15 allied components interna tional 714-665-1 140 www.a lli edcom pon en ts .com rohs revised 1/06/11 *complete part number by inserting ?s? for standard temp. or ?i? for industrial temp. all specifications subject to change without notice. unless otherwise specified all tolerances are: 0.25 in mm mechanical 10/100/1000 base-t ethernet application meets ieee 802.3 & ansi x 3.263 standards impedance: 100ohms transmit open circuit inductance (ocl): 350uh (min) @100khz,0.1vrms with 8ma dc bias always eu rohs/elv compliant, wave solder capable to 265c rj45 jack cavity conforms to fcc rules and regulations part 68, sub part f ganged 1x4 rj45 connector with integrated magnetics, tab down ara506-lj02_ standard operating temp: 0oc to +70oc (see footnote) industrial operating temp: -40oc to +85oc (see footnote) rise time: 2.5 nano-seconds from 10 to 90 percent allied ara506-lj02_ yyww electrical speci?cations @ 25c part number ocl(uh min) @ 100khz, 0.1v turns ratio chip: cable (3%) insertion loss (db max) return loss (db min) with 8ma dc bias 0.5-100mhz 0.5-40mhz 40.1-100mhz ara506-lj02_ 350 1ct:1ct 1.1 18 12-20*log(f/80) electrical speci?cations @ 25c part number emi fingers led (l/r) cross talk (db min) cmrr (db min) 0.5-100mhz hi-pot (vdc) 0.5-40mhz 40.1-100mhz ara506-lj02_ yes no 35 33-20*log(f/50) 30 2250
15 allied components interna tional 714-665-1 140 www.a lli edcom pon en ts .com rohs revised 1/06/11 unless otherwise specified all tolerances are: 0.05 in mm pcb layout schematics ara506-lj02_ ara506-lj02_ notes: 1.r1-r4=75ohms,1/16w,5%resistors. 2.c1=1000pf,2kv decouping capacitor,c2-c5=0.01uf,50v,0603x7r capacitor. ganged 1x4 rj45 connector with integrated magnetics, tab down materials ara506-lj02_ housing: pbt, flammability rating 94v-o. shell: c2680 brass, 0.20mm thick, 50u" min nickel plating. mod jack contacts: phosphor bronze, 0.35mm thick,6u" gold plated. gnd vcc c2 c3 c4 c5
|