Part Number Hot Search : 
TRT1FI IXD5120 UNR9111G MC100LV A623308 74AC2 PC354 1560A
Product Description
Full Text Search
 

To Download MAX11203 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  18-bit, single-channel, ultra-low power, delta- sigma adc with 2-wire serial interface 19-5247; rev 0; 4/10 ordering information selector guide general description the max11212 is an ultra-low power (< 300 f a max active current), high-resolution, serial-output adc. this device provides the highest resolution per unit power in the industry, and is optimized for applications that require very high dynamic range with low power such as sensors on a 4ma to 20ma industrial control loop. the max11212 provides a high-accuracy internal oscillator that requires no external components. when used with the specified data rates, the internal digital filter provides more than 80db rejection of 50hz or 60hz line noise. the max11212 provides a simple 2-wire serial interface in the space-saving, 10-pin f max m pack - age. the max11212 operates over the -40 n c to +85 n c temperature range. applications sensor measurement (temperature and pressure) portable instrumentation battery applications weigh scales features s 18-bit full-scale resolution s 720nv rms noise (max11212b) s 3ppm inl s no missing codes s ultra-low-power dissipation operating-mode current drain < 300a (max) sleep-mode current drain < 0.1a s 2.7v to 3.6v analog supply voltage range s 1.7v to 3.6v digital and i/o supply voltage range s fully differential signal inputs s fully differential reference inputs s internal system clock 2.4576mhz (max11212a) 2.2528mhz (max11212b) s external clock s serial 2-wire interface (clock input and data output) s on-demand offset and gain self-calibration s -40c to +85c operating temperature range s 2kv esd protection s lead(pb)-free and rohs-compliant max package note: all devices are specified over the -40c to +85c oper - ating temperature range. + denotes a lead(pb)-free/rohs-compliant package. *future product contact factory for availability. max is a registered trademark of maxim integrated products, inc. resolution (bits) 4-wire spi, 16-pin qsop, programmable gain 4-wire spi, 16-pin qsop 2-wire serial, 10-pin max 24 max11210 max11200 max11201 (with buffers) max11202 (without buffers) 20 max11206 max11207 max11208 18 max11209 max11211 max11212 16 max11213 MAX11203 max11205 part pin-package output rate (sps) max11212aeub+* 10 f max 120 max11212beub+ 10 f max 13.75 max11212 for pricing, delivery, and ordering information, please contact maxim direct at 1-888-629-4642, or visit maxims website at www.maximintegrated.com.
2 stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. these are stress rating s only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specificatio ns is not implied. exposure to absolute maximum rating conditions for extended periods may affect device reliability. any pin to gnd .................................................... -0.3v to +3.9v avdd to gnd ....................................................... -0.3v to +3.9v dvdd to gnd ...................................................... -0.3v to +3.9v analog inputs (ainp, ainn, refp, refn) to gnd ............................................. -0.3v to (v avdd + 0.3v) digital inputs and digital outputs to gnd ............................................. -0.3v to (v dvdd + 0.3v) esd hb (avdd, ainp, ainn, refp, refn, dvdd, clk, sclk, rdy /dout, gnd) ........................................... q 2kv (note 1) continuous power dissipation (t a = +70 n c) 10-pin f max (derate 5.6mw/ n c above +70 n c) .......... 444mw operating temperature range .......................... -40 n c to +85 n c junction temperature ..................................................... +150 n c storage temperature range ............................ -55 n c to +150 n c lead temperature (soldering, 10s) ................................ +300 n c soldering temperature (reflow) ...................................... +260 n c electrical characteristics (v avdd = +3.6v, v dvdd = +1.8v, v refp - v refn = v avdd ; internal clock, t a = t min to t max , unless otherwise noted. typical values are at t a = +25 n c under normal conditions, unless otherwise noted.) absolute maximum ratings note 1: human body model to specification mil-std-883 method 3015.7. parameter symbol conditions min typ max units adc performance noise-free resolution nfr (notes 2, 3) 18 bits thermal noise (notes 2, 3) v n max11212a 2.1 f v rms max11212b 0.72 integral nonlinearity inl (note 4) -10 +10 ppmfsr zero error v off after calibration, v refp - v refn = 2.5v -20 1 +20 ppmfsr zero drift 50 nv/ n c full-scale error after calibration, v refp - v refn = 2.5v (note 5) -35 3 +35 ppmfsr full-scale error drift 0.05 ppmfsr/ n c power-supply rejection avdd dc rejection 70 80 db dvdd dc rejection 90 100 analog inputs/reference inputs common-mode rejection cmr dc rejection 90 123 db 50hz/60hz rejection max11212a 90 50hz/60hz rejection max11212b 144 normal-mode 50hz rejection nmr 50 max11212b (note 6) 65 80.5 db normal-mode 60hz rejection nmr 60 max11212b (note 6) 73 87 db common-mode voltage range gnd v avdd v absolute input voltage low input voltage gnd - 30mv v high input voltage v avdd + 30mv dc input leakage sleep mode (note 2) 1 f a ain dynamic input current 5 f a ref dynamic input current 7.5 f a ain input capacitance 10 pf maxim integrated 18-bit, single-channel, ultra-low power, delta- sigma adc with 2-wire serial interface max11212
3 18-bit, single-channel, ultra-low power, delta- sigma adc with 2-wire serial interface electrical characteristics (continued) (v avdd = +3.6v, v dvdd = +1.8v, v refp - v refn = v avdd ; internal clock, t a = t min to t max , unless otherwise noted. typical values are at t a = +25 n c under normal conditions, unless otherwise noted.) parameter symbol conditions min typ max units ref input capacitance 15 pf ain voltage range v ainp - v ainn -v ref +v ref v ref voltage range v avdd v input sampling rate f s max11212a 246 khz max11212b 225 ref sampling rate max11212a 246 khz max11212b 225 logic inputs (sclk, clk) input current input leakage current 1 f a input low voltage v il 0.3 x v dvdd v input high voltage v ih 0.7 x v dvdd v input hysteresis v hys 200 mv external clock max11212a 2.4576 mhz max11212b 2.2528 logic outputs ( rdy /dout) output low level v ol i ol = 1ma; also tested for v dvdd = 3.6v 0.4 v output high level v oh i oh = 1ma; also tested for v dvdd = 3.6v 0.9 x v dvdd v floating state leakage current output leakage current 10 f a floating state output capacitance 9 pf power requirements analog supply voltage avdd 2.7 3.6 v digital supply voltage dvdd 1.7 3.6 v total operating current avdd + dvdd 230 300 f a dvdd operating current 45 60 f a avdd operating current 185 245 f a avdd sleep current 0.4 2 f a dvdd sleep current 0.35 2 f a 2-wire serial-interface timing characterisitcs sclk frequency f sclk 5 mhz sclk pulse width low t 1 60/40 duty cycle 5mhz clock 80 ns sclk pulse width high t 2 40/60 duty cycle 5mhz clock 80 ns sclk rising edge to data valid transition time t 3 40 ns maxim integrated max11212
4 electrical characteristics (continued) (v avdd = +3.6v, v dvdd = +1.8v, v refp - v refn = v avdd ; internal clock, t a = t min to t max , unless otherwise noted. typical values are at t a = +25 n c under normal conditions, unless otherwise noted.) note 2: these specifications are not fully tested and are guaranteed by design and/or characterization. note 3: v ainp = v ainn . note 4: ppmfsr is parts per million of full-scale range. note 5: positive full-scale error includes zero-scale errors. parameter symbol conditions min typ max units sclk rising edge data hold time t 4 allows for positive edge data read 3 ns rdy/dout fall to sclk rising edge t 5 0 ns next data update time; no read allowed t 6 max11212a 155 f s max11212b 169 data conversion time t 7 max11212a 8.6 ms max11212b 73 data ready time after calibration starts (cal + cnv) t 8 max11212a 208.3 ms max11212b 256.1 sclk high after rdy/dout goes low to activate sleep mode t 9 max11212a 0 8.6 ms max11212b 0 73 time from rdy/dout low to sclk high for sleep mode activation t 10 max11212a 0 8.6 ms max11212b 0 73 data ready time after wake-up from sleep mode t 11 max11212a 8.6 ms max11212b 73 data ready time after calibration from sleep mode wake-up (cal + cnv) t 12 max11212a 208.4 ms max11212b 256.2 maxim integrated 18-bit, single-channel, ultra-low power, delta- sigma adc with 2-wire serial interface max11212
5 18-bit, single-channel, ultra-low power, delta- sigma adc with 2-wire serial interface typical operating characteristics (v avdd = 3.6v, v dvdd = 1.8v, v refp - v refn = v avdd ; internal clock; t a = t min to t max , unless otherwise noted. typical values are at t a = +25 n c.) analog active current vs. avdd voltage (max11212a) max11212 toc01 avdd voltage (v) current (a) 3.45 3.30 3.15 3.00 2.85 120 140 160 180 200 220 240 v dvdd = 1.8v t a = +85 c t a = +25 c t a = -45 c 100 2.70 3.60 analog active current vs. avdd voltage (max11212b) max11212 toc02 avdd voltage (v) current (a) 3.45 3.30 3.15 3.00 2.85 120 140 160 180 200 220 240 v dvdd = 1.8v t a = +85 c t a = +25 c t a = -45 c 100 2.70 3.60 analog sleep current vs. avdd voltage (max11212a/ max11212b) max11212 toc03 avdd voltage (v) current (a) 3.5 3.4 3.3 3.2 3.1 3.0 2.9 2.8 0.2 0.4 0.6 0.8 1.0 0 2.7 3.6 v dvdd = 1.8v t a = -45c t a = +85c t a = +25c active supply current vs. temperature (max11212a) max11212 toc04 temperature (c) current (a) 75 55 35 15 -5 -25 50 100 150 200 250 300 0 -45 95 total v avdd = 3.6v v dvdd = 1.8v active supply current vs. temperature (max11212b) max11212 toc05 temperature (c) current (a) 75 55 35 15 -5 -25 50 100 150 200 250 300 0 -45 95 total v avdd = 3.6v v dvdd = 1.8v sleep current vs. temperature (max11212a/ max11212b) max11212 toc06 temperature (c) current (a) 75 55 35 15 -5 -25 0.2 0.4 0.6 0.8 1.0 0 -45 95 v avdd = 3.6v v dvdd = 1.8v v avdd v dvdd total digital active current vs. dvdd voltage max11212 toc07 dvdd voltage (v) current (a) 3.4 3.2 2.8 3.0 2.0 2.2 2.4 2.6 1.8 50 60 70 80 90 100 110 120 130 40 1.6 3.6 v avdd = 3.6v t a = +85c, +25c, -45c max11212a max11212b digital sleep current vs. dvdd voltage (max11212a/ max11212b) max11212 toc08 dvdd voltage (v) current (a) 3.3 3.1 2.9 2.7 2.5 2.3 2.1 1.9 0.5 1.0 1.5 2.0 2.5 3.0 0 1.7 3.5 v avdd = 3.6v t a = -45c t a = +25c t a = +85c internal oscillator frequency vs. temperature max11212 toc09 temperature (c) frequency (mhz) 75 55 35 15 -5 -25 2.1 2.2 2.3 2.4 2.5 2.6 2.0 -45 95 v dvdd = 1.8v v avdd = 3.0v max11212a max11212b maxim integrated max11212
6 typical operating characteristics (continued) (v avdd = 3.6v, v dvdd = 1.8v, v refp - v refn = v avdd ; internal clock; t a = t min to t max , unless otherwise noted. typical values are at t a = +25 n c.) internal oscillator frequency vs. avdd voltage max11212 toc10 avdd voltage (v) frequency (mhz) 3.45 3.30 3.15 3.00 2.85 2.2 2.3 2.4 2.5 2.6 2.1 2.70 3.60 v dvdd = 1.8v max11212a max11212b offset error vs. v ref (max11212a/ max11212b) max11212 toc11 v ref voltage (v) offset error (ppmfsr) 3.5 3.0 2.5 2.0 1.5 -0.5 0 0.5 1.0 1.5 2.0 -1.0 1.0 4.0 v ref = v refp - v refn t a = +85c t a = -45c t a = +25c offset error vs. temperature (max11212a/ max11212b) max11212 toc12 temperature (c) offset error (ppmfsr) 75 55 35 15 -5 -25 0.5 1.0 1.5 2.0 2.5 0 -45 95 calibrated at +25c integral nonlinearity vs. input voltage (max11212a/ max11212b) max11212 toc13 input voltage (v) inl (ppmfsr) 2.0 1.5 0.5 1.0 -1.5 -1.0 -0.5 0 -2.0 -8 -6 -4 -2 0 2 4 6 8 10 -10 -2.5 2.5 v avdd = 3.0v v dvdd = 1.8v v ref = 2.5v v in(cm) = 1.5v t a = +25c t a = -45c t a = +85c max11212 toc14 temperature (c) normalized full-scale error (ppmfsr) full-scale error vs. temperature (max11212a/ max11212b) 75 55 15 35 -5 -25 -8 -6 -4 -2 0 2 4 6 8 10 -10 -45 v ref = 2.5v +fs error -fs error psrr vs. frequency (max11212a) max11212 toc15 frequency (hz) psrr (db) 10k 1k 100 10 -120 -100 -80 -60 -40 -20 0 -140 1 100k v dvdd v avdd psrr vs. frequency (max11212b) max11212 toc16 frequency (hz) psrr (db) 10k 1k 100 10 -120 -100 -80 -60 -40 -20 0 -140 1 100k v dvdd v avdd cmrr vs. frequency (max11212a/ max11212b) max11212 toc17 frequency (hz) cmrr (db) 10k 1k 100 10 -120 -100 -80 -60 -40 -20 0 -140 1 100k max11212a max11212b normal-mode frequency response (max11212a) max11212 toc18 frequency (hz) gain (db) 100 10 -120 -100 -80 -60 -40 -20 0 -140 11 k maxim integrated 18-bit, single-channel, ultra-low power, delta- sigma adc with 2-wire serial interface max11212
7 18-bit, single-channel, ultra-low power, delta- sigma adc with 2-wire serial interface typical operating characteristics (continued) (v avdd = 3.6v, v dvdd = 1.8v, v refp - v refn = v avdd ; internal clock; t a = t min to t max , unless otherwise noted. typical values are at t a = +25 n c.) functional diagram normal-mode frequency response (max11212b) max11212 toc19 frequency (hz) gain (db) 100 10 -120 -100 -80 -60 -40 -20 0 -140 11 k normal-mode rejection of 50hz to 60hz (max11212b) max11212 toc20 frequency (hz) gain (db) 65 60 55 50 45 -120 -100 -80 -60 -40 -20 0 -140 40 70 timing clock generator digital logic and serial- interface controller digital filter (sinc 4 ) 3rd-order delta-sigma modulator clk avdd max11212 refp refn ainp ainn dvdd gnd sclk rdy/dout maxim integrated max11212
8 pin description pin configuration + 1 2 3 4 5 10 9 8 7 6 clk sclk dvdd ainn refn refp gnd max11212 max top view avdd ainp rdy/dout pin name function 1 gnd ground. ground reference for analog and digital circuitry. 2 refp differential reference positive input. refp must be more positive than refn. connect refp to a voltage between avdd and gnd. 3 refn differential reference negative input. refn must be more negative than refp. connect refn to a voltage between avdd and gnd. 4 ainn negative fully differential analog input 5 ainp positive fully differential analog input 6 avdd analog supply voltage. connect a supply voltage between +2.7v to +3.6v with respect to gnd. 7 dvdd digital supply voltage. connect a digital supply voltage between +1.7v to +3.6v with respect to gnd. 8 rdy /dout data-ready output/serial-data output. this output serves a dual function. in addition to the serial-data output function, the rdy /dout also indicates that the data is ready when the rdy is logic-low. rdy /dout changes on the falling edge of sclk. 9 sclk serial-clock input. apply an external serial clock to sclk. 10 clk external clock signal input. the internal clock shuts down when clk is driven by an external clock. use a 2.4576mhz oscillator (max11212a) or a 2.2528mhz oscillator (max11212b). maxim integrated 18-bit, single-channel, ultra-low power, delta- sigma adc with 2-wire serial interface max11212
9 18-bit, single-channel, ultra-low power, delta- sigma adc with 2-wire serial interface detailed description the max11212 is an ultra-low-power (< 240 f a active), high-resolution, low-speed, serial-output adc. this device provides the highest resolution per unit power in the indus - try, and is optimized for applications that require very high dynamic range with low power such as sensors on a 4ma to 20ma industrial control loop. the max11212 provides a high-accuracy internal oscillator, which requires no external components. when used with the specified data rates, the internal digital filter provides more than 80db rejection of 50hz or 60hz line noise. the max11212 pro - vides a simple, system-friendly, 2-wire serial interface in the space-saving, 10-pin f max package. power-on reset (por) the max11212 utilizes power-on reset (por) supply- monitoring circuitry on both the digital supply (dvdd) and the analog supply (avdd). the por circuitry ensures proper device default conditions after either a digital or analog power-sequencing event. the max11212 performs a self-calibration operation as part of the startup initialization sequence whenever a digital por is triggered. it is important to have a stable reference voltage available at the refp and refn pins to ensure an accurate calibration cycle. if the reference voltage is not stable during a por event, the part should be calibrated once the reference has stabilized. the part can be programmed for calibration by using 26 sclks as shown in figure 3. the digital por trigger threshold is approximately 1.2v and has 100mv of hysteresis. the analog por trigger threshold is approximately 1.25v and has 100mv of hys - teresis. both por circuits have lowpass filters that pre - vent high-frequency supply glitches from triggering the por. the analog supply (avdd) and the digital supply (dvdd) pins should be bypassed using 0.1 f f capaci - tors placed as close as possible to the package pin. analog inputs the max11212 accepts two analog inputs (ainp and ainn). the modulator input range is bipolar (-v ref to +v ref ). internal oscillator the max11212 incorporates a highly stable internal oscillator that provides the system clock. the system clock runs the internal state machine and is trimmed to 2.4576mhz (max11212a) or 2.2528mhz (max11212b). the internal oscillator clock is divided down to run the digital and analog timing. reference the max11212 provides differential inputs refp and refn for an external reference voltage. connect the external reference directly across refp and refn to obtain the differential reference voltage. the common- mode voltage range for v refp and v refn is between 0 and v avdd . the differential voltage range for refp and refn is 1v to v avdd . digital filter the max11212 contains an on-chip, digital lowpass filter that processes the 1-bit data stream from the modulator using a sinc 4 (sinx/x) 4 response. when the device is operating in single-cycle conversion mode, the filter is reset at the end of the conversion cycle. when operat - ing in continuous conversion latent mode, the filter is not reset. the sinc 4 filter has a -3db frequency equal to 24% of the data rate. serial-digital interface the max11212 communicates through a 2-wire serial interface with a clock input and data output. the output rate is predetermined based on the package option (max11212a at 120sps and max11212b at 13.75sps). 2-wire interface the max11212 is compatible with the 2-wire interface and uses sclk and rdy /dout for serial communica - tions. in this mode, all controls are implemented by tim - ing the high or low phase of the sclk. the 2-wire serial interface only allows for data to be read out through the rdy /dout output. supply the serial clock to sclk to shift the conversion data out. the rdy /dout is used to signal data ready, as well as reading the data out when sclk pulses are applied. rdy /dout is high by default. the max11212 pulls rdy /dout low when data is available at the end of conversion, and stays low until clock pulses are applied at sclk input; on applying the clock pulses at sclk, the rdy /dout outputs the conversion data on every sclk positive edge. to monitor data availability, pull rdy /dout high after reading the 18 bits of data by sup - plying a 25th sclk pulse. the different operational modes using this 2-wire inter - face are described in the following sections. maxim integrated max11212
10 data read following every conversion the max11212 indicates conversion data availabil - ity as well as allows the retrieval of data through the rdy /dout output. the rdy /dout output idles at the value of the last bit read unless a 25th sclk pulse is provided, causing rdy /dout to idle high. rdy /dout is pulled low when the conversion data is available. figure 1 shows the timing diagram for the data read. once a low is detected on rdy /dout, clock pulses at sclk clock out the data. data is shifted out msb first and is in binary twos complement format. once all the data has been shifted out, a 25th sclk is required to pull the rdy /dout output back to the idle high state. see figure 2. if the data is not read before the next conversion data is updated, the old data is lost, as the new data overwrites the old value. data read followed by self-calibration to initiate self-calibration at the end of a data read, provide a 26th sclk pulse. after reading the 16 bits of conversion data, a 25th positive edge on sclk pulls the rdy /dout output back high, indicating end of data read. provide a 26th sclk pulse to initiate a self-calibra - tion routine starting on the falling edge of the 26th sclk. a subsequent falling edge of rdy /dout indicates data availability at the end of calibration. the timing is illus - trated in figure 3. figure 1. timing diagram for data read after conversion figure 2. timing diagram for data read followed by rdy /dout being asserted high using 25th sclk t 5 t 3 1 d17 conversion is done data is available conversion is done data is available d16 0 23 24 t 1 t 4 t 7 t 2 t 6 sclk rdy/dout 1 d17 conversion is done data is available conversion is done data is available d16 0 23 24 25 sclk rdy/dout 25th slk rising edge pulls rdy/dout high maxim integrated 18-bit, single-channel, ultra-low power, delta- sigma adc with 2-wire serial interface max11212
11 18-bit, single-channel, ultra-low power, delta- sigma adc with 2-wire serial interface data read followed by sleep mode the max11212 can be put into sleep mode to save power between conversions. to activate the sleep mode, idle the sclk high any time after the rdy /dout output goes low (that is, after conversion data is available). it is not required to read out all 18 bits before putting the part in sleep mode. sleep mode is activated after the sclk is held high (see figure 4). the rdy /dout output is pulled high once the device enters sleep mode. to come out of sleep mode, pull sclk low. after the sleep mode is deactivated (when the device wakes up), conversion starts again and rdy /dout goes low, indicating the next conversion data is available. see figure 4. single-conversion mode for operating the max11212 in single-conversion mode, activate and deactivate sleep mode between conver - sions as described in the data read followed by sleep mode section). single-conversion mode reduces power consumption by shutting down the device when idle between conversions. see figure 4. single-conversion mode with figure 3. timing diagram for data read followed by two extra clock cycles for self-calibration figure 4. timing diagram for data read followed by sleep mode activation; single-conversion timing 1 d17 conversion is done data is available conversion is done data is available after calibratio n calibration starts on 26th sclk t 8 d16 0 23 24 12 25 26 d17 d16 sclk rdy/dout 25th sclk pulls rdy/dout high sleep mode 12 12 3 24 conversion is done data is available t 9 t 11 t 10 device enters sleep mode device exits out sleep mode 0 rdy/dout d17 d16 d17 d16 sclk conversion is done data is available maxim integrated max11212
12 self-calibration at wake-up the max11212 can be put in self-calibration mode immediately after wake-up from sleep mode. self- calibration at wake-up helps to compensate for tempera - ture or supply changes if the device is shut down for extensive periods. to automatically start self-calibration at the end of sleep mode, all the data bits must be shift - ed out followed by 25th sclk edge to pull rdy /dout high, and then on the 26th sclk keep it high for as long as shutdown is desired. once sclk is pulled back low, the device automatically performs a self-calibration and, when the data is ready, the rdy /dout output goes low. see figure 5. this also achieves the purpose of single conversions with self-calibration. figure 5. timing diagram for sleep mode activation followed by self-calibration at wake-up sleep mode 12 12 3 24 25 26 conversion is done data is available t 12 t 10 device enters sleep mode device exits out sleep mode and starts calibration 0 rdy/dout d17 d16 d17 d16 sclk conversion is done data is available after calibration 25th sclk pulls rdy/dout high maxim integrated 18-bit, single-channel, ultra-low power, delta- sigma adc with 2-wire serial interface max11212
13 18-bit, single-channel, ultra-low power, delta- sigma adc with 2-wire serial interface applications information see figure 6 for the rtd temperature measurement circuit and figure 7 for a resistive bridge measurement circuit. figure 6. rtd temperature measurement circuit figure 7. resistive bridge measurement circuit chip information process: bicmos package information for the latest package outline information and land patterns, go to www.maximintegrated.com/packages . note that a +, #, or - in the package code indicates rohs status only. package drawings may show a different suffix character, but the drawing pertains to the package regardless of rohs status. refp refn r ref r rtd ainp ainn gnd max11212 i ref2 i ref1 i ref1 = k x i ref2 refp avdd refn ainp ainn max11212 package type package code document no. 10 max u10+2 21-0061 maxim integrated max11212
18-bit, single-channel, ultra-low power, delta- sigma adc with 2-wire serial interface maxim integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a maxim integrated product. no circuit patent licenses are implied. maxim integrated reserves the right to change the circuitry and specifications without notice at any time. the parametric values (min and max limits) shown in the electrical characteristics table are guaranteed. other parametric values quoted in this data sheet are provided for guidance. 14 maxim integrated 160 rio robles, san jose, ca 95134 usa 1-408-601-1000 ? 2010 maxim integrated products, inc. maxim integrated and the maxim integrated logo are trademarks of maxim integrated products, inc. revision history revision number revision date description pages changed 0 4/10 initial release max11212


▲Up To Search▲   

 
Price & Availability of MAX11203

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X