? epcos ag 2012. reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without epcos prior express consent is prohibited. saw components saw rf filter for base station lte series/type: ordering code: b5159 B39172B5159U410 date: version: february 15, 2012 2.0
2 february 15, 2012 b5159 1747.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw rf filter data sheet application n rf filter for lte base station n usable passband 75 mhz n high rejection in upper stopband n unbalanced operation features n package size 3.0 x 3.0 x 1.10 mm 3 n package code dcc6c n rohs compatible n approximate weight 0.037 g n ceramic package for s urface m ount t echnology ( smt ) n ni, gold-plated terminals n e lectrostatic s ensitive d evice ( esd ) n filter surface passivated n moisture sensitivity level 1 pin configuration n 2 input n 5 output n 1, 3, 4, 6 to be grounded
3 february 15, 2012 b5159 1747.5 mhz saw components saw rf filter data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = C33 ?c to +100 ?c terminating source impedance: z s =50 w unbalanced and matching network terminating load impedance: z l =50 w unbalanced and matching network min. typ. @ 25 ?c max. nominal frequency f n 1747.5 mhz maximum insertion attenuation a max 2.2 3.3 db (including matching network) amplitude ripple (p-p) da 1710 ... 1785 mhz 0.3 1.2 db 1710 ... 1785 mhz (in any contiguous 5mhz band) 0.1 0.8 db group delay ripple (p-p) dt 1710 ... 1785 mhz 6 20 ns phase ripple (p-p) dj 1710 ... 1785 mhz 12 error vector magnitude 1) evm 1710 ... 1785 mhz 0.2 1.0 2) % absolute group delay t 1710 ... 1785 mhz 13 20 ns relative attenuation (relative to a max ) a rel 70 ... 110 mhz 30 78 db 300 ... 400 mhz 30 61 db 852 ... 1291 mhz 25 44 db 1205 ... 1250 mhz 30 45 db 1372 ... 1603 mhz 25 34 db 1603 ... 1681 mhz 10 17 db 1885 ... 1960 mhz 20 31 db 2110 ... 2170 mhz 25 48 db 2422 ... 2507 mhz 45 52 db 3775 ... 3915 mhz 25 66 db 4295 ... 4942 mhz 15 50 db
4 february 15, 2012 b5159 1747.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw rf filter data sheet matching network to 50 w unbalanced input and output element values depend upon board layout and properties. vswr input 1710 ... 1785 mhz 1.6:1 2.2:1 output 1710 ... 1785 mhz 1.5:1 2.2:1 temperature drift high temperature 3) 1710 ... 1785 mhz 0.2 0.5 4) db low temperature 5) 1710 ... 1785 mhz 0.15 0.4 6) db 1) evm calculation based on root raised cosine filtered qpsk signal (fc rrc within 1717.5 ... 1782.5 mhz, bw rrc = 3.84 mhz) 2) evm relaxed to 2.5 % for fc rrc = 1712.5 mhz for temperatures below 0 ?c 3) t 25?c is transmission at 25 ?c in db,t 100?c at 100 ?c in db 4) 0.35 db for frequency range 1715 ... 1780 mhz (roll-offs excluded) 5) t 25?c is transmission at 25 ?c in db,t -33?c at -33 ?c in db 6) 0.35 db for frequency range 1715 ... 1780 mhz (roll-offs excluded) maximum ratings operable temperature range t C40/+100 ?c storage temperature range t stg C40/+100 ?c dc voltage v dc 5 v esd voltage v esd 50 1) 1) acc. to jesd22-a115a (machine model), 1 negative & 1 positive pulse. v machine model, 1 pulse input power at 1710...1785mhz p in 22 dbm 24 h, 55 c, cw min. typ. @ 25 ?c max. tempdrift hightemp max t 25 c t C 100 c () min t 25 c t C 100 c () C 2 ------------------------------------------------------------------------------------------------------------- - = tempdrift lowtemp max t 25 c t C 33 Cc () min t 25 c t C 33 Cc () C 2 -------------------------------------------------------------------------------------------------------------- = l s1 l p2 l s3 c p4 l s1 = 13.0 nh l p2 = 5.6 nh l s3 = 4.3 nh c p4 = 1.5 pf
5 february 15, 2012 b5159 1747.5 mhz saw components saw rf filter data sheet please read cautions and warnings and important notes at the end of this document. transfer function (s21, narrowband, normalized) transfer function (s21, wideband)
6 february 15, 2012 b5159 1747.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw rf filter data sheet s 11 function s 22 function smith charts
7 february 15, 2012 b5159 1747.5 mhz saw components saw rf filter data sheet please read cautions and warnings and important notes at the end of this document. references type b5159 ordering code B39172B5159U410 marking and package c61157-a7-a67 packaging f61074-v8168-z000 date codes l_1126 s-parameters b5159_nb.s2p, b5159_wb.s2p see file header for port/pin assignment table soldering profile s_6001 rohs compatible defined as compatible with the following documents: "directive 2002/95/ec of the european parliament and of the council of 27 january 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/ec from april 18th, 2005, amending directive 2002/95/ec of the european parliament and of the council for the purposes of establishing the maxi- mum concentration values for certain hazardous substances in electrical and electronic equipment." matching coils see inductor pdf-catalog http:// www .tdk.co.jp/tefe02/coil.htm#aname1 and data library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm for a large variety of matching coils. for further information please contact your local epcos sales office or visit our webpage at w ww.epcos.com . published by epcos ag systems, acoustics, waves business group p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2012. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or t he international representatives. due to technical requirements components may contain dangerous substances. for information on t he type in question please also contact one of our sales offices.
8 february 15, 2012 important notes t he following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, csmp, cssp, ctvs, deltacap, digisimic, dssp, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.
|
