rb521zs-30 diodes rev.c 1/3 schottky barrier diode rb521zs-30 z applications general rectification z features 1) ultra small mold type. gmd2 2) low v f 3) high reliability z construction silicon epitaxial planar z dimensions (unit : mm) z land size figure (unit : mm) z structure z taping specifications (unit : mm) z absolute maximum ratings (ta=25 c) symbol unit v r v io ma i fsm ma tj tstg forward current surge peak 60hz ? 1cyc 500 150 junction temperature storage temperature parameter reverse voltage (dc) average rectified forward current -40 to +150 limits 30 100 z electrical characteristic (ta=25 c) symbol min. typ. max. unit forward voltage v f --0.37v i f =10ma i r --7a v r =10v reverse current parameter conditions gmd2 0.31 0.38 0.23 0.60.05 0.30.05 0.30.03 00.03 0.380.03 0.270.03 0.570.05 0.190.03 d jedec : - rohm : gmd2 jeita : - dot(year week factory)
rb521zs-30 diodes rev.c 2/3 z electrical characteristic curves 10 100 1000 10000 100000 1000000 10000000 100000000 0102030 ta=150 0.1 1 10 100 0 100 200 300 400 500 600 700 ta=150 0 1 2 3 4 5 6 7 8 9 10 10 100 1000 10000 0.001 0.01 0.1 1 10 100 1000 rth(j-a) rth(j-c) 1 10 0 102030 forward voltagevf(mv) vf-if characteristics forward current:if(ma) 0 0.05 0.1 0.15 0 0.05 0.1 0.15 0.2 reverse current:ir(na) reverse voltagevr(v) vr-ir characteristics capacitance between terminals:ct(pf) reverse voltage:vr(v) vr-ct characteristics vf dispersion map forward voltage:vf(mv) reverse current:ir(ua) ir dispersion map capacitance between terminals:ct(pf) ct dispersion map 0 5 10 15 20 25 30 35 40 45 50 ave:7.5pf ta=25 f=1mhz vr=0v n=10pcs ifsm dispersion map peak surge forward current:ifsm(a) peak surge forward current:ifsm(a) number of cycles ifsm-cycle characteristics peak surge forward current:ifsm(a) time:t(ms) ifsm-t characteristics 0 5 10 15 20 25 30 ave:4.10a 8.3ms ifsm 1cyc 0 5 10 11 01 0 0 8.3ms ifsm 1cyc 8.3ms 0 5 10 110100 t ifsm time:t(s) rth-t characteristics transient thaermal impedance:rth (/w) forward power dissipation:pf(w) average rectified forward currentio(a) io-pf characteristics reverse power dissipation:p r (w) reverse voltage:vr(v) vr-p r characteristics ta=125 ta=75 ta=25 ta=-25 f=1mh 0 0.05 0.1 0.15 0.2 0.25 0.3 0.35 0.4 0.45 0.5 0102030 dc d=1/2 sin(?180) 280 290 300 310 320 330 ave:305.7mv ta=25 vf=10ma n=30pcs ta=125 ta=-25 ta=25 ta=75 ta=25 vr=10v n=30pcs ave:1.19ua dc d=1/2 sin(?180) 1ms im=10ma if=50ma 300us time mounted on epoxy board
rb521zs-30 diodes rev.c 3/3 ambient temperature:ta() derating curve (io-ta) average rectified forward current:io(a) average rectified forward current:io(a) case temparature:tc() derating curve (io-tc) 0 0.05 0.1 0.15 0.2 0.25 0.3 0 25 50 75 100 125 150 0 0.05 0.1 0.15 0.2 0.25 0.3 0 255075100125150 sin(?180) dc d=1/2 sin(?180) dc d=1/2 t tj=150 d=t/t t vr io vr=15v 0a 0v t tj=150 d=t/t t vr io vr=15v 0a 0v
notes no technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of rohm co.,ltd. the contents described herein are subject to change without notice. the specifications for the product described in this document are for reference only. upon actual use, therefore, please request that specifications to be separately delivered. application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. rohm co.,ltd. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by rohm co., ltd. is granted to any such buyer. products listed in this document are no antiradiation design. appendix1-rev2.0 thank you for your accessing to rohm product informations. more detail product informations and catalogs are available, please contact your nearest sales office. rohm customer support system the americas / europe / asia / japan contact us : webmaster@ rohm.co. jp www.rohm.com copyright ? 2008 rohm co.,ltd. the products listed in this document are designed to be used with ordinary electronic equipment or de vices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. it is our top priority to supply products with the utmost quality and reliability. however, there is always a chance of failure due to unexpected factors. therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. rohm cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the notes specified in this catalog. 21 saiin mizosaki- cho, ukyo-ku, kyoto 615-8585, japan tel : +81-75-311-2121 fax : +81-75-315-0172 appendix
|
