spec no: dsal3639 rev no: v.2a date: jan/23/2015 page: 1 of 9 approved: wynec checked: allen liu drawn: q.m.chen erp : 1203012075 3.0x2.5mm surface mount led lamp attention observe precautions for handling electrostatic discharge sensitive devices part number: apb3025surkqwdf-amt hyper red white descriptions ? the hyper red source color devices are made with al gainp on gaas substrate light emitting diode. ? the source color devices are made with ingan light emitting diode. ? electrostatic discharge and power surge coul d damage the leds. ? it is recommended to use a wrist band or anti- electrostatic gl ove when handling the leds. ? all devices, equipments and machineries must be electrically grounded. package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.2(0.008") unless otherwise noted. 3. the specifications, characteristics and technical data descri bed in the datasheet are subject to change without prior notice . 4. the device has a single mounting surface. the devi ce must be mounted according to the specifications. applications ? traffic signaling. ? backlighting (illuminated advertising , general lighting). ? interior and exterior automotive lighting. ? substitution of micro incandescent lamps. ? reading lamps. ? signal and symbol luminaire for orientation. ? marker lights (e.g. steps, exit ways, etc). ? decorative and entertainment lighting. ? indoor and outdoor commercial and residential architectural lighting. features ? high reliability led package. ? 3.0mmx2.5mm smt led, 1.1mm thickness. ? bi-color,low power consumption. ? wide viewing angle. ? ideal for backlight and indicator. ? package : 2000pcs / reel. ? moisture sensitivity level : level 3. ? rohs compliant.
spec no: dsal3639 rev no: v.2a date: jan/23/2015 page: 2 of 9 approved: wynec checked: allen liu drawn: q.m.chen erp : 1203012075 selection guide notes: 1. 1/2 is the angle from optical centerline where the lumi nous intensity is 1/2 of the optical peak value. 2.luminous intensity/ luminous flux: +/-15%. *luminous intensity value is traceable to the cie127-2007 compliant national standards. part no. dice lens type iv (mcd) [2] @ 20ma v iewing angle [1] code. min. max. 2 1/2 apb3025surkqwdf-amt hyper red (algainp) yellow fluorescent n 120 200 120 p 200 300 q 300 400 *p *200 *300 *q *300 *400 *r *400 *500 white (ingan) r 400 500 q 300 400 p 200 300 *g *40 *55 *h *55 *80 *m *80 *120 absolute maximum ratings at ta=25c note: 1.1/10 duty cycle, 0.1ms pulse width. 2.rth(max) is based on statistic values. parameter symbol value unit hyper red white power dissipation p d 75 80 mw operating temperature top -40 to+ 100 c storage temperature tstg c junction temperature t j 115 115 c dc forward current (ta=25c) i f 30 20 ma peak forward current [1] (ta=25c) i fm 185 150 ma reverse voltage (ta=25c) v r 5 5 v electrostatic dischar ge threshold (hbm) 3000 250 v -40 to+ 110 thermal resistance 1 chip on (typ.) ( junction/ambient ) 2 chip on (typ.) 590 700 550 670 c/w r th j-a r th j-a
spec no: dsal3639 rev no: v.2a date: jan/23/2015 page: 3 of 9 approved: wynec checked: allen liu drawn: q.m.chen erp : 1203012075 electrical / optical characte ristics at ta=25c (red) parameter symbol value unit min. typ. max. wavelength at peak emission i f =20ma ? peak 645 nm dominant wavelength i f =20ma ?? dom [1] 620 640 nm spectral bandwidth at 50% ? rel max i f =20ma ?? 28 nm forward voltage i f =20ma v f [2] 1.95 2.5 v reverse current (v r = 5v) i r 10 ua temperature coefficient of ? peak i f =20ma, -10 ? c t 100 ? c tc ? peak 0.12 nm/ ? c temperature coefficient of ? dom i f =20ma, -10 ? c t 100 ? c tc ? dom 0.06 nm/ ? c temperature coefficient of v f i f =20ma, -10 ? c t 100 ? c tc v -2.5 mv/ ? c notes: 1.the dominant wavelength ( ?? d) above is the setup value of the sorting machine. ( tolerance ?? d : 1nm. ) 2.forward voltage: +/-0.1v. 3.wavelength value is traceable to the cie127-2007 compliant national standards. 4.excess driving current and/or operating temperature higher t han recommended conditions may result in severe light degradation or premature failure. electrical / optical characteristics at ta=25c (white) parameter symbol value unit chromaticity coordinate x acc.to cie1931 i f =20ma [typ.] x [1] 0.31 chromaticity coordinate y acc.to cie1931 i f =20ma [typ.] y [1] 0.31 forward voltage i f =20ma [min.] v f [2] - v forward voltage i f =20ma [typ.] 3.3 forward voltage i f =20ma [max.] 4.0 temperature coefficient of v f i f =20ma, -10 ? c t 100 ? c [typ.] tc v -2.0 mv/ ? c temperature coefficient of x i f =20ma, -10 ? c t 100 ? c [typ.] tc x -0.18 10 -3 / ? c temperature coefficient of y i f =20ma, -10 ? c t 100 ? c [typ.] tc y -0.20 10 -3 / ? c reverse current (v r = 5v) [max.] i r 50 ua notes: 1.measurement tolerance of the chro maticity coordinates is 0.01. 2.forward voltage: +/-0.1v. 3.excess driving current and/or operating temperature higher t han recommended conditions may result in severe light degradation or premature failure.
spec no: dsal3639 rev no: v.2a date: jan/23/2015 page: 4 of 9 approved: wynec checked: allen liu drawn: q.m.chen erp : 1203012075 apb3025surkqwdf-amt hyper red
spec no: dsal3639 rev no: v.2a date: jan/23/2015 page: 5 of 9 approved: wynec checked: allen liu drawn: q.m.chen erp : 1203012075 white
spec no: dsal3639 rev no: v.2a date: jan/23/2015 page: 6 of 9 approved: wynec checked: allen liu drawn: q.m.chen erp : 1203012075 apb3025surkqwdf-amt white cie 0.20 0.25 0.30 0.35 0.40 0.20 0.25 0.30 0.35 0.40 x y a2 a0 b1 b2 c0 x y x y x y a2 0.263 0.213 a0 0.282 0.245 b2 0.298 0.271 0.282 0.245 0.298 0.271 0.313 0.296 0.265 0.265 0.286 0.299 0.306 0.332 0.242 0.226 0.265 0.265 0.286 0.299 b1 0.313 0.296 c0 0.329 0.325 0.329 0.325 0.358 0.372 0.329 0.371 0.363 0.400 0.306 0.332 0.329 0.371 notes: shipment may contain more than one chromaticity regions. orders for single chromaticity region are generally not accepted. measurement tolerance of the chro maticity coordinates is 0.01.
spec no: dsal3639 rev no: v.2a date: jan/23/2015 page: 7 of 9 approved: wynec checked: allen liu drawn: q.m.chen erp : 1203012075 apb3025surkqwdf-amt reflow soldering is recommended and the soldering profile is shown below. other soldering methods are not recommended as they might cause damage to the product. recommended soldering pattern (units : mm; tolerance: 0.1) tape dimensions (units : mm) reel dimension
spec no: dsal3639 rev no: v.2a date: jan/23/2015 page: 8 of 9 approved: wynec checked: allen liu drawn: q.m.chen erp : 1203012075 terms and conditions for the usage of this document 1. the information included in this docum ent reflects representative usage scenarios and is intended for technical reference on ly. 2. the part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. before production usage customer should refer to the latest datasheet for the updated specifications. 3. when using the products referenced in this document, please make sure the produc t is being operated within the environmental and electrical limits specified in the datas heet. if customer usage exceeds the specified limits, kingbright will not be resp onsible for any subsequent issues. 4. the information in this document applies to typical usage in consumer electronics applicati ons. if customer's application ha s special reliability requirements or have life-threatening liabilitie s, such as automotive or m edical usage, please consult with kingbright representative for further assistance. 5. the contents and information of this document may not be reproduced or re-transmitted without permission by kingbright. 6. all design applications should refer to kingbright application notes available at http://www.kingbrightusa.com/applicationnotes packing & label specifications apb3025surkqwdf-amt
spec no: dsal3639 rev no: v.2a date: jan/23/2015 page: 9 of 9 approved: wynec checked: allen liu drawn: q.m.chen erp : 1203012075 reliability test items and conditions the reliability of products shall be sa tisfied with items listed below lot tolerance percent defective (ltpd) : 10% no. test item standards test condition test times / cycles number of damaged 1 continuous operating test - ta =25c ,if = maximum rated current* 1,000 h 0 / 22 2 high temp. operating test eiaj ed- 4701/100(101) ta = 100c if =derated current at 100c 1,000 h 0 / 22 3 low temp. operating test - ta = -40c, if = maximum rated current* 1,000 h 0 / 22 4 high temp. storage test eiaj ed- 4701/100(201) ta = maximum rated storage temperature 1,000 h 0 / 22 5 low temp. storage test eiaj ed- 4701/100(202) ta = -40c 1,000 h 0 / 22 6 high temp. & humidity storage test eiaj ed- 4701/100(103) ta = 60c, rh = 90% 1,000 h 0 / 22 7 high temp. & humidity operating test eiaj ed- 4701/100(102) ta = 60c, rh = 90% if = derated current at 60c 1,000 h 0 / 22 8 resistance to soldering heat eiaj ed- 4701/100(301) tsld=2605c, 10 sec 2 times 0 / 18 9 thermal shock operating test - ta = -40c(15min) ~ 100c(15min) if = derated current at 100c 1,000 cycles 0 / 22 10 thermal shock test - ta = -40c(15min) ~ 100c(15min) 1,000 cycles 0 / 22 11 electric static discharge (esd) eiaj ed- 4701/100(304) c = 100pf , r2 = 1.5k ? v=3000v(green) v = 250v(white) once each polarity 0 / 22 12 vibration test - a = 196m/s2 , f = 100~2khz , t = 48min for all xyz axes 4 times 0 / 22 * : refer to forward current vs. derating curve diagram items symbols conditions failure criteria luminous intensity lv i f = 20ma testing min. value |
