision circuits inc.?1 5009ah series 3v operation: v dd = 2.7 to 3.3v, v ss = 0v, ta = ? 20 to 80 c unless otherwise noted. 5v operation: v dd = 4.5 to 5.5v, v ss = 0v, ta = ? 40 to 85 c unless otherwise noted. parameter symbol condition rating unit min typ max high-level output voltage v oh q: measurement cct 1, i oh = 2ma 2.2 v low-level output voltage v ol q: measurement cct 1, i ol = 2ma 0.4 v high-level input voltage v ih inh 2.0 v low-level input voltage v il inh 0.3 v output leakage current i z q: measurement cct 2, inh = low, v oh = v dd 10 ? q: measurement cct 2, inh = low, v ol = v ss 10 current consumption i dd inh = open, measurement cct 3, load cct 2, c l = 15pf, 16mhz crystal oscillator sm5009ah1s cf5009ah1 4.5 10 ma sm5009ah2s cf5009ah2 ?7 sm5009ah3s cf5009ah3 sm5009ah4s cf5009ah4 1.5 3.5 inh pull-up resistance r up measurement cct 4, v dd = 3v, inh = v ss 40 200 k ? negative resistance ? r l v dd = 3v, ta = 25 c, 16mhz ?50 ? feedback resistance r f measurement cct 5 0.4 1.1 m ? built-in capacitance c g design value. a monitor pattern on a wafer is tested. 5.58 6 6.42 pf c d 9.3 10 10.7 pf parameter symbol condition rating unit min typ max high-level output voltage v oh q: measurement cct 1, i oh = 4ma 4.0 v low-level output voltage v ol q: measurement cct 1, i ol = 4ma 0.4 v high-level input voltage v ih inh 2.0 v low-level input voltage v il inh 0.8 v output leakage current i z q: measurement cct 2, inh = low, v oh = v dd 10 ? q: measurement cct 2, inh = low, v ol = v ss 10 current consumption i dd inh = open, measurement cct 3, load cct 2, c l = 15pf, 30mhz crystal oscillator sm5009ah1s cf5009ah1 ?20 ma sm5009ah2s cf5009ah2 ?13 sm5009ah3s cf5009ah3 sm5009ah4s cf5009ah4 ?9 inh pull-up resistance r up measurement cct 4, v dd = 5v, inh = v ss 40 200 k ? negative resistance ? r l v dd = 5v, ta = 25 c, 30mhz ?40 ? feedback resistance r f measurement cct 5 0.4 1.1 m ? built-in capacitance c g design value. a monitor pattern on a wafer is tested. 5.58 6 6.42 pf c d 9.3 10 10.7 pf
sm5009 series nippon precision circuits inc.?2 switching characteristics 5009al series 3v operation: v dd = 2.7 to 3.3v, v ss = 0v, ta = ? 40 to 85 c unless otherwise noted. parameter symbol condition rating unit min typ max output rise time t r1 measurement cct 3, load cct 2, 0.1v dd to 0.9v dd , c l = 15pf 3.5 9 ns measurement cct 3, load cct 2, 0.1v dd to 0.9v dd , v dd = 2.3 to 2.7v, ta = ?0 to +80 c, c l = 15pf ?13 t r2 measurement cct 3, load cct 2, 0.1v dd to 0.9v dd , c l = 30pf 5 12 measurement cct 3, load cct 2, 0.1v dd to 0.9v dd , v dd = 2.4 to 2.7v, ta = ?0 to +80 c, c l = 30pf 5.5 16 t r3 measurement cct 3, load cct 2, 0.1v dd to 0.9v dd , v dd = 3.0 to 3.6v, f 30mhz, c l = 50pf ?12 measurement cct 3, load cct 2, 0.2v dd to 0.8v dd , v dd = 3.0 to 3.6v, f 40mhz, c l = 50pf 3.5 12 output fall time t f1 measurement cct 3, load cct 2, 0.9v dd to 0.1v dd , c l = 15pf 3.5 9 ns measurement cct 3, load cct 2, 0.9v dd to 0.1v dd , v dd = 2.3 to 2.7v, ta = ?0 to +80 c, c l = 15pf ?13 t f2 measurement cct 3, load cct 2, 0.9v dd to 0.1v dd , c l = 30pf 5 12 measurement cct 3, load cct 2, 0.9v dd to 0.1v dd , v dd = 2.4 to 2.7v, ta = ?0 to +80 c, c l = 30pf 5.5 16 t f3 measurement cct 3, load cct 2, 0.9v dd to 0.1v dd , v dd = 3.0 to 3.6v, f 30mhz, c l = 50pf ?12 measurement cct 3, load cct 2, 0.8v dd to 0.2v dd , v dd = 3.0 to 3.6v, f 40mhz, c l = 50pf 3.5 12 output duty cycle 1 1. the duty cycle characteristic is checked the sample chips of each production lot. duty1 measurement cct 3, load cct 2, v dd = 3v, f 40mhz, ta = 25 c, c l = 30pf 45?5 % measurement cct 3, load cct 2, v dd = 2.4v, f 14.4mhz, ta = 25 c, c l = 30pf 40?0 cf5009al only, measurement cct 3, load cct 2, v dd = 2.5v, f 30mhz, ta = 25 c, c l = 15pf 40?0 duty2 cf5009al only, measurement cct 3, load cct 2, v dd = 3.3v, f 30mhz, ta = 25 c, c l = 50pf 45?5 cf5009al only, measurement cct 3, load cct 2, v dd = 3.3v, f 40mhz, ta = 25 c, c l = 50pf 40?0 output disable delay time 2 2. oscillator stop function is built-in. when inh goes low, normal output stops. when inh goes high, normal output is not resumed until after the oscillator start-up time has elapsed. t plz measurement cct 6, load cct 2, v dd = 3v, ta = 25 c, c l 15pf 100 ns output enable delay time 2 t pzl 100 ns maximum operating frequency f max measurement cct 3 cf5009al 40 mhz sm5009al s30 measurement cct 3, ta = ?0 to +80 c sm5009al s40 measurement cct 3, ta = ?0 to +80 c v dd = 2.4 to 2.7v, sm5009al s 14.4 v dd = 2.3 to 2.7v, cf5009al 30 v dd = 2.25 to 2.75v, cf5009al 20
sm5009 series nippon precision circuits inc.?3 5v operation: v dd = 4.5 to 5.5v, v ss = 0v, ta = ? 40 to 85 c unless otherwise noted. parameter symbol condition rating unit min typ max output rise time t r1 measurement cct 3, load cct 2, 0.1v dd to 0.9v dd c l = 15pf 2 4 ns t r2 c l = 30pf 3.5 7 t r3 c l = 50pf 4 8 output fall time t f1 measurement cct 3, load cct 2, 0.9v dd to 0.1v dd c l = 15pf 2 4 ns t f2 c l = 30pf 3.5 7 t f3 c l = 50pf 4 8 output duty cycle 1 1. the duty cycle characteristic is checked the sample chips of each production lot. duty measurement cct 3, load cct 2, v dd = 5v, ta = 25 c, c l = 50pf 45 55 % output disable delay time 2 2. oscillator stop function is built-in. when inh goes low, normal output stops. when inh goes high, normal output is not resumed until after the oscillator start-up time has elapsed. t plz measurement cct 6, load cct 2, v dd = 5v, ta = 25 c, c l 15pf 100 ns output enable delay time 2 t pzl 100 ns maximum operating frequency f max measurement cct 3 cf5009al 40 mhz sm5009al s30 measurement cct 3, ta = ?0 to +80 c sm5009al s40
sm5009 series nippon precision circuits inc.?4 5009an /cn series 3v operation: v dd = 2.7 to 3.3v, v ss = 0v, ta = ? 20 to 80 c unless otherwise noted. parameter symbol condition rating unit min typ max output rise time t r1 measurement cct 3, load cct 2, 0.1v dd to 0.9v dd ,c l = 15pf sm5009an1s, cf5009an1 sm5009an2s, cf5009an2 3.5 9 ns sm5009an3s, cf5009an3 sm5009an4s, cf5009an4 sm5009an5s, cf5009an5 SM5009AN6S, cf5009an6 sm5009cn1s, cf5009cn1 sm5009cn2s, cf5009cn2 ?13 t r2 measurement cct 3, load cct 2, 0.1v dd to 0.9v dd ,c l = 30pf sm5009an1s, cf5009an1 sm5009an2s, cf5009an2 ?12 sm5009an3s, cf5009an3 sm5009an4s, cf5009an4 sm5009an5s, cf5009an5 SM5009AN6S, cf5009an6 sm5009cn1s, cf5009cn1 sm5009cn2s, cf5009cn2 ?16 output fall time t f1 measurement cct 3, load cct 2, 0.9v dd to 0.1v dd ,c l = 15pf sm5009an1s, cf5009an1 sm5009an2s, cf5009an2 3.5 9 ns sm5009an3s, cf5009an3 sm5009an4s, cf5009an4 sm5009an5s, cf5009an5 SM5009AN6S, cf5009an6 sm5009cn1s, cf5009cn1 sm5009cn2s, cf5009cn2 ?13 t f2 measurement cct 3, load cct 2, 0.9v dd to 0.1v dd ,c l = 30pf sm5009an1s, cf5009an1 sm5009an2s, cf5009an2 ?12 sm5009an3s, cf5009an3 sm5009an4s, cf5009an4 sm5009an5s, cf5009an5 SM5009AN6S, cf5009an6 sm5009cn1s, cf5009cn1 sm5009cn2s, cf5009cn2 ?16 output duty cycle 1 1. the duty cycle characteristic is checked the sample chips of each production lot. duty measurement cct 3, load cct 2, v dd = 3v, ta = 25 c c l = 30 pf, sm5009an s, cf5009an 45?5 % c l = 15 pf, sm5009cn s, cf5009cn 40?0 output disable delay time t plz measurement cct 6, load cct 2, v dd = 3v, ta = 25 c, c l 15pf 100 ns output enable delay time t pzl 100 ns maximum operating frequency f max measurement cct 3 sm5009an s, cf5009an 40 mhz ta = ?0 to +70 c, sm5009cn s, cf5009cn 30
sm5009 series nippon precision circuits inc.?5 5v operation: v dd = 4.5 to 5.5v, v ss = 0v, ta = ? 40 to 85 c unless otherwise noted. 5009ak series v dd = 4.5 to 5.5v, v ss = 0v, ta = ? 40 to 85 c unless otherwise noted. parameter symbol condition rating unit min typ max output rise time t r1 measurement cct 3, load cct 2, 0.1v dd to 0.9v dd c l = 15pf 2 4 ns t r2 c l = 30pf 3.5 7 t r3 c l = 50pf 4 8 output fall time t f1 measurement cct 3, load cct 2, 0.9v dd to 0.1v dd c l = 15pf 2 4 ns t f2 c l = 30pf 3.5 7 t f3 c l = 50pf 4 8 output duty cycle 1 1. the duty cycle characteristic is checked the sample chips of each production lot. duty measurement cct 3, load cct 2, v dd = 5v, ta = 25 c, c l = 50pf 45 55 % output disable delay time t plz measurement cct 6, load cct 2, v dd = 5v, ta = 25 c, c l 15pf 100 ns output enable delay time t pzl 100 ns maximum operating frequency f max measurement cct 3 sm5009an s, cf5009an 40 mhz sm5009cn s, cf5009cn 30 parameter symbol condition rating unit min typ max output rise time t r measurement cct 3, load cct 1, 0.4v to 2.4v, c l = 15pf 2 6 ns output fall time t f measurement cct 3, load cct 1, 2.4v to 0.4v, c l = 15pf 2 6 ns output duty cycle 1 1. the duty cycle characteristic is checked the sample chips of each production lot. duty measurement cct 3, load cct 1, v dd = 5v, ta = 25 c, c l = 15pf 45 55 % output disable delay time t plz measurement cct 6, load cct 1, v dd = 5v, ta = 25 c, c l 15pf 100 ns output enable delay time t pzl 100 ns maximum operating frequency f max measurement cct 3 ta = ?0 to +80 c40 mhz ta = ?0 to +85 c30
sm5009 series nippon precision circuits inc.?6 5009ah series 3v operation: v dd = 2.7 to 3.3v, v ss = 0v, ta = ? 20 to 80 c unless otherwise noted. 5v operation: v dd = 4.5 to 5.5v, v ss = 0v, ta = ? 40 to 85 c unless otherwise noted. parameter symbol condition rating unit min typ max output rise time t r1 measurement cct 3, load cct 2, 0.1v dd to 0.9v dd , c l = 15pf 6 18 ns output fall time t f1 measurement cct 3, load cct 2, 0.9v dd to 0.1v dd , c l = 15pf 6 18 ns output duty cycle 1 1. the duty cycle characteristic is checked the sample chips of each production lot. duty measurement cct 3, load cct 2, v dd = 3v, ta = 25 c, c l = 15pf 45 55 % output disable delay time t plz measurement cct 6, load cct 2, v dd = 3v, ta = 25 c, c l 15pf 100 ns output enable delay time t pzl 100 ns maximum operating frequency f max measurement cct 3 16 mhz parameter symbol condition rating unit min typ max output rise time t r1 measurement cct 3, load cct 2, 0.1v dd to 0.9v dd , c l = 15pf 4 12 ns output fall time t f1 measurement cct 3, load cct 2, 0.9v dd to 0.1v dd , c l = 15pf 4 12 ns output duty cycle 1 1. the duty cycle characteristic is checked the sample chips of each production lot. duty measurement cct 3, load cct 2, v dd = 5v, ta = 25 c, c l = 15pf 45 55 % output disable delay time t plz measurement cct 6, load cct 2, v dd = 5v, ta = 25 c, c l 15pf 100 ns output enable delay time t pzl 100 ns maximum operating frequency f max measurement cct 3 30 mhz
sm5009 series nippon precision circuits inc.?7 measurement circuits measurement cct 1 ? 5009ak , al , an1, an2 r1: 50 ? r2: 250 ? (v dd = 4.5v), 275 ? (v dd = 2.7v) r3: 256 ? (v dd = 4.5v), 288 ? (v dd = 2.7v) ? 5009an3 to an6, cn r1: 50 ? r2: 245 ? (v dd = 4.5v), 262 ? (v dd = 2.7v) r3: 256 ? (v dd = 4.5v), 288 ? (v dd = 2.7v) ? 5009ah r1: 50 ? r2: 1000 ? (v dd = 4.5v), 1100 ? (v dd = 2.7v) r3: 1025 ? (v dd = 4.5v), 1150 ? (v dd = 2.7v) measurement cct 2 measurement cct 3 signal generator vdd vss xt q r1 r2 r3 v dd 0v xt input waveform (10mhz) v oh 0v q output v dd v dd v ol q output 0v when measuring v ol when measuring v oh vdd vss q i z v oh v ol v a i z vdd vss xt q x'tal xt inh i dd i st a measurement cct 4 measurement cct 5 measurement cct 6 r1: 50 ? vdd vss i pr a 3.0v or 5.0v inh v v ih v il v dd i pr (v il = 0v) r up2 = i pr v ih : 2.1v(v dd = 3.0v) v ih : 3.5v(v dd = 5.0v) v dd v ih r up r up1 = vdd vss i rf r f = xt v dd i rf xt a signal generator vss xt q r1 vdd inh
sm5009 series nippon precision circuits inc.?8 load cct 1 load cct 2 switching time measurement waveform output duty level (cmos) output duty level (ttl) output duty cycle (cmos) output duty cycle (ttl) c l = 15pf: duty, i dd , t r , t f r = 400 ? q output (including probe capacitance) r c l c l = 15pf: duty, i dd , t r1 , t f1 c l = 30pf: t r2 , t f2 c l = 50pf: t r3 , t f3 q output (including probe capacitance) c l 0.9v dd 0.1v dd 0.9v dd 0.1v dd t r t f q output duty measurement voltage (0.5v dd ) t w 2.4v 0.4v 2.4v 0.4v t r t f q output duty measurement voltage (1.4v ) t w duty measurement voltage ( 0.5v dd ) q output t w t duty= t w / t 100 (%) duty measurement voltage ( 1.4v ) q output t w t duty= t w / t 100 (%)
sm5009 series nippon precision circuits inc.?9 output enable/disable delay note (al series only): when the device is in standby, the oscillator stops. when standby is released, the oscil- lator starts and stable oscillator output occurs after a short delay. q output inh v ih v il t plz t pzl inh input waveform t r = t f 10ns
sm5009 series nippon precision circuits inc.?0 nc9801ge 2003.07 please pay your attention to the following points at time of using the products shown in this document. the products shown in this document (hereinafter ?roducts? are not intended to be used for the apparatus that exerts harmful in?ence on human lives due to the defects, failure or malfunction of the products. customers are requested to obtain prior written agreeme nt for such use from nippon precision circuits inc. (hereinafter ?pc?. customers shall be solely responsible for, and indemnify and hold npc free and harmless from, any and all claims, damages, losses, expenses or lawsuits, due to such use without such agreement. npc reserves the right to change the speci?ations of the products in order to improve the characteristic or reliability thereof. npc makes no claim or warranty that the contents described in this document dose not infringe any intellectual property right or other similar right owned by third parties. therefore, npc shall not be responsible for such problems, even if the use is in accordance with the descriptions prov ided in this document. any descriptions including applications, circuits, and the parameters of the products in this document are for refere nce to use the products, and shall not be guaranteed free from defect, inapplicability to the design for the mass-production products without further testing or modi?ation. customers are requested not to export or re-export, directly or indirectly, the products to any country or any entity not in compliance with or in violation of the national export administration laws, treaties, orders and regulations. customers are req uested appropriately take steps to obtain required permissions or approvals from appropriate government agencies. nippon precision circuits inc. 4-3, fukuzumi 2-chome, koto-ku, tokyo 135-8430, japan telephone: +81-3-3642-6661 facsimile: +81-3-3642-6698 http://www.npc.co.jp/ email: sales @ npc.co.jp

▲Up To Search▲

Price & Availability of SM5009AN6S

	To Download SM5009AN6S Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .