technical data sheet smb (75 ? ) (bt 43) bulkhead plug 759S603-1V6E3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/11.05/3.1 all dimensions are in mm; tolerances according to iso 2768 m-h interface similar to bt 43 (bs 9210 f0022) documents assembly instruction 759 b panel piercing b 66 material and plating connector parts material plating center contact brass gold, min. 1.27 m, over nickel outer contact brass gold, min. 0.8 m, over nickel body brass gold, min. 0.8 m, over nickel dielectric ptfe crimping ferrule copper nickel, 2.5-5 m
technical data sheet smb (75 ? ) (bt 43) bulkhead plug 759S603-1V6E3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/11.05/3.1 f(ghz) electrical data impedance 75 ? frequency dc to 4 ghz return loss 22 db, dc to 2 ghz 20 db, 2 to 4 ghz insertion loss 0.05 x db insulation resistance 2x10 3 m ? center contact resistance 5 m ? outer contact resistance 2.5 m ? contact current 1 a dc max. test voltage 750 v rms working voltage 200 v rms rf-leakage 70 db up to 1 ghz - limitations are possible due to the used cable type - mechanical data mating cycles 500 center contact captivation 10 n engaging and disengaging force 8 to 63 n environmental data temperature range -40c to +100c climatic class iec 60068-2-1 40/100/21 iec 60068-2-2 iec 60068-2-3 tooling crimping tool 11w150-000 crimp insert 11w155-504 suitable cables tzc 75025, tzc 75024, bt 3002 packing standard 100 pcs in bag weight 7.6 g/pce draft date approved date rev. engineering change number name date inge mhlauer 21/09/04 rong fang 17/11/05 b00 05-0567 inge mhlauer 17/11/05 while the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warran ty on our part and no statement herein shall be construed as recommendation to infrin g e existin g patents. in the effort to improve our products, we reserve the right to ma ke changes judged to be necessary.
|