View B154PW04-V3_7812544.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 ( ) preliminary specifications (v ) final specifications module 15.4? wxga+ color tft-lcd model name b154pw04 v3 dell p/n hw663 customer date checked & approved by date note: this specification is subject to change witho ut notice. approved by date prepared by date nbbu marketing division / au optronics corporation www.datasheet.co.kr datasheet pdf - http://www..net/
2 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 contents 1. handling precautions ............................ .................................. 4 2. general description ............................. ................................... 5 2.1 general specification .......................... ................................................... .............................................5 2.2 optical characteristics ........................ ................................................... .............................................6 3. functional block diagram ................................................... .. 11 4. absolute maxim um ratings......................................... .......... 12 4.1 absolute ratings of tft lcd module ............. ................................................... .............................12 4.2 absolute ratings of backlight unit............. ................................................... ...................................12 4.3 absolute ratings of environment ................ ................................................... ..................................12 5. electrical characteristics ...................... ................................. 13 5.1 tft lcd module................................. ................................................... ..........................................13 5.2 backlight unit ................................. ................................................... ...............................................15 6. signal characteristic ........................... .................................. 18 6.1 pixel format image ............................. ................................................... ...........................................18 6.2 the input data format .......................... ................................................... ...........................................19 6.3 signal description/pin assignment.............. ................................................... ..................................20 6.4 interface timing ............................... ................................................... ..............................................22 6.5 power on/off sequence .......................... ................................................... ..................................24 7. connector description........................... ................................ 25 7.1 tft lcd module................................. ................................................... ..........................................25 8. dynamic test .................................... .................................... 26 8.1 vibration test ................................. ................................................... ................................................26 8.2 shock test spec:............................... ................................................... ..............................................26 9. reliability..................................... ......................................... 27 10. mechanical characteristics..................... ............................. 28 10.1 lcm outline dimension......................... ................................................... .....................................28 10.2 screw hole depth and center position.......... ................................................... ..............................30 11. shipping and package ........................... .............................. 31 11.1 shipping label format ......................... ................................................... ........................................31 11.2 definition of customer ppid label and revision code.............................................. ....................31 11.3 carton package ................................ ................................................... .............................................32 12. appendix: edid description ..................... ........................... 33 www.datasheet.co.kr datasheet pdf - http://www..net/
3 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 record of revision version and date page old description new description remark 0.1 2007/10/26 all first edition for customer 0.2 2007/10/27 27 no back side drawing add back si de drawing 0.3 2007/11/29 16, 30 no led power sequence no 15 years environmentally safety period mark add led power sequence change shipping label format and adds 15 years environmentally safety period mark 0.4 2007/12/10 17 no led driver pull-up resistor a dd led driver pull-up resistor 0.5 2007/12/28 31 1d label change to 2d label 06 2008/1/11 29 orignal position of connector cha nged position of connector 07 2008/4/08 33-36 orignal edid edid for a00 08 2008/4/30 6 chromaticity of color is 0.02 chromaticity of color modify to 0.03 www.datasheet.co.kr datasheet pdf - http://www..net/
4 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 1. handling precautions 1) since front polarizer is easily damaged, pay att ention not to scratch it. 2) be sure to turn off power supply when inserting or disconnecting from input connector. 3) wipe off water drop immediately. long contact wi th water may cause discoloration or spots. 4) when the panel surface is soiled, wipe it with a bsorbent cotton or other soft cloth. 5) since the panel is made of glass, it may break o r crack if dropped or bumped on hard surface. 6) since cmos lsi is used in this module, take care of static electricity and insure human earth when handling. 7) do not open nor modify the module assembly. 8) do not press the reflector sheet at the back of the module to any directions. 9) in case if a module has to be put back into the packing container slot after once it was taken out from the container, do not press the cent er of the led lamp reflector edge. instead, press at the far ends of the led lamp refl ector edge softly. otherwise the tft module may be damaged. 10) at the insertion or removal of the signal inter face connector, be sure not to rotate nor tilt the interface connector of the tft module. 11) after installation of the tft module into an en closure (notebook pc bezel, for example), do not twist nor bend the tft module even momentary. at designing the enclosure, it should be taken into consideration th at no bending/twisting forces are applied to the tft module from outside. otherwise t he tft module may be damaged. 12) small amount of materials having no flammabilit y grade is used in the lcd module. the lcd module should be supplied by power complied wit h requirements of limited power source (iec60950 or ul1950), or be applied exemptio n. 13) the lcd module is designed so that the led in i t is supplied by limited current circuit (iec60950 or ul1950). do not connect the led in haz ardous voltage circuit. www.datasheet.co.kr datasheet pdf - http://www..net/
5 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 2. general description b154pw04 v3 is a color active matrix liquid crystal display composed of a tft lcd panel, a driver circuit, and backlight system. the screen fo rmat is intended to support the wxga+ (1440(h) x 900(v)) screen and 262k colors (rgb 6-bi ts data driver) without backlight inverter. all input signals are lvds interface compatible. b154pw04 v3 is designed for a display unit of noteb ook style personal computer and industrial machine. 2.1 general specification the following items are characteristics summary on the table at 25 condition: items unit specifications screen diagonal [mm] 391 (15.4w?) active area [mm] 331.560 (h) x 207.225 (v) pixels h x v 1440x3(rgb) x 900 pixel pitch [mm] 0.23025x0.23025 pixel format r.g.b. vertical stripe display mode normally white white luminance (i led =19ma) note: i led is lamp current [cd/m 2 ] 300 typ.(5 points average) 270 min.(5 points average) (note1) luminance uniformity 1.25 max. (5 points) 1.53 max. (13 points) contrast ratio 600 typ response time [ms] 16 typ nominal input voltage vdd [volt] +3.3 typ. power consumption [watt] 5.8 max. weight [grams] 460 max. physical size [mm] l w t max 344.5 222.5 6.1 typical 344.0 222.0 - min 343.5 221.5 - electrical interface dual channel lvds surface treatment glare, hardness 3h, www.datasheet.co.kr datasheet pdf - http://www..net/
6 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 support color 262k colors ( rgb 6-bit ) temperature range operating storage (non-operating) [ o c] [ o c] 0 to +50 -25 to +65 rohs compliance rohs compliance 2.2 optical characteristics the optical characteristics are measured under stab le conditions at 25 (room temperature) : item unit conditions min. typ. max. note white luminance i led =19ma [cd/m 2 ] 5 points average 270 300 - 1, 4, 5. [degree] [degree] horizontal (right) cr = 10 (left) 55 55 60 60 - - viewing angle [degree] [degree] vertical (upper) cr = 10 (lower) 45 45 50 55 - - 8 luminance uniformity 5 points - - 1.25 1 luminance uniformity 13 points - - 1.53 2 cr: contrast ratio 500 600 - 6 cross talk % 4 7 [msec] rising - 4 8 [msec] falling - 12 17 response time [msec] rising + falling - 16 25 8 red x 0.570 0.600 0.630 red y 0.315 0.345 0.375 green x 0.290 0.320 0.350 green y 0.525 0.555 0.585 blue x 0.120 0.150 0.180 blue y 0.090 0.120 0.150 white x 0.283 0.313 0.343 chromaticity of color coordinates (cie 1931) white y 0.299 0.329 0.359 2,8 ntsc % cie 1931 - 45 - www.datasheet.co.kr datasheet pdf - http://www..net/
7 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 note 1: 5 points position (ref: active area) 1 2 3 4 5 h /4 h /4 h / 4 h / 4 h w w /4 w /4 w /4 w /4 note 2: 13 points position (ref: active area) w /4 w w /4 h h /4 h /4 h /4 h /4 7 9 1 0 w /4 1 8 w /4 1 0 1 0 1 0 1 0 2 3 1 3 1 2 4 5 6 1 1 note 3: the luminance uniformity of 5 or13 points i s defined by dividing the maximum luminance values by the minimum test point luminance note 4: measurement method w13 = maximum brightness of thirteen points minimum brightness of thirteen points maximum brightness of five points w5 = minimum brightness of five points www.datasheet.co.kr datasheet pdf - http://www..net/
8 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 the lcd module should be stabilized at given temper ature for 30 minutes to avoid abrupt temperature ch ange during measuring. in order to stabilize the luminan ce, the measurement should be executed after lighti ng backlight for 30 minutes in a stable, windless and dark room. note 5 definition of average luminance of white (y l ): measure the luminance of gray level 63 at 5 points y l = [l (1)+ l (2)+ l (3)+ l (4)+ l (5)] / 5 l (x) is corresponding to the luminance of the poin t x at figure in note (1). note 6 definition of contrast ratio: contrast ratio is calculated with the following for mula. note 7 definition of cross talk (ct) ct = | y b ? y a | / y a 100 (%) where y a = luminance of measured location without gray level 0 pattern (cd/m 2 ) center of the screen tft - lcd module 50 cm photo detector lcd panel field=2 contrast ratio (cr)= brightness on the ?white? state brightness on the ?black? state www.datasheet.co.kr datasheet pdf - http://www..net/
9 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 y b = luminance of measured location with gray level 0 pattern (cd/m 2 ) note 8: definition of response time: the output signals of bm-7 or equivalent are measur ed when the input signals are changed from ?black? to ?white? (falling time) and from ?white? to ?black? (rising time), respectively. the response time inte rval between the 10% and 90% of amplitudes. refer to figure as below . s i g n a l ( r e l a t i v e v a l u e ) "black" tr tf "white" "white" 0% 10% 90% 100% www.datasheet.co.kr datasheet pdf - http://www..net/
10 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 note 8. definition of viewing angle viewing angle is the measurement of contrast ratio R 10, at the screen center, over a 180 horizontal an d 180 vertical range (off-normal viewing angles). th e 180 viewing angle range is broken down as follow s; 90 ( ) horizontal left and right and 90 ( ) vertical, high (up) and low (down). the measureme nt direction is typically perpendicular to the display surface with the scree n rotated about its center to develop the desired measurement viewing angle. www.datasheet.co.kr datasheet pdf - http://www..net/
11 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 3. functional block diagram the following diagram shows the functional block of the 15.4 inches wide color tft/lcd module: x -driver backlight unit tft arr ay/cell 1440(r/g/b) x 3 x 900 y-driver vdd lcd controller lcd drive bo ard gnd dc-dc converter ref circuit odd xin0 oddxin1 oddxin2 oddxclkin evenxin0 evenxin1 evenxin2 evenxclkin (8 pairs lvds) jae fi-vhp50s-a-hf11 m ating housing jae fi-vhp50c-a led pow er control signal l cd connector( 50 pin) www.datasheet.co.kr datasheet pdf - http://www..net/
12 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 4. absolute maximum ratings an absolute maximum rating of the module is as foll owing: 4.1 absolute ratings of tft lcd module item symbol min max unit conditions logic/lcd drive voltage vin -0.3 +4.0 [volt] note 1,2 4.2 absolute ratings of backlight unit item symbol min max unit conditions led current iled - 20 [ma] rms note 1,2 4.3 absolute ratings of environment item symbol min max unit conditions operating temperature top 0 +50 [ o c] note 3 operation humidity hop 5 95 [%rh] note 3 storage temperature tst -20 +60 [ o c] note 3 storage humidity hst 5 95 [%rh] note 3 note 1: at ta (25 ) note 2: permanent damage to the device may occur if exceed maximum values note 3: for quality performance, please refer to au o iis (incoming inspection standard) . twb=39c operating range storage range www.datasheet.co.kr datasheet pdf - http://www..net/
13 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 5. electrical characteristics 5.1 tft lcd module 5.1.1 power specification input power specifications are as follows; symble parameter min typ max units note vdd logic/lcd drive voltage 3.0 3.3 3.6 [volt] pdd vdd power - - 2 [watt] note 1/2 idd idd current - 380 562 [ma] note 1/2 i rush inrush current - - 2000 [ma] note 3 vddrp allowable logic/lcd drive ripple voltage - - 100 [mv] p-p note 1 : maximum measurement condition black pattern note 2 typical measurement condition: mosaic pattern note 3 measure condition +5.0v +12.0v vcc r1 47k r2 1k vr1 47k sw1 sw mag-spst 1 2 f1 q3 ao6402 g d2 s d1 d5 d6 c1 1uf/16v q3 ao6402 g d2 s d1 d5 d6 c3 0.01uf/25v c2 1uf/25v (high to low) control signal (lcd module input) 90% 10% vin rising time 0v 3.3v 0.5ms www.datasheet.co.kr datasheet pdf - http://www..net/
14 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 5.1.2 signal electrical characteristics input signals shall be low or high-impedance state when vdd is off. it is recommended to refer the specifications of th c63lvdf84a (thine electronics inc.) in detail. signal electrical characteristics are as follows; parameter condition min max unit vth differential input high threshold (vcm=+1.2v) - 100 [mv] vtl differential input low threshold (vcm=+1.2v) -100 - [mv] vcm differential input common mode voltage 1.1 1.45 [v] note: lvds signal waveform vt h vcm vss www.datasheet.co.kr datasheet pdf - http://www..net/
15 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 5.2 backlight unit the blu system is an edge type light source with le d (light emitting diode) light bar item symbol min typ max units condition fixed input current il t 20 [ma] rms light bar voltage vl 32. 34 [volt] rms light bar power pl 3.7 3.88 wt light bar pin assignment: pin no. pin assignment function 1 vout led anode (positive) 2 vout led anode (positive) 3 vout led anode (positive) 4 nc nc 5 fb6 led cathode (negative) 6 fb5 led cathode (negative) 7 fb4 led cathode (negative) 8 fb3 led cathode (negative) 9 fb2 led cathode (negative) 10 fb1 led cathode (negative) www.datasheet.co.kr datasheet pdf - http://www..net/
16 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 led power sequence valus symbol min typ max unit t1 10 --- --- ms t2 100 --- --- ms t3 10 --- --- ms note: the duty of led dimming signal should be more than 20% in t2.. www.datasheet.co.kr datasheet pdf - http://www..net/
17 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 led driver smbus pull-up resistor smbus pull-up circuitry setting value for pull-up resistor rp ) 10 * 350 /()4.0 ( ) 10 * 100 /()4.0 ( 6 6 ? ? ? ? vdd rp vdd suggestion: if vdd=3.3v, rp=10k ohm; if vdd=5v, rp=15k ohm note: rp is the equivalent resistor for smbus pull- up circuitry www.datasheet.co.kr datasheet pdf - http://www..net/
18 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 6. signal characteristic 6.1 pixel format image following figure shows the relationship of the inpu t signals and lcd pixel format. www.datasheet.co.kr datasheet pdf - http://www..net/
19 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 6.2 the input data format signal name description veedid (3.3v) +3.3v edid power clk eedid edid clock input data eedid edid data input orxin0-, orxin0+ odd lvds differential data input(ored0-ored5, ogree n0) orxin1-, orxin1+ odd lvds differential data input(ogreen1-ogreen5, o blue0-oblue1) orxin2-, orxin2+ odd lvds differential data input(oblue2-oblue5, hsy nc, vsync, de) orxclkin-, orxclkin+ odd lvds differential clock input erxin0-, erxin0+ even lvds differential data input(ered0-ered5, egre en0) erxin1-, erxin1+ even lvds differential data input(egreen1-egreen5, eblue0-eblue1) erxin2-, erxin2+ even lvds differential data input(eblue2-eblue5) erxclkin-, erxclkin+ even lvds differential clock input vdd +3.3v power supply vss ground note: output signals from any system shall be low o r high-impedance state when vdd is off. www.datasheet.co.kr datasheet pdf - http://www..net/
20 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 6.3 signal description/pin assignment lvds is a differential signal technology for lcd in terface and high speed data transfer device. pin# signal name description 1 test loop (only to pin 30) diag. pin for test 2 veedid (3.3v) ddc 3.3vpower 3 vss ground 4 clk eedid ddc clock 5 data eedid ddc data 6 vss ground 7 odd_rin0- odd channel differential data input 8 odd_rin0+ odd channel differential data input 9 vss ground 10 odd_rin1- odd channel differential data input 11 odd_rin1+ odd channel differential data input 12 vss ground 13 odd_rin2- odd channel differential data input 14 odd_rin2+ odd channel differential data input 15 vss ground 16 odd_clkin- odd channel differential clock input 17 odd_clkin+ odd channel differential clock input 18 vss ground 19 even_rin0- even channel differential data input 20 even_rin0+ even channel differential data input 21 vss ground 22 even_rin1- even channel differential data input 23 even_rin1+ even channel differential data input 24 vss ground 25 even_rin2- even channel differential data input 26 even_rin2+ even channel differential data input 27 vss ground 28 even_clkin- even channel differential clock inpu t 29 even_clkin+ even channel differential clock inpu t 30 test loop (only to pin 1) diag. pin for test 31 test loop (only to pin 50) diag. pin for test 32 vdd power supply (+3.3v) 33 vdd power supply (+3.3v) www.datasheet.co.kr datasheet pdf - http://www..net/
21 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 34 test (bist_en) bist function 35 +5v_alw power supply (+5v) 36 vss ground 37 vss ground 38 pwm_bl systwm side pwm input signal for brightne ss control 39 vbl- led power ground 40 vbl- led power ground 41 vbl- led power ground 42 vbl- led power ground 43 nc no connection 44 vbl+ backlight input voltage 45 vbl+ backlight input voltage 46 vbl+ backlight input voltage 47 vbl+ backlight input voltage 48 smb_data smbus interface for sending brightness information 49 smb_clk smbus interface for sending brightness i nformation 50 test loop (only to pin 31) diag. pin for test note1: start from right side www.datasheet.co.kr datasheet pdf - http://www..net/
22 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 6.4 interface timing 6.4.1 timing characteristics basically, interface timings should match the 1440x 900 /60hz manufacturing guide line timing. parameter symbol min. typ. max. unit frame rate - 50 60 - hz clock frequency 1/ t clock - 48.2 60.2 mhz period t v 904 912 2048 active t vd 900 900 900 vertical section blanking t vb 4 12 - t line period t h 760 880 1024 active t hd 720 720 720 horizontal section blanking t hb 40 160 - t clock note : de mode only www.datasheet.co.kr datasheet pdf - http://www..net/
23 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 6.4.2 timing diagram www.datasheet.co.kr datasheet pdf - http://www..net/
24 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 6.5 power on/off sequence vdd power and lamp on/off sequence is as follows. i nterface signals are also shown in the chart. signals from any system shall be hi-z state or low level when vdd is off. power sequence timing value parameter min. typ. max. units t1 0.5 - 10 (ms) t2 5 - 50 (ms) t3 0.5 - 50 (ms) t4 400 - - (ms) t5 200 - - (ms) t6 200 - - (ms) t7 0 - 10 (ms) t4 t3 t2 t5 valid data t1 10% 90% 10% 90% t6 t 7 power supply vdd lvds interface backlight on www.datasheet.co.kr datasheet pdf - http://www..net/
25 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 7. connector description physical interface is described as for the connecto r on module. these connectors are capable of accommodating the f ollowing signals and will be following components. 7.1 tft lcd module connector name / designation for signal connector manufacturer jae or compatible type / part number jae fi-vhp50s-a-hf11 or compatible mating housing/part number jae fi-vhp50c-a or compatible www.datasheet.co.kr datasheet pdf - http://www..net/
26 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 8. dynamic test 8.1 vibration test test condition: acceleration: 1.5 g frequency: 10 - 500hz random sweep: 30 minutes each axis (x, y, z) 8.2 shock test spec: test condition: acceleration: 220 g , half sine wave active time: 2 ms pulse: +/-x,+/-y,+/-z , one time for each side remark: 1. ambient condition is 25 + 5 , relative humidity : 40% ~ 70% 2. non-packaged and non-operation www.datasheet.co.kr datasheet pdf - http://www..net/
27 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 9. reliability items required condition note temperature humidity bias ta= 40 , 95%rh, 300h high temperature operation ta= 50 , dry, 300h low temperature operation ta= 0 , 300h high temperature storage ta= 65 , 35%rh, 300h low temperature storage ta= -25 , 50%rh, 300h thermal shock test ta=-40 to 65 , duration at 30 min, 100 cycles esd contact : 8 kv air : 15 kv note 1 note1: according to en 61000-4-2 , esd class b: some perf ormance degradation allowed. no data lost . self-recoverable. no hardware failures. remark: mtbf (excluding the led): 30,000 hours with a conf idence level 90% www.datasheet.co.kr datasheet pdf - http://www..net/
28 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 10. mechanical characteristics 10.1 lcm outline dimension ] ] ] ] [by1]: get from rd- must paste the pdf format. www.datasheet.co.kr datasheet pdf - http://www..net/
29 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 www.datasheet.co.kr datasheet pdf - http://www..net/
30 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 10.2 screw hole depth and center position screw hole minimum depth, from side surface = 2.3 m m (ref. drawing) screw hole center location, from front surface = 3. 7 0.2mm (ref. drawing) screw torque: maximum 2.5 kgf-cm www.datasheet.co.kr datasheet pdf - http://www..net/
31 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 11. shipping and package 11.1 shipping label format 11.2 definition of customer ppid label and revision code please refer to the dell part identification label specification, number:13190 build name(s): ppid revision code(s): sub system test (sst) working sample (ws) eng 2 x00, x01, x02, ?, x0n product test (pt) engineering sample (es) eng 3 x10, x11, x12, ?, x1n system test (st) customer sample (cs) eng 4 x20, x21, x22, ? x2n x-build (xb) mass production (mp) eng 5 a00, a01, a02, ? a0n h/w: 3 a f/w:1 manufactured 08/02 model no: b154pw04 v3 au optronics 3axxg made in china (s1) made in cn dp/n 0hw663 cn - 0hw663 -72090- 932 - 0123 - a00 23m www.datasheet.co.kr datasheet pdf - http://www..net/
32 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 11.3 carton package the outside dimension of carton is 455 (l)mm x 380 (w)mm x 355 (h)mm 11.3 shipping package of palletizing sequence www.datasheet.co.kr datasheet pdf - http://www..net/
33 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 12. appendix: edid description byte value value value (hex) field name and comments (hex) (binary) (dec) 0 header 00 00000000 1 header ff 11111111 2 header ff 11111111 3 header ff 11111111 4 header ff 11111111 5 header ff 11111111 6 header ff 11111111 7 header 00 00000000 8 eisa manufacture code = 3 character id 06 00000110 9 eisa manufacture code (compressed ascii) af 10101111 0a panel supplier reserved ? product code 77 01110111 0b panel supplier reserved ? product code 43 01000011 0c lcd module serial no - preferred but optional ( ?0? if not used) 00 00000000 0d lcd module serial no - preferred but optional (?0? if not used) 00 00000000 0e lcd module serial no - preferred but optional ( ?0? if not used) 00 00000000 0f lcd module serial no - preferred but optional (?0? if not used) 00 00000000 10 week of manufacture 01 00000001 11 year of manufacture 11 00010001 12 edid structure version # = 1 01 00000001 13 edid revision # = 3 03 00000011 14 video i/p definition = digital i/p (80h) 90 10010000 15 max h image size = (rounded to cm) 21 00100001 16 max v image size = (rounded to cm) 15 00010101 17 display gamma = (gamma 100)-100 = example: ( 2. 2100 ) ? 100 = 120 78 01111000 18 feature support ( no dpms, active off, rgb, timi ng blk 1) 0a 00001010 19 red/green low bit (rxry/gxgy) 90 10010000 1a blue/white low bit (bxby/wxwy) b5 10110101 1b red x rx = 0.6 99 10011001 1c red y ry = 0.345 58 01011000 1d green x gx = 0.32 52 01010010 1e green y gy = 0.555 8e 10001110 1f blue x bx = 0.15 26 00100110 20 blue y by = 0.12 1e 00011110 21 white x wx = 0.313 50 01010000 22 white y wy = 0.329 54 01010100 www.datasheet.co.kr datasheet pdf - http://www..net/
34 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 23 established timings 1 (00h if not used) 00 00000000 24 established timings 2 (00h if not used) 00 00000000 25 manufacturer?s timings (00h if not used) 00 00000000 26 standard timing id1 (01h if not used) 01 00000001 27 standard timing id1 (01h if not used) 01 00000001 28 standard timing id2 (01h if not used) 01 00000001 29 standard timing id2 (01h if not used) 01 00000001 2a standard timing id3 (01h if not used) 01 00000001 2b standard timing id3 (01h if not used) 01 00000001 2c standard timing id4 (01h if not used) 01 00000001 2d standard timing id4 (01h if not used) 01 00000001 2e standard timing id5 (01h if not used) 01 00000001 2f standard timing id5 (01h if not used) 01 00000001 30 standard timing id6 (01h if not used) 01 00000001 31 standard timing id6 (01h if not used) 01 00000001 32 standard timing id7 (01h if not used) 01 00000001 33 standard timing id7 (01h if not used) 01 00000001 34 standard timing id8 (01h if not used) 01 00000001 35 standard timing id8 (01h if not used) 01 00000001 36 pixel clock/10,000 = 96310000 /10000 (lsb) 32 00110010 37 pixel clock/10,000 = 96310000 /10000 (msb) 2a 00101010 38 horizontal active = 1440 pixels (lower 8 bits) a0 10100000 39 horizontal blanking (thbp) = 320 pixels (lower 8 bits) 16 00010110 3a horizontal active/horizontal blanking (thbp) (upper4:4 bits) 52 01010010 3b vertical active = 900 lines 84 10000100 3c vertical blanking (tvbp) = 12 lines (de blanking t yp. for de only panels) 0c 00001100 3d vertical active : vertical blanking (tvbp) (upper4:4 bits) 30 00110000 3e horizontal sync, offset (thfp) = 64 pixels 40 01000000 3f horizontal sync, pulse width = 32 pixels 20 00100000 40 vertical sync, offset (tvfp) = 3 lines sync width = 3 lines 33 00110011 41 horizontal vertical sync offset/width upper 2 bits 00 00000000 42 horizontal image size = 331.2 mm 4b 01001011 43 vertical image size = 207 mm cf 11001111 44 horizontal image size / vertical image size 10 00010000 45 horizontal border = 0 (zero for notebook lcd) 00 00000000 46 vertical border = 0 (zero for notebook lcd ) 00 00000000 47 if display uses standard blanking (hsyncpolarity = pos, vsyncpolarity = neg) , for dvd compliance. 1a 00011010 www.datasheet.co.kr datasheet pdf - http://www..net/
35 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 48 pixel clock/10,000 = 96310000 /10000 (lsb) 32 00110010 49 pixel clock/10,000 = 96310000 /10000 (msb) 2a 00101010 4a horizontal active = 1440 pixels (lower 8 bits) a0 10100000 4b horizontal blanking (thbp) = 320 pixels (lower 8 bits) 16 00010110 4c horizontal active/horizontal blanking (thbp) (upper4:4 bits) 52 01010010 4d vertical active = 900 lines 84 10000100 4e vertical blanking (tvbp) = 12 lines (de blanking t yp. for de only panels) 0c 00001100 4f vertical active : vertical blanking (tvbp) (upper4:4 bits) 30 00110000 50 horizontal sync, offset (thfp) = 64 pixels 40 01000000 51 horizontal sync, pulse width = 32 pixels 20 00100000 52 vertical sync, offset (tvfp) = 3 lines sync width = 3 lines 33 00110011 53 horizontal vertical sync offset/width upper 2 bits 00 00000000 54 horizontal image size = 331.2 mm 4b 01001011 55 vertical image size = 207 mm cf 11001111 56 horizontal image size / vertical image size 10 00010000 57 horizontal border = 0 (zero for notebook lcd) 00 00000000 58 vertical border = 0 (zero for notebook lcd ) 00 00000000 59 if display uses standard blanking (hsyncpolarity = pos, vsyncpolarity = neg) , for dvd compliance. 1a 00011010 5a flag 00 00000000 5b flag 00 00000000 5c flag 00 00000000 5d dummy descriptor fe 11111110 5e flag 00 00000000 5f dell p/n 1 st character 48 01001000 60 dell p/n 2 nd character 57 01010111 61 dell p/n 3 rd character 36 00110110 62 dell p/n 4 th character 36 00110110 63 dell p/n 5 th character 33 00110011 64 eedid revision = a00 (x build and mp) 80 10000000 65 manufacturer p/n 42 01000010 66 manufacturer p/n 31 00110001 67 manufacturer p/n 35 00110101 68 manufacturer p/n 34 00110100 69 manufacturer p/n 50 01010000 6a manufacturer p/n 57 01010111 6b manufacturer p/n (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 34 00110100 6c flag 00 00000000 www.datasheet.co.kr datasheet pdf - http://www..net/
36 of 36 au optronics corporation product specification auo nbbu spec. template 1.0 6d flag 00 00000000 6e flag 00 00000000 6f data type tag: 00 00000000 70 flag 00 00000000 71 smbus value = xx nits 00 00000000 72 smbus value = xx nits 00 00000000 73 smbus value = xx nits 00 00000000 74 smbus value = xx nits 00 00000000 75 smbus value = xx nits 00 00000000 76 smbus value = xxx nits 00 00000000 77 smbus value = xxx nits 00 00000000 78 smbus value = max nits (typically = 00h, xxx n its) 00 00000000 79 bit[1:0] 00: reserved, 01: single lvds, 10: dual l vds, 11: reserved bit[2] 0: no rtc support, 1: rtc support bit[7:3] reserved 02 00000010 7a bit[0] 0: no bist support, 1: bist support bit[7:1] reserved 01 00000001 7b (if <13 char, then terminate with ascii code 0ah, s et remaining char = 20h) 0a 00001010 7c (if <13 char, then terminate with ascii code 0ah, s et remaining char = 20h) 20 00100000 7d (if <13 char, then terminate with ascii code 0ah, s et remaining char = 20h) 20 00100000 7e extension flag (# of optional 128 edid extension b locks to follow, typ = 0) 00 00000000 7f checksum (the 1-byte sum of all 128 bytes in this edid block shall = 0) 75 01110101 www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of B154PW04-V3

	To Download B154PW04-V3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .