telephone +44 (0)1229 582430 fax: +44 (0)1229 585155 email: sales@marl.co.uk website: www.marl.co.uk website: www.marl-leds.com panel indicat or leds - 4.8mm mounting mlq = 20 dimensions in mm (typical) scale 1:1 leds leds 307 series low profile lens styling smoked & water clear lens options flying lead terminations & ac versions available sealed to ip40 supplied complete with mounting hardware part number colour lens voltage current luminous wave viewing operating storage dc dc intensity length angle temp temp vopr lopr lv@20ma l p topr tstg standard intensity 307-303-04 red 2.0* 20 100@10ma 625 307-306-04 orange 2.0* 20 100@10ma 610 307-309-04 yellow 2.1* 20 30@10ma 590 307-312-04 green 2.2* 20 50@10ma 565 307-303-22 red coloured diffused 24 20 100@10ma 625 wide 0 ~+85 0~+85 307-306-22 orange 24 20 100@10ma 610 307-309-22 yellow 24 20 30@10ma 590 307-312-22 green 24 20 50@10ma 565 307-301-04 red 1.9* 20 850 660 307-325-04 yellow 2.1* 20 4400 590 307-324-04 green 3.4* 20 3400 525 307-934-04 blue 3.4* 20 1000 470 307-998-04 white coloured diffused 3.4* 20 2000 wide 0~+85 0~+85 307-301-22 red 24 20 850 660 307-325-22 yellow 24 20 4400 590 307-324-22 green 24 20 3400 525 307-934-22 blue 24 20 1000 470 307-998-22 white 24 20 2000 units vdc ma mcd nm ? ? high intensity * = voltage dc for 20ma product is vf@20ma, not vopr ?= typical emission colour: x=0.31, y=0.32. colour temperature 8000k. intensities (iv) and colour shades of white (x,y co - ordinates) may vary between leds within a batch. please note - this product is also available at 5, 12 and 28vdc. please contact our sales department for further details. ordering information & typical technical characteristics (ta = 25?) mean time between failure = 90,000 hours. luminous intensity figures refer to the unmodified discrete led . standard intensity samples available anode termination indicated by long tag . section 3; pan ind leds for pdf 19/1/00 4:11 pm page 46
|
