View L-S115KRKGCT-5A_7920271.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

para light electronics co., ltd. 4f, no.1, lane 93, chien yi road, chung ho city, taipei, taiwan, tel: 886-2-2225-3733 fax: 886-2-2225-4800 e-mail: para@para.com.tw http://www.para.com.tw data sheet part no.: L-S115KRKGCT-5A rev: a / 0 customer?s approval : _______________ dcc : ____________ drawing no. : ds-78-08-0001 date : 2008-01-14 page 1 of 15 para-for-065
surface mount device led part no. : L-S115KRKGCT-5A rev: a / 0 z package outline dimensions c1 c2 c1 c2 a+ c1 c2 a+ a+ b chip a chip notes: 1. a chip: super red; b chip: yellow green. 2. all dimensions are in millimeters. 3. tolerance is ? 0.1mm (.004") unless otherwise noted. z features ? dual color, common anode , side view chip led. ? package in 8mm tape on 7" diameter reels. ? compatible with automatic pick & place equipment. ? compatible with reflow solderi ng and wave soldering processes. ? eia std package. ? i.c. compatible. ? pb free product. ? meet rohs green product. drawing no. : ds-78-08-0001 date : 2008-01-14 page 2 of 15 para-for-068
surface mount device led part no. : L-S115KRKGCT-5A rev: a / 0 z chip materials chip light color dice material lens color a kr: super red b kg: yellow green alingap water clear z absolute maximum ratings(ta=25 ?? ) rating symbol parameter super red yellow green unit p d power dissipation 75 60 mw i pf peak forward current (1/10 duty cycle, 0.1ms pulse width) 80 60 ma i f continuous forward current 30 30 ma - de-rating linear from 25 j 0.25 0.25 ma/ j v r reverse voltage 5 5 v esd electrostatic discharge threshold(hbm) note a 2000 v topr operating temperature range -40 ~ +85 j tstg storage temperature range -40 ~ +85 j note a: hbm: human body model. seller gi ves no other assurances regarding the ability of to withstand esd z electro-optical characteristics(ta=25 ?? ) parameter symbol super red yellow green unit test condition min. 6.3 4.0 luminous intensity typ. iv 20 10 mcd if= 5 ma viewing angle typ. 2 c 1/2 130 deg note 2 peak wavelength typ. f p 637 571 nm measurement @peak dominant wavelength typ. f d 630 570 nm if= 5 ma spectral line half-width typ. gf 17 15 nm typ. 1.8 1.95 forward voltage max. vf 2.3 2.3 v if = 5 ma reverse current max. ir 100 g a vr = 5v drawing no. : ds-78-08-0001 date : 2008-01-14 page 3 of 15 para-for-068
surface mount device led part no. : L-S115KRKGCT-5A rev: a / 0 z bin code list luminous intensity(iv), unit:mcd@5ma super red(a chip) yellow green( b chip) bin code min max bin code min max k 7.1 11.2 j 4.5 7.1 l 11.2 18 k 7.1 11.2 m 18.0 28.0 l 11.2 18 n 28.0 45.0 m 18.0 28.0 tolerance of each bin are ? 15% dominant wavelength (hue),unit: nm@5ma yellow green(b chip) bin code min max ga 567.0 570.0 gb 570.0 573.0 gc 573.0 576.0 tolerance of each bin are ? 1nm notes: 1. luminous intensity is measured with a lig ht sensor and filter combination that proximities the cie eye-response curve. 2. c 1/2 is the off-axis angle at which the lu minous intensity is half the axial luminous intensity. 3. the dominant wavelength f d is derived from the cie chromaticity diagram and represents the single wavelength whic h defines the color of the device. 4. caution in esd : static electricity and surge damages the led. it is recommended use a wrist band or anti-electrostatic glove when handling the led. all devices, equipment and machinery must be properly grounded. 5. major standard testing equipment by ?ins trument system? model : cas140b compact array spectrometer and ?keith ley? source meter model : 2400. drawing no. : ds-78-08-0001 date : 2008-01-14 page 4 of 15 para-for-068
surface mount device led part no. : L-S115KRKGCT-5A rev: a / 0 z super red typical electro-op tical characteristics curve s (25 j ambient temperature unless otherwise noted) fig.7 relative intensity vs.angle relative luminous lntensity normalized of 20ma fig. 4 relative luminous intensity vs.forward current 50 40 30 20 10 forward current if(ma) 1000 100 10 fig.2 forward current vs.forward voltage luminous lntensity(mcd) fig.3 luminous intensity vs.forward current 100 60 80 40 20 0 0 ambient temperature ta( ?? ) fig.6 forward current derating curve 80 100 60 4 0 20 10 0 30 40 50 60 70 -0 -20 1 -60 - 4 0 0.9 0.8 1.0 20 ambient temperature ta( ?? ) fig.5 luminous intensity vs.ambient temperature 80 90 0.6 0.2 0.4 0.3 0.5 0.1 0.7 relative luminous intensity(%) drawing no. : ds-78-08-0001 date : 2008-01-14 page 5 of 15 para-for-068
surface mount device led part no. : L-S115KRKGCT-5A rev: a / 0 z yellow green typical electro- optical characteristics curve s (25 j ambient temperature unless otherwise noted) fig.7 relative intensity vs.angle relative luminous lntensity normalized of 20ma fig. 4 relative luminous intensity vs.forward current 50 40 30 20 10 forward current if(ma) 1000 100 10 fig.2 forward current vs.forward voltage luminous lntensity(mcd) fig.3 luminous intensity vs.forward current 100 60 80 40 20 0 0 ambient temperature ta( ?? ) fig.6 forward current derating curve 80 100 60 4 0 20 10 0 30 40 50 60 70 -0 -20 1 -60 - 4 0 0.9 0.8 1.0 20 ambient temperature ta( ?? ) fig.5 luminous intensity vs.ambient temperature 80 90 0.6 0.2 0.4 0.3 0.5 0.1 0.7 relative luminous intensity(%) drawing no. : ds-78-08-0001 date : 2008-01-14 page 6 of 15 para-for-068
surface mount device led part no. : L-S115KRKGCT-5A rev: a / 0 z label explanation cus. part no: to be denominated. customer: to be denominated. part no: refer to p15 iv --- luminous intensity code vf --- forward voltage code wd --- dominant wavelength code lot no: e l s 6 8 0001 a---e: for series number b---l: local f: foreign c---s:smd d---year e---month f---spec. packing quantity of bag : 3000pcs for 150 ? 170 ? 110 ? 155 ? 115 series 4000pcs for 191 series 5000pcs for 192 series date code o 2006 06 08 g h i g--- ye ar h--- month i --- day drawing no. : ds-78-08-0001 date : 2008-01-14 page 7 of 15 para-for-068 a b c d e f
surface mount device led part no. : L-S115KRKGCT-5A rev: a / 0 z typical electro-optical characteristics curves fig.1 super red relative intensity vs. wavelength fig.1 yellow green relative intensity vs. wavelength fig.2 yellow green relative intensity vs. wavelength z reel dimensions notes: 1. taping quantity : 3000pcs. 2. the tolerances unless mentioned is ? 0.1mm, angle ? 0.5 ?? , unit : mm. drawing no. : ds-78-08-0001 date : 2008-01-14 page 8 of 15 para-for-068
surface mount device led part no. : L-S115KRKGCT-5A rev: a / 0 z package dimensions of tape and reel polarity progressive direction notes : all dimensions are in millimeters. moisture resistant packaging label aluminum moistue-proof bag desiccant label h:\smd\smd\smd \ ? ? .jpg h:\smd\smd\smd \ ? ? .jpg h : \ s m d \ s m d \ s m d \ ? ? . j p g h : \ s m d \ s m d \ s m d \ ? ? . j p g 2 5 5 435 145 2 4 0 2 1 0 label box carton reel notes : one reel in a bag, one bag in a i nner box, ten inner boxes in a carton. unit : mm. drawing no. : ds-78-08-0001 date : 2008-01-14 page 9 of 15 para-for-068
surface mount device led part no. : L-S115KRKGCT-5A rev: a / 0 z cleaning ? if cleaning is required , use the following solutions for less than 1 minute and less than 40 ?? . ? appropriate chemicals: ethyl al cohol and isopro pyl alcohol. ? effect of ultrasonic cleaning on the led resi n body differs depending on such factors as the oscillator output, size of pcb and led mounting method. the use of ultrasonic cleaning should be enforced at proper out put after confirming there is no problem. z suggest soldering pad dimensions 0.80 0.90 0.10 0.90 1.80 4.20 c1 c2 a+ direction of pwb camber and go to reflow furnace drawing no. : ds-78-08-0001 date : 2008-01-14 page 10 of 15 para-for-068
surface mount device led part no. : L-S115KRKGCT-5A rev: a / 0 ?? suggest sn/pb ir reflow soldering profile condition: ?? suggest pb-free ir reflow soldering profile condition: drawing no. : ds-78-08-0001 date : 2008-01-14 page 11 of 15 para-for-068
surface mount device led part no. : L-S115KRKGCT-5A rev: a / 0 z cautions 1.application limitation : the led?s described here are intended to be used for ordinary electronic equipment (such as office equipment, communication equipment and household application).consult para?s sales in advance for information on application in which exceptional quality and reliability are required, particularly when the failure or malfunction of the led?s may dire ctly jeopardize life or heal th (such as airplanes, automobiles, traffic control equipment, life support system and safety devices). 2.storage : before opening the package : the leds should be kept at 5c to 30c or less and 85%rh or less. the leds should be used within a year. after opening the package : the leds should be kept at 5c to 30c or less and 70%rh or less. the leds should be soldered within 168 hours(7 days) af ter opening the package. please avoid rapid transitions in am bient temperature in high humidity environments where condensation may occur. drawing no. : ds-78-08-0001 date : 2008-01-14 page 12 of 15 para-for-068
surface mount device led part no. : L-S115KRKGCT-5A rev: a / 0 3.soldering(standard process) : do not apply any stress to the lead frame during soldering while the led is at high temperature. recommended soldering condition. reflow soldering : pre-heat 120~150c, 120sec. max., peak temper ature : 240c max. solder ing time : 10 sec max. soldering iron : (not recommended) temperature 300c max., soldering time : 3 sec. max.(one time only), power dissipation of iron : 20w max. use sn60 solder of solder with silver content and don?t to touch led lens when soldering. wave soldering : pre-heat 100c max, pre-heat time 60s max, solder wave 260c max, soldering time 5 sec. max. preformed consecutively cooling process is re quired between 1st and 2nd soldering processes. 4. lead-free soldering for reflow soldering : 1 ? pre-heat temp : 150-180 ?? ,120sec.max. 2 ? soldering temp : temperature of soldering pot over 230 ?? ,40sec.max. 3 ? peak temperature : 260 ??? 5sec. 4 ? reflow repetition : 2 times max. 5 ? suggest solder paste formula 93.3 sn/3.1 ag/3.1 bi /0.5 cu for soldering iron (not recommended) : 1 ? iron tip temp : 350 ?? max. 2 ? soldering iron : 30w max. 3 ? soldering time : 3 sec. max. one time. for dip soldering : 1 ? pre-heat temp : 150 ?? max. 120 sec. max. 2 ? bath temp : 265 ?? max. 3 ? dip time : 5 sec. max. 5. drive method circuit model a circuit model b (a)recommended circuit. (b)the difference of brightness be tween led`s could be found due to the vf-if characteristics of led. drawing no. : ds-78-08-0001 date : 2008-01-14 page 13 of 15 para-for-068
surface mount device led part no. : L-S115KRKGCT-5A rev: a / 0 6.reliability test classification test item test condition reference standard operation life ta= under room temperature as per data sheet maximum rating * test time= 1000hrs (-24hrs,+72hrs)*@20ma. mil-std-750d:1026 (1995) mil-std-883d:1005 (1991) jis c 7021:b-1 (1982) high temperature high humidity storage ir-reflow in-board, 2 times ta= 655 ?? ,rh= 90 ?? 95% *test time= 1000hrs2hrs mil-std-202f:103b(1980) jis c 7021:b-11(1982) high temperature storage ta= 1055 ?? test time= 1000hrs (-24hrs,72hrs) mil-std-883d:1008 (1991) jis c 7021:b-10 (1982) endurance test low temperature storage ta= -555 ?? * test time=1000hrs (-24hrs,72h rs) jis c 7021:b-12 (1982) temperature cycling 1055 ?? -555 ?? 10mins 10mins 100 cycles mil-std-202f:107d (1980) mil-std-750d:1051(1995) mil-std-883d:1010 (1991) jis c 7021:a-4(1982) thermal shock ir-reflow in-board, 2 times 1055 ?? -55 ?? 5 ?? 10mins 10mins 100 cycles mil-std-202f:107d(1980) mil-std-750d:1051(1995) mil-std-883d:1011 (1991) solder resistance tsol= 260 5 ?? dwell time= 10 1sec mil-std-202f:210a(1980) mil-std-750d:2031(1995) jis c 7021:a-1(1982) environmental test solder ability tsol= 235 5 j immersion time 20.5 sec immersion rate 252.5 mm/sec coverage ? 95% of the dipped surface mil-std-202f:208d(1980) mil-std-750d:2026(1995) mil-std-883d:2003(1991) iec 68 part 2-20 jis c 7021:a-2(1982) 7.others: the appearance and specifications of the product may be modified for improvement without notice. drawing no. : ds-78-08-0001 date : 2008-01-14 page 14 of 15 para-for-068
surface mount device led part no. : L-S115KRKGCT-5A rev: a / 0 z part no. system : l ? s 115x1x2 x x - x x x x drawing no. : ds-78-08-0001 date : 2008-01-14 page 15 of 15 para-for-068 xxxx : special specification for customer t : taping for 7 inch reel tc : taping for 13 inch reel th : iv half binning tp : wavelength binning lens color c : water clear w : white diffused t : color transparent d : color diffused g : gap 570nm green y : gaasp 585 nm yellow e : gaasp 620 nm orange sr : gaalas 634 nm red kg : alingap 570nm super green ky : alingap 590nm super yellow kf : alingap 605nm super amber kr : alingap 630 nm super red kd : alingap 639 nm deep red lb : ingan 470nm blue lg: ingan 525nm green 0 : single chip 1 / 2 : super thin single chip 5 / 6 : dual chip f : three chip(full color) 150 : 1206 1.1t type 155 : 1210 1.1t type 170 : 0805 0.8t type 191 : 0603 0.6t type 192 : 0603 0.4t type 195 : 0603 0.6t type 110 : 1206 1.0t type 115 : 1206 1.0t t yp e c : top view type s : side view type

▲Up To Search▲

Price & Availability of L-S115KRKGCT-5A

	To Download L-S115KRKGCT-5A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .