the copyright and authority for the interpretation of the products are reserved by mornsun specifications subject to change without notice. FILTER2D-C3-SK a/1-2012 page 1 of 2 FILTER2D-C3-SK anti-interference filter patent protection rohs features selection guide model inductance value (mh rated current (a)(max) dcr(m ) weight (g) FILTER2D-C3-SK 5.3*2 3 180 15 common specifications item operating conditions min. typ. max. unit inductance error range fo=10khz,uo=0.1v -35 -- +35 % pressure resistance value leakage current io=5ma -- -- 2000 vdc storage humidity -- -- 95 % operating temperature -40 -- 105 storage temperature -55 -- 125 soldering temperature resistance of pin solder joints from case 1.5mm for 10 seconds -- -- 300 dimension l*w*h 27.5*19.5*33.0 mm note: all specifications measured at ta=25 c, humidity<75% unless otherwise specified. internal schematic application circuit small footprint low temperature rise applications FILTER2D-C3-SK applies to analog circuits which are noise-sensitive or emc-sensitive occasions. if added a FILTER2D-C3-SK to the module s input, the module s output noise can be reduced substantially and emc level can be improved. mornsun science & technology co.,ltd. address: no. 5, kehui st. 1, kehui development center, science ave., guangzhou science city, luogang district, guangzhou,p.r.china. tel: 86-20-28203030 fax:86-20-38601272 http://www.mornsun-power.com dc/dc converter +vin -vin FILTER2D-C3-SK i mpedance characteristics (reference value) figure 1 impedance vs frequency
the copyright and authority for the interpretation of the products are reserved by mornsun specifications subject to change without notice. FILTER2D-C3-SK a/1-2012 page 2 of 2 outline dimensions notegrid . 2.54*2.54mm mechanical dimensions recommended footprint (bottom view) dotted terminals (front view) note: unit:mm[inch] pin diameter tolerances: 0.10mm [ 0.004inch] general tolerances: 0.25mm [ 0.010inch] (side view) 1 0 . 0 0 [ 0 . 3 9 4 ] 1 9 . 5 0 [ 0 . 7 6 8 ] 27.50 [1.083] 1 2 4 3 1 .00 [0.039] 15.00 [0.591] max 25.00 [0.984] m a x 3 3 . 0 0 [ 1 . 2 9 9 ] 20.00 [0.787] 4 . 0 0 [ 0 . 1 5 7 ] 15.00 [0.591] 3 . 5 0 [ 0 . 1 3 8 ] 2 . 5 0 [ 0 . 0 9 8 ] 1 2 1 4 1 2 4 3 1 .50[0.059]
|