lambdadriver ? optical amplif er modules are a family of low-noise erbium-doped fiber amplif ers (edfa) ideal for metro and long-haul dense wavelength division multiplexing (dwdm) as well as single wavelength applications. the optical design, coupled with sophisticated control circuitry, allows these optical amplif ers to provide constant gain even with wavelengths being added or dropped in the network. any f uctuations caused by wavelengths addition/ removal can be handled by its ultra-fast transient suppression. when paired with the lambdadriver ? element management module , full monitoring and conf guration capabilities are supported with a local rs-232 interface and ethernet/fast ethernet interfaces for remote network monitoring using telnet and snmp. using mrvs megavision web ? nms provides remote control reducing the costly need for many inf eld service calls. the modules allow monitoring of input and output power levels (real dbm values), temperature and signal gain. the modules can be operated in two modes: automatic gain control or automatic power control. these operating modes and their respective parameter settings are factory pre-conf gured but can be changed by mrv authorized personnel. in agc mode, the module maintains constant gain for each channel according to the gain parameter setting, as long as the total output power does not exceed the maximum rated value (+22 dbm). this mode is factory pre-conf gured. lambdadriver ? - optical amplif er module (em800-oax/em1600-oax) booster, in line and pre-amplif er up to 22dbm maximum output power protocol and bandwidth transparent gain f atness (with gff) less than 1.0 db low noise f gure optical power monitoring front panel status leds fast transient suppression time automatic laser shutdown (als) mid-stage connection dwdm networks single-channel amplif cation distance extention applications ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? long haul application optical amplif er modules features wdm & optical transport not sure what solution best f ts your needs? visit www.mrv.com or e-mail us at sales@mrv.com datasheet
in apc mode, the module maintains the output total power constant at the pre-def ned output power settings. additionaly each oa module with m in part number includes a special mid-stage port for optical dispersion compensator. there are 3 types of oas: booster, in-line and pre- amplif er. the main difference between these modules is the input power level that dictates the application of the specif c module and the gain values. for example, booster is usually used at the beginning of the line and therefore input levels above 0 dbm and gain of 9 to15 db should be expected. on the other hand, pre-amplif er input level is very weak (down to C32 dbm/channel) because it is positioned at the end of the line. multi-channel (dwdm) amplif ers are equipped with gain flattening filters (gff) and provide f at gain response across entire c-band and input power range. for single channel applications gff cost is saved. optical amplif er modules provide automatic power shutdown, when input is below auto-shutdown threshold. power shutdown can be also forced through the management. the compact, 1-slot lambdadriver optical amplif er modules install into any of the lambdadriver ? chassis. most of the standard edfa units have maximum +18dbm total output power. special high power edfa modules have maximum +22dbm total output power that mainly serve high wavelength count (more than 32 waves) dwdm or ultra long single span applications. these high power units are double slot size. each module provides visual indications of the front panel and can be operated without management as plug and play edfa. besides dwdm networks application, lambdadriver ? edfas can be used in any single channel application thus providing f exible means of extending an optical link by compensating for optical budget loss. operating temperature -5 o c - 45 o c (23 o f to 113 o f) storage temperature -10 o c - 70 o c (50 o f to 158 o f) relative humidity 85% maximum, non-condensing dimensions (w x h x d) em800 + 18dbm t ype em1600 + 18dbm t ype em800 high power em1600 high p ower 26.93 mm (1.06 in) x 130.7 mm (5.145 in) x 227 mm (8.956 in) (1 slot wide) 26.93 mm (1.06 in) x 263.4 mm (10.37 in) x 227 mm (8.956 in) (1 slot wide) 54.18 mm (2.13 in) x 130.7 mm (5.14 in) x 227 mm (8.956 in) (2 slot wide) 54.18 mm (2.13 in) x 263.4 mm (10.37 in) x 227 mm (8.956 in) (2 slot wide) weight: em800 + 18dbm type em1600 + 18dbm t ype em800 high power em1600 high p ower 0.586 kg (1.28lb) 0.865 kg (2.11lb) 1.016 kg (2.24lb) 1.305 kg (2.47lb) connectors - all - high power ouput sc e2000apc environment specif cations wdm & optical transport
parameter value units minimum typical typical maximum wavelength range 1528 1563 nm output power booster & in-line with mid-stage soab13, soai & pre-amplif er with mid-stage so ab13, so ai & p r e-a mplif er with mid-stage high power booster soab13, soai & pre-amplif er high p o w er b o ost er soab13, soai & pre-amplif er high power in-line high power booster high p o w er in-line high power booster +18 +17 +13 +22 +21 dbm input power booster in-line 25db gain in-line pre-amplif er 25db gain in-line p r e-a mplif er 25db gain in-line high power booster pre-amplif er high p o w er b o ost er pre-amplif er high power in-line high power booster high p o w er in-line high power booster 25db gain high power in-line 25db gain high power in-line high power in-line 25db gain high p o w er in-line high power in-line -15 -25 -25 -30 -11 -22 -27 9 -3 -8 -7 14 3 -2 dbm signal gain * booster in-line pre-amp pre-amp 9 or 15 20 or 25 10 or 20 db noise figure at rated gain booster booster with mid-tage in-line in-line with mid-tage pre-amplif er in-line with mid-tage p r e-a mplif er in-line with mid-tage high power booster pre-amplif er high p o w er b o ost er pre-amplif er high power booster with mid-tage high power booster high p o w er b o ost er with mid-tage high power booster high power in-line high power booster with mid-tage high p o w er in-line high power booster with mid-tage high power in-line with mid-tage high power in-line with mid-tage high power in-line high p o w er in-line with mid-tage high power in-line 7,5 9 6 6 5.5 8 11.5 6 7 db input dynamic range 25 db input/output isolation (min) 30 db gain flatness at specif ed gain with gff +/-0.5 +/-1.0 db optical return loss (at input and output ports) 25 db polarization mode dispersion 0.3 0.5 db polariziation dependent gain +/-0.2 +/-0.5 db transient overshoot (10 db drop) 0.5 1.0 db transient suppression time (10 db drop) < 32 s s management leds wdm transmission laser status, temperature status, port reception status, port transmission status port reception status, port transmission status monitoring input power, output power, gain, temperature input power, output power, gain, temperature alarm input power, output power, temperature input power, output power, temperature power consumption: 18dbm type power consumption: 18dbm t yp e power consumption: high power high power 18dbm type high p o w er 18dbm type 3.3 w 15 w technical specif cations * model dependent - see ordering information section * m o del dep enden t - see or der ing inf or ma tion sec tion * wdm & optical transport
mrv-ld-oa rev.5 11-09 copyright ?2008 mrv communications, inc. all rights reserved. wdm & optical transport ordering information em800-oaim optical in line amplif er with mid-stage +17dbm output and 20db gain em800-oaim25 optical in line amplif er with mid stage +17dbm output and 25db gain em800-oai optical in line amplif er + 18dbm output and 20db gain em800-oap optical pre-amplif er + 13dbm output and 20db gain em800-oap10 optical pre-amplif er +13 dbm output and 10db gain em800-oab optical booster amplif er + 18dbm output and 9db gain em800-oabm optical booster amplif er with mid-stage +17dbm output and 9db gain em800-soaim single channel optical in line amplif er with mid-stage +13dbm output and 20db gain em800-soai single channel optical in line amplif er output +13dbm output and 20db gain em800-soai25 single channel optical in line amplif er output +17dbm output and 25db gain em800-oai25 optical in line amplif er +18dbm output and 25db gain em800-soap single channel optical pre - amplif er +13dbm output and 20db gain em800-soab single channel optical booster amplif er +18dbm output and 15db gain em800-soab13 single channel optical booster amplif er +13dbm output and 15db gain em1600-oabm optical booster amplif er with mid-stage +17dbm output and 9db gain em1600-oaim optical in line amplif er with mid-stage +17dbm output and 20db gain em1600-oai optical in line amplif er +18 dbm output and 20db gain em1600-oap optical pre-amplif er +13 dbm output and 20db gain em1600-oap10 optical pre-amplif er +13 dbm output and 10db gain em1600-oab optical booster amplif er +18 dbm output and 9db gain em1600-soaim single channel optical in line amplif er with mid-stage + 13dbm output and 20db gain em1600-soai single channel optical in line amplif er + 13dbm output and 20db gain em1600-soap single channel optical pre-amplif er + 13dbm output and 20db gain em1600-soab single channel optical booster amplif er + 18dbm output and 15db gain em1600-soab13 single channel optical booster amplif er + 13dbm output and 15db gain high power edfas em800-oai21p optical in line amplif er with +21dbm output and 20db gain em800-oai21pm optical in line amplif er with mid-stage +21dbm output and 20db gain em800-oai21pm25 optical in line amplif er with mid-stage +21dbm output and 25db gain em800-oab22p optical booster amplif er with +22dbm output and 9db gain em800-oab22pm optical booster with mid-stage+22dbm output and 9db gain em800-soab22p single channel optical booster amplif er +22dbm output and 20db gain em1600-oab22p optical booster amplif er with +22dbm output and 9db gain em1600-oab22pm optical booster amplif er with mid-stage +22dbm output and 9db gain em1600-oai21p optical in line amplif er with +21dbm output and 20db gain em1600-oai21pm optical in line amplif er with mid-stage +21dbm output and 20db gain em1600-soab22p single channel optical booster amplif er + 22dbm output and 20db gain
|
