View WLNJ30-TS_7823232.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

wl wl 2 fork lock lever roller lever ordering information basic type side rotary switches actuator part number complete head with lever head built-in switch leverless switch lever short (38 mm radius) wlca2-ts wl-1h1100 wl-1a100 wl-1h w-10fb3 wlrca2-ts medium (50 mm radius) wlca2-7ts wl-1h1200 wl-1a200 long (63 mm radius) wlca2-8ts wl-1h1300 wl-1a300 adjustable roller lever wlca12-ts wl-1h2100 wl-2a100 adjustable rod lever (140 mm) wlcl-ts wl-4h4100 wl-4a100 wl-4h wlrcl-ts left roller on front, wlca32-41ts w l-5h5100 wl-5a100 wl-5h wlrca 32-ts right roller on back left roller on back, wlca32-42ts w l-5h5102 wl-5a102 right roller on front both rollers on front wlca32-43ts w l-5h5104 wl-5a104 rugged diecast housing high mechanical strength oiltight, waterproof, dustproof construction overtravel and high-precision types available choose switches with neon lamp or led status indicator wide selection of two-circuit double-break limit switches robust general-purpose limit switch wl total travel 45 degrees, with one-way operation option, 1/2-14npt conduit (-ts type)
wl wl 3 adj. rod lever adj. roller lever overtravel type side rotary switches actuator part number complete head with lever head built-in switch leverless switch lever roller short (38 mm radius), wlh2-ts wl-2h1100 wl-1a100 wl-2h w-10fb3 wlrh2-ts lever standard sensitivity short, high sensitivity wlg2-ts w-10fb3-8 wlrg2-ts standard sensitivity wlh12-ts wl-2h2100 wl-2a100 w-10fb3 wlrh2-ts high sensitivity wlg12-ts w-10fb3-8 wlrg2-ts 140 mm, std. sensitivity wlhl-ts wl-2h4100 wl-4a100 w-10fb3 wlrh2-ts 140 mm, high sensitivity wlgl-ts w-10fb3-8 wlrg2-ts 380 mm, std. sensitivity wlhal4-ts wl-2h3100 wl-3a100 w-10fb3 wlrh2-ts spring rod lever wlhal5-ts wl-2h3200 wl-3a200 total travel 80 degrees, without one-way operation option, 1/2-14npt conduit (-ts type) overtravel type side rotary switches actuator part number complete head with lever head built-in switch leverless switch lever roller short (38 mm radius) wlca2-2nts wl-6h1100 wl-1a100 wl-6h w-10fb3 wlrca2- lever 2nts adj. roller lever wlca12- wl-6h2100 wl-2a100 wlrca12- 2nts 2nts adj. rod lever, 140 mm wlcl-2nts wl-6h3100 wl-3a100 wlrcal4- 2nts total travel 90 degrees, with one-way operation option (-2n type), 1/2-14npt conduit (-ts type) roller lever high precision type side rotary switches actuator part number complete head with lever head built-in switch leverless switch lever short (38 mm radius) wlgca2-ts wl-1h1100-1 wl-1a100 n/a w-10fb3-4 wlrg ca2-ts medium (50 mm radius) wlgca2-7ts wl-1h1200-1 wl-1a200 long (63 mm radius) wlgca2-8ts wl-1h1300-1 wl-1a300 adjustable roller lever wlgca12-ts wl-1h2100-1 wl-2a100 adjustable rod lever (140 mm) wlgcl-ts wl-4h4100-1 wl-4a100 wlrgcl-ts total travel 45 degrees, with one-way operation option, 1/2-14npt conduit (-ts type)
wl wl 4 plunger switches actuator part number complete switch head with actuator built-in switch top plunger wld-ts wl-7h100 w-10fb3 top roller plunger wld2-ts wl-7h200 top sealed roller plunger wld28-ts wl-7h400 top ball plunger wld3-ts wl-7h300 horizontal plunger wlsd-ts wl-8h100 w-10fb3-4 horizontal roller plunger wlsd2-ts wl-8h200 horizontal ball plunger wlsd3-ts wl-8h300 1/2-14npt conduit (-ts type) coil spring / steel wire switches actuator part number complete switch head with actuator built-in switch coil spring, 6.5 mm dia. wnj-ts wl-9h100 w-10fb3 coil spring, 5.0 mm dia. WLNJ30-TS wl-9h200 steel wire, 1.0 mm dia. wlnj-s2ts wl-9h400 nylon rod, 8.0 mm dia. wlnj-2ts wl-9h300 1/2-14npt conduit (-ts type) status indicator equipped switches any of the wl switches above can be ordered with a neon or led indicator that shows normally open and normally closed status. f or a neon indicator, add " -le " to the end of a part number, for example, wld2-tsle . for an led indicator, add " -ld " to the end of a part number, for example, wlca2-tsld .
wl wl 5 model number legend base units wl - 1 identifier symbol definition 1 electrical ratings none 10a, 125/250/480 vac rivet 01 0.1 a, 125/250 vac micro current/voltage crossbar 2 head, actuator see following "head and actuator chart" 3 corrosion none non-corrosion-proof or acid-proof rp corrosion-proof type p1 acid-proof type 4 built-in switch none w-10fb3 (standard type) 55 w-10fb3-55 (special hermetic type) 5 operating temp. none -10 c to 80 c th 5 c to 120 c (high temp. type) tc -40 c to 40 c (low temp. type) 6 special hermetic none without cable/no part is molded/standard switch (w-10fb3) 136 with 5m vci cable pre-wired/conduit opening is resin-molded/standard built-in switch (w-10fb3) 139 with 5m vci cable pre-wired/conduit opening and case cover are resin-molded/standard built-in switch (w-10fb3) 140 with 5m vci cable pre-wired/special hermetic built-in switch (w-10fb3-55) 141 with 5m vci cable pre-wired/conduit opening and case cover are resin-molded/special hermetic built-in switch (w-10fb3-55) rp40 with 5m s-flex cable pre-wired/conduit opening and case cover are resin-molded/special hermetic built-in switch (w-10fb3-55)/special molding head rp60 with 5m s-flex cable pre-wired/conduit opening and case cover are resin-molded/special hermetic built-in switch (w-10fb3-55)/viton sealed 7 conduit none pf 1 / 2 without earth terminal g1 pf 1 / 2 with earth terminal g pg 13.5 with earth terminal y m20 with earth terminal ts 1 / 2 -14npt with earth terminal 8 operating indicator none without indicator le with neon indicator (125 to 250 vac) ld with led indicator (10 to 115 vac/vdc) 9 lever clamping none with single nuts a with double nuts 10 spatter proof option none non-spatter-proof type s spatter-proof type 11 pre-wired connector/ none screw terminal receptacle option k13 4-pin receptacle (no, dc type, wired no.3 & no.4) k13a 4-pin receptacle (no, ac type, wired no.3 & no.4) k43 4-pin receptacle (dc type, all wired) k43a 4-pin receptacle (ac type, all wired) -m1j pre-wired connector (4-pin, no, dc type, wired no.3 & no.4, 0.3m cable) -agj03 pre-wired connector (4-pin, ac type, 0.3m cable) -dgj03 pre-wired connector (4-pin, dc type, 0.3m cable) 2 34567891011
wl wl 6 head and actuator chart symbol definition ca2 roller lever, short (38 mm radius), with one-way operation option ca2-7 roller lever, medium (50 mm radius), with one-way operation option ca2-8 roller lever, long (63 mm radius), with one-way operation option h2 roller lever, short (38 mm radius), overtravel: 80 degrees g2 roller lever, short (38 mm radius), overtravel: 80 degrees, high sensitivity ca2-2 roller lever, short (38 mm radius), overtravel: 90 degrees ca2-2n roller lever, short (38 mm radius), overtravel: 90 degrees, with one-way operation option gca2 roller lever, short (38 mm radius), high precision, with one-way operation option gca2-7 roller lever, medium (50 mm radius), high precision, with one-way operation option gca2-8 roller lever, long (63 mm radius), high precision, with one-way operation option ca12 adjustable roller lever, with one-way operation option h12 adjustable roller lever, overtravel: 80 degrees g12 adjustable roller lever, overtravel: 80 degrees, high sensitivity ca12-2 adjustable roller lever, overtravel: 90 degrees ca12-2n adjustable roller lever, overtravel: 90 degrees, with one-way operation option gca12 adjustable roller lever, high precision cl adjustable rod lever (140 mm), with one-way operation option hl adjustable rod lever (140 mm), overtravel: 80 degrees hlal4 adjustable rod lever (380 mm), overtravel: 80 degrees gl adjustable rod lever (140 mm), overtravel: 80 degrees, high sensitivity cl-2n adjustable rod lever (140 mm), overtravel: 90 degrees, with one-way operation option hal5 spring rod lever, overtravel: 80 degrees ca32-41 fork lock lever, left roller on front, right roller on back, with one-way operation option ca32-42 fork lock lever, left roller on back, right roller on front, with one-way operation option ca32-43 fork lock lever, both rollers on front, with one-way operation option d top plunger d2 top roller plunger d28 top sealed roller plunger d3 top ball plunger sd horizontal plunger sd2 horizontal roller plunger sd3 horizontal ball plunger nj coil spring, 6.5 mm dia. nj-30 coil spring, 5.0 mm dia. nj-2 nylon rod, 8.0 mm dia. nj-2s steel wire, 1.0 mm dia.
wl wl 7 rated voltage non-inductive load inductive load resistive load lamp load inductive load motor load nc no nc no nc no nc no 125 vac 10 a 10 a 3 a 1.5a 10 a 5 a 2.5 a 250 vac 10 a 10 a 2 a 1 a 10 a 3 a 1.5 a 480 vac 10 a 10 a 1.5 a 0.8 a 3 a 1.5 a 0.8 a 600 vac 3 a 1 a 1 a 0.5 a 1.5 a 1 a 0.5 a 8 vdc 10 a 6 a 3 a 10 a 6 a 14 vdc 10 a 6 a 3 a 10 a 6 a 30 vdc 6 a 4 a 3 a 6 a 4 a 125 vdc 0.8 a 0.2 a 0.8 a 0.2 a 250 vdc 0.4 a 0.1 a 0.4 a 0.1 a microvoltage/current load model (wl01 ) note: 1. inductive loads have a power factor of 0.4 min. (ac) and a time constant of 7 ms max. (dc). 2. lamp load has an inrush current of 10 times the steady-state current. 3. motor load has an inrush current of 6 times the steady-state current. construction too much overtravel, adjustment needed. too much overtravel, adjustment needed. too little overtravel, adjustment needed. normal operation normal operation operating head roller lever, rod lever and side plunger types may be locked in at any of four 90 positions. proper operation zone markers two raised markers on the shaft housing indicate the proper limits for normal operation to simplify installation. axis bearing assures smooth plunger movement. shaft seal o-ring provides a high degree of sealing. built-in switch long mechanical life of 15 million operations, minimum. conduit entrance 1/2-14 npt roller sintered stainless steel with self- lubricating bearing resists wear. lever aluminum alloy resists corrosion. roller lever mounting screw cover seal o-ring provides a high degree of sealing. terminal screws four m4 screws insulation material provides insulation and seals out corrosive gas. cover mounting screws self-retaining phillips head screws will not fall out. specifications general ratings rated voltage resistive load 125 vac 0.1 a 30 vdc
wl wl 8 en60947-5-1 ratings current (ma) voltage (vdc) recommended load range (dc only) zones 1 through 3 note: without neon lamp model model category and rating thermal current (i the ) indicator wl ac-15 2 a/250 vac 10 a none dc-12 2 a/48 vdc wl01 ac-14 0.1 a/125 vac 0.5 a none dc-12 0.1 a/48 vdc wl -le ac-15 2 a/250 vac 10 a neon lamp wl01 -le ac-14 0.1 a/125 vac 0.5 a neon lamp wl -ld ac-15 2 a/115 vac 10 a led dc-12 2 a/48 vdc wl01 -ld ac-14 0.1 a/115 vac 0.5 a led dc-12 0.1 a/48 vdc
wl wl 9 approved standards approval standard file no. ul ul508 e76675 csa csa c22.2 no. 14 lr45746 tuv en60947-5-1 r9551016 sev sev 93.5 51936.01 lr lr 88/10274 (e3) characteristics operating speed 1 mm/s to 2 m/s (with wlca2) operating frequency mechanical 120 operations/min. electrical 30 operations/min. insulation resistance 100 m ? min. (at 500 vdc) contact resistance 25 m ? (initial) dielectric strength 1,000 vac (600 vac for overtravel model), 50/60 hz for 1 min between non-continuous terminals 2,200 vac, 50/60 for 1 min between each terminal and non-current- carrying metal part and between each terminal and ground rated impulse withstand voltage (u imp )4 kv rated insulation voltage (u i ) 300 vac (en60947-5-1) thermal current (i the ) 10 a (0.5 a for micro load type) (en60947-5-1) short-circuit protective device 10 a fuse (type gg, iec269 approved, en60947-5-1) conditional short circuit current 100 a (en60947-5-1) operating environment pollution degree 3 (en60947-5-1) protection against electric shock class i temperature rise 50 max vibration resistance malfunction 10 to 55 hz, 1.5 mm double amplitude shock resistance (see note 1.) destruction 1,000 m/s 2 (approx. 100g) malfunction 300 m/s 2 (approx. 30 g) ambient temperature operating -10 c to 80 c (14 f to 176 f) with no icing ambient humidity operating 95% max life expectancy mechanical 15,000,000 operations min. (see note 2.) electrical see engineering data enclosure ratings ul types 3, 4 and 13 nema types 1, 2, 3, 3r, 4, 5, 6, 12 and 13 iec ip67 weight approx. 275 g (with wlca2) note: 1. excludes the coil spring models (-nj) 2. overtravel model, low differential model, wobble stick model and micro load model: 10,000,000 operations min. ..
wl wl 10 operating characteristics legend: of = operating force (max.); rf = reset force (min.); ot = overtravel (min.); pt = pretravel md = movement differential (max.); op = operating position; tt = total travel (min.); ttp = total travel position (mm/inch) note: * operating characteristics of wlca-12-ts is measured at arm length of 38 mm (1.496 in). ** operating characteristics of wlcl-ts is measured at the rod length of 140 mm (5.512 in) *** operating characteristics are measured at the tip of the coil spring or steel wire. part number description of rf ot pt md op tt(p) wlca2-ts short roller lever 1.36 kg 227 g 30 15 5 12 ?0 (3 lb) (8.01 oz.) wlca2-7ts medium roller lever 1.04 kg 170 g 30 15 5 12 ?0 (2.3 lb) (6.00 oz.) wlca2-8ts long roller lever 820 g 137 g 30 15 5 12 ?0 (28.92 oz.) (4.83 oz.) wlca12-ts* adjustable roller 1.36 kg 227 g 30 15 5 12 ?0 lever (3 lb) (8.01 oz.) wlcl-ts** adjustable rod 142 g 28 g 30 15 5 12 ?0 lever (5.00 oz.) (0.99 oz.) wlca32-41ts fork roller lever, 1.2 kg 35 50 5 90 10 left front, right back (2.7 lb) wlca32-42ts fork roller lever, 1.2 kg 35 50 5 90 10 left back, right front (2.7 lb) wlca32-43ts fork roller lever, 1.2 kg 35 50 5 90 10 both on front (2.7 lb) wld-ts plain top plunger 2.72 kg 910 g 6.4 mm 1.7 mm 1 mm 34 0.8 mm 29.5 mm (6 lb) (2.01 lb) (0.252 in) (0.067 in) (0.04 in) (1.34 0.03 in) (1.16 in) wld2-ts top roller plunger 2.72 kg 910 g 5.6 mm 1.7 mm 1 mm 44 0.8 mm 39.5 mm (6 lb) (2.01 lb) (0.220 in) (0.067 in) (0.04 in) (1.73 0.03 in) (1.56 in) wld28-ts top sealed roller 1.7 kg 450 g 5.6 mm 1.7 mm 1 mm 44 0.8 mm 39.5 mm plunger (3.75 lb) (15.87 oz.) (0.220 in) (0.067 in) (0.04 in) (1.73 0.03 in) (1.56 in) wld3-ts top ball plunger 2.72 kg 910 g 4 mm 1.7 mm 1 mm 44.5 0.8 mm 41 mm (6 lb) (2.01 lb) (0.157 in) (0.067 in) (0.04 in) (1.75 0.03 in) (1.61 in) wlsd-ts horizontal plain 4.082 kg 907 g 6.4 mm 2.8 mm 1 mm 40.6 0.8 mm plunger (9.01 lb) (2.00 lb) (0.252 in) (0.110 in) (0.04 in) (1.60 0.03 in) wlsd2-ts horizontal roller 4.082 kg 907 g 5.6 mm 2.8 mm 1 mm 54.2 0.8 mm plunger (9.01 lb) (2.00 lb) (0.220 in) (0.110 in) (0.04 in) (2.13 0.03 in) wlsd3-ts horizontal ball 4.082 kg 907 g 4 mm 28 mm 1 mm 54.2 0.8 mm plunger (9.01 lb) (2.00 lb) (0.157 in) (0.110 in) (0.04 in) (2.13 0.03 in) wlnj-ts*** coil spring, 150 g 20 mm 10 mm 6.5 mm dia. (5.29 oz.) (0.79 0.39 in) WLNJ30-TS*** coil spring, 150 g 20 mm 10 mm 5.0 mm dia. (5.29 oz.) (0.79 0.39 in) wlnj-s2ts*** steel wire 29 g 40 mm 20 mm (1.02 oz.) (1.58 0.79 in) wlnj-2ts*** nylon rod 150 g 40 mm 20 mm (5.29 oz.) (1.58 0.79 in)
wl wl 11 engineering data electrical life expectancy switching current (ma) life expectancy (x 10 3 operations) operation contact form standard/microload models spst-no model no nc (4) (3) no nc (1) (2) no no contact ratings nema a600 for spdt switches without status indicators: 10 a at 125, 250, 480 vac 1/2 hp at 125 vac, 1 hp at 250 vac 0.8 a at 125 vdc, 0.4 a at 250 vdc 0.1 a at 600 vdc nema a300 for spdt switches with neon status indicator type contact resistance 25 m ? max (initial) electrical approvals ul recognized, file no. e76675 csa certified, file no. lr45746
wl wl 12 actuators for rotary switches such as wlca ? -ts roller lever and wlcl-ts rod lever switches can be positioned within a 360 range. loosen the allen-head set bolt on the side of the actuator, position the actuator, then tighten in place. actuator lever can be installed at any angle in 360 . rotary actuator positioning the operating head of many switches can be set to four 90 positions to match installation requirements. loosen the four phillips head screws on the operating head, and lift the head off. then, position with the shaft in the desired direction. replace the four screws to fasten the operating head. applicable switches include those with roller levers (wlca ? - ts), rod levers (wlcl-ts), horizontal plungers (wlsd ? -ts) and roller plungers (wld2-ts and wld28-ts). operating head positioning example of roller lever, rod lever and horizontal plunger switches head loosen the screws example of roller plunger switches rotary actuator switches can be set for clockwise (cw), counterclockwise (ccw) or operation both ways (cw+ccw). to change the operating direction, loosen the four screws on the switch head. then, lift off the head. the plunger marker inside is set parallel with the face plate, as shown at right. turn the plunger so the marking faces left for cw or right for ccw as shown. replace the actuator head in the direction suitable for the installation and tighten the four screws. operating direction of standard switches operates ccw 90 operation to left cw+ccw (both ways operation) operates operates cw 90 operation to right operates roller lever actuator positioning the roller(s) on roller lever actuators may be faced inward toward the operating head or use the more typical installation with the roller lever facing away from the body. to change the actuator position, loosen the allen-head set bolt, pull the actuator off, and reposition it on the shaft. then, tighten the set bolt at the desired angle. loosen the allen-head set bolt fork roller lever actuators the illustration at right indicates the differences among the fork lever actuators. all may be reversed as shown above.
wl wl 13 status indicator equipped switch operation wl switches are available with neon lamp (wl ???? -ts-le) or led (wl ???? -ts- ld) status indicators for easy monitoring and troubleshooting. they come factory- set for normally open operation on. it is easy to change the status to normally closed operation on. see the installation section for details. part number indicator type rated voltage leakage current wl ???? -ts-le neon lamp 125 vac approx. 0.6 ma 250 vac approx. 1.9 ma wl ???? -ts-ld led 10 to 115 vac approx. 1 ma 10 to 115 vdc factory installed position for normally open on indicator lights when nc contacts release (when actuator rotates or is pushed down) indicator is lit while actuator is free, then goes off when no contacts close: when actuator rotates or is pushed down when connecting a limit switch to a programmable controller, select the neon lamp or led with the smallest leakage current. refer to the table at right. to change operation to normally closed on, remove the cover from the switch body, and rotate lamp holder 180 . then, replace the unit in the housing. switches with adjustable lever and rod actuators can be set to desired length by loosening the allen-head set screw, setting the length. then tighten the set screw. rod lever switch adjustable roller lever switch adjusting lever and rod length
wl wl 14 limit switches unit: mm (inch) wlca2-ts short roller lever switch wlca2-7ts medium roller lever switch dimensions wlca2-8ts long roller lever switch
wl wl 15 wlca32-41, wlca32-42, wlca32-43 fork roller lever switches unit: mm (inch) wlcl-ts adjustable rod lever switch wlca12-ts adjustable roller lever switch
wl wl 16 wld-ts plain plunger switch wld2-ts roller plunger switch wld28-ts sealed roller plunger switch wld3-ts ball plunger switch
wl wl 17 wlsd3-ts horizontal ball plunger switch unit: mm (inch) wlsd2-ts horizontal roller plunger switch wlsd-ts horizontal plain plunger switch
wl wl 18 wlnj-ts coil spring switch wlnj-s2ts steel wire switch WLNJ30-TS coil spring switch
wl wl 19 overtravel type standard limit switches overtravel limit switches overtravel type limit switches offer a longer overtravel (ot) to accommodate different cam shapes. the key difference between "standard" and "overtravel" is in the angle of operation: overtravel types can operate at 90 on either side of the center point. standard types are recommended for operation at 45 on either side of the center point. however, overtravel type switches cannot be expected to provide 90 operation on only one side. customized models installation mounting holes most wl switches wlnj-2ts nylon rod switch unit: mm (inch)
wl wl 20 dimensions unit: mm (inch) wlca2-2ts short roller lever overtravel switch wlca12-2ts adjustable roller lever overtravel switch note: levers for wlcal4-2-ts and wlcal5-2-ts have a large tare, so positioning the actuator with the bottom up will reduce chattering . operating characteristics of wlca12-2-ts are measured at arm length of 38 mm (1.29 in). operating characteristics of wlcl-2-ts are at arm length of 140 mm (5.51 in) operating characteristics of wlcal4-2-ts are measured at rod length of 380 mm (1.25 ft) operating characteristics of wlcal5-2-ts are measured at rod length of 412.5 mm (1.35 ft) legend: of = operating force (max.); rf = reset force (min.); ot = overtravel (min.); pt = pretravel md = movement differential (max.); op = operating position; tt = total travel (min.) operating characteristics part number description of rf ot pt md tt wlca2-2-ts short roller lever 900 g (31.74 oz.) 50 g (1.76 oz.) 60 25 5 16 90 wlca12-2-ts adjustable roller lever 900 g (31.74 oz.) 50 g (1.76 oz.) 60 25 5 16 90 wlcl-2-ts adjustable rod lever, 140 mm l 260 g (9.17 oz.) 10 g (0.35 oz.) 60 25 5 16 90 wlcal4-2-ts adjustable rod lever, 380 mm l 80 g (2.82 oz.) 8 g (0.28 oz.) 60 25 5 16 90 wlcal5-2-ts spring 80 g (2.82 oz.) 8 g (0.28 oz.) 60 25 5 16 90
wl wl 21 wlcal5-2ts adjustable spring lever overtravel switch unit: mm (inch) wlcal4-2ts long adjustable rod lever overtravel switch wlcl-2ts adjustable rod lever overtravel switch
wl wl 22 legend: of = operating force (max.); rf = reset force (min.); ot = overtravel (min.); pt = pretravel; md = movement differential (max.) operating characteristics part number description of rf ot pt md wlgca2-ts short roller lever 1.3 kg (47.97 oz.) 150 g (5.29 oz.) 40 5 (+2 /-0 )3 wlgca2-2-ts overtravel short roller lever 900 g (31.74 oz.) 50 g (1.76 oz.) 85 8 max. 3 wlgca2-7-ts medium roller lever 1.04 kg (36.68 oz.) 110 g (3.88 oz.) 40 5 3 wlgca2-8-ts long roller lever 820 g (28.92 oz.) 90 g (3.17 oz.) 40 5 3 wlgca12-ts adjustable roller lever 1.36 kg (47.97 oz.) 150 g (5.29 oz.) 40 5 (+2 /-0 )3 wlgcl-ts adjustable rod lever, 140 mm l 400 g (14.1 oz.) 10 g (0.35 oz.) 40 5 (+2 /-0 )3 note: operating characteristics of wlgca12-ts are measured at arm length of 38 mm (1.29 in). operating characteristics of wlgcl-ts are at arm length of 140 mm (5.51 in) dimensions unit: mm (inch) wlgca2-ts short roller lever high precision switch the key differences between "high- precision" and "standard" limit switches are in the pretravel (pt) ratings and the repeat accuracy. high-precision switches have a pretravel (pt) of 5 compared to 20 for standard switches. the repeat accuracy is best compared by referring to the graph at right. high- precision switches are ideal for position- ing control in machine tools and other applications. high-precision type
wl wl 23 wlgca2-8ts long roller lever high precision switch unit: mm (inch) wlgca2-7ts medium roller lever high precision switch wlgca2-2ts short overtravel roller lever high precision switch
wl wl 24 wlgcl-ts adjustable rod lever high precision switch wlgca12-ts adjustable roller lever high precision switch
wl wl omron electronics llc omron canada, inc. one east commerce drive 885 milner avenue schaumburg, il 60173 scarborough, ontario m1b 5v8 1-800-55-omron 416-286-6465 cat. no. cedsax4 11/01 specifications subject to change without notice. printed in the u.s.a. omron on-line global - http://www.omron.com usa - http://www.omron.com/oei canada - http://www.omron.com/oci

▲Up To Search▲

Price & Availability of WLNJ30-TS

	To Download WLNJ30-TS Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .