crystal clock oscillators standard specifications generic part number frequency range fr eque nc y s t ab ilit y ( over all conditions ) o p eratin g conditions o p eratin g tem p erature supply voltage (v dd ) stand-by control voltage(pin#1) absolute max. ratin g s supply voltage storage temperature input current stand-by current *2 out p ut ( -40 to +85 ) symmetry rise and fall times "0" level "1" level load disable delay time enable delay time startup time ssb phase noise (at v dd =+3.3v & 133.0mhz) aging (non operating) reflow condition e.g. 32smo(2.8vd) 24.000 mhz. (2) internal crystal oscillation to be halted (pin#1=v il ). package data 32smo(a) : 100 ppm over -20 to +70 sealing base lid item specifications 32smo 1 32smo(e) : 20 ppm over -20 to +70 32smo(b) : 50 ppm over -20 to +70 -20 to +70 (standard) 32smo(cw) : 30 ppm over -40 to +85 45% to 55% at 1/2v dd level 10 a max. (pin#1=v il ) 3.0 3.5 6.5 5.5 7.0 7.5 8.5 7.0 7.0 8.0 9.0 6.5 200 ns max. 5 ms max. 10 ms max. -135 dbc/hz, typical at 1khz offset 5 ns max. (10%v dd to 90%v dd level) v ol : 10%v dd max. v oh : 90%v dd min. 15 pf max. (cmos) rohs +175 10 for 1 to 2 minutes (preheating) terminal plating gold / nickel (surface) / (under) terminal ceramic seam tungsten (metalized) compliant (pb-free) -160 dbc/hz, typical at 1mhz offset 5 ppm max. at +25 3 for first year 32smo metal (1) final exact part number to be determined with package type , input voltage, frequency stability, operating temperature and frequency. +250 10 for 10 seconds v ih : 70%v dd min. v il : 30%v dd max. 2 133mhz+ 170mhz -0.5v to +4.0v dc -55 to +100 v dd 80mhz+ 0.625mhz+ 100mhz+ 20mhz+ 35mhz+ 50mhz+ +1.8v +2.5v +3.3v 2.5 4.5 6.0 9.5 n.a. 21.0 18.0 8.5 10.5 13.5 10.5 8.0 0.625 mhz to 135.000 mhz 133.000 mhz to 170.000 mhz +1.8v, +2.5v, +3.0v or +3.3v 5% +2.5v, +3.0v or +3.3v 5% -40 to +85 (w=option) 32smo(c) : 30 ppm over -20 to +70 32smo(aw) : 100 ppm over -40 to +85 32smo(bw) : 50 ppm over -40 to +85 32smo(d) : 25 ppm over -20 to +70 32smo(dw) : 25 ppm over -40 to +85 32smo item package 3.2x2.5mm standard smd cloc k (+1.8v, +2.5v, +3.0v or +3.3v fixed models) 1.3 1.0 2.3 1.1 1.1 0.8 1.3 0.01 f 0.1 f tape specifications 32smo 32smo output waveform a 3.5 2.8 8.0 3.5 4.0 1.0 0.3 1.4 178 1000pcs qty/reel b c d f j l m reel dia. test circuit soldering pattern cmos output 1.00.1 (pin#1=open or vih) (max. ma)
|