1 www.pduke.com 2014/08/19 sds03w sdh03w series dc-dc converter 4:1 ultra wide input range up to 3watts features applications ultra small smd and dip package, 0.52 x 0.36x 0.40 inch with regulated no minimum load required continuous short circuit protection 1600vdc input to output isolation and 3000vdc for o ption safety meets ul60950-1, en60950-1, & iec60950-1 ce marked compliant to rohs ii & reach wireless network telecom/datacom industry control system measurement equipment semiconductor equipment 3000vdc isolation 1600vdc isolation remote control ocp scp technical specification all specifications are typical at nominal input, ful l load and 25 otherwise noted input range output voltage output current @full load input current @ no load efficiency maximum capacitor load model number vdc vdc ma ma % f sds(h)03-12s3p3w 4.5 ~ 18 3.3 700 35 76 4700 sds(h)03-12s05w 4.5 ~ 18 5 600 40 80 2530 sds(h)03-12s12w 4.5 ~ 18 12 250 40 83 1220 sds(h)03-12s15w 4.5 ~ 18 15 200 40 84 1000 sds(h)03-12s24w 4.5 ~ 18 24 125 40 82 470 sds(h)03-12d05w 4.5 ~ 18 5 300 40 80 1470 sds(h)03-12d12w 4.5 ~ 18 12 125 40 82 680 sds(h)03-12d15w 4.5 ~ 18 15 100 40 82 470 sds(h)03-24s3p3w 9 ~ 36 3.3 700 20 77 4700 sds(h)03-24s05w 9 ~ 36 5 600 20 80 2530 sds(h)03-24s12w 9 ~ 36 12 250 25 83 1220 sds(h)03-24s15w 9 ~ 36 15 200 25 83 1000 sds(h)03-24s24w 9 ~ 36 24 125 25 82 470 sds(h)03-24d05w 9 ~ 36 5 300 25 80 1470 sds(h)03-24d12w 9 ~ 36 12 125 25 82 680 sds(h)03-24d15w 9 ~ 36 15 100 25 82 470 sds(h)03-48s3p3w 18 ~ 75 3.3 700 12 77 4700 sds(h)03-48s05w 18 ~ 75 5 600 12 80 2530 sds(h)03-48s12w 18 ~ 75 12 250 13 83 1220 sds(h)03-48s15w 18 ~ 75 15 200 14 83 1000 sds(h)03-48s24w 18 ~ 75 24 125 14 82 470 sds(h)03-48d05w 18 ~ 75 5 300 14 80 1470 sds(h)03-48d12w 18 ~ 75 12 125 14 82 680 sds(h)03-48d15w 18 ~ 75 15 100 14 82 470 part number structure sds03 - 24 s 05 w h series name input output output input isolation voltage quantity voltage range option (vdc) (vdc) sds : smd type 12: 4.5~18 s: single 3p3: 3.3 4:1 : 1600vdc isolation sdh : dip type 24: 9~36 05: 5 h: 3000vdc isolation 48: 18~75 12: 12 15: 15 24: 24 d: dual 05: 5 12: 12 15: 15
sds03w sdh03w 2 www.pduke.com 2014/08/19 input specifications parameter conditions min. typ. max. unit operating input voltage range 12vin(nom) 24vin(nom) 48vin(nom) 4.5 9 18 12 24 48 18 36 75 vdc start up time constant resistive load power up remote on/off 5 5 10 10 ms input surge voltage 1 second, max. 12vin(nom) 24vin(nom) 48vin(nom) 25 50 100 vdc input reflected ripple current (1) 12vin(nom) 24vin(nom) 48vin(nom) 20 20 20 map-p input filter capacitor type dc-dc on open or high impedance ctrl pin applied current via 1k dc-dc off 2.0 3.0 4.0 ma remote on/off remote off input current 2.5 ma application circuit dc-dc on dc-dc off output specifications parameter conditions min. typ. max. unit voltage accuracy -1.0 +1.0 % line regulation low line to high line at full load -0.2 +0.2 % no load to full load single dual -1.0 -1.0 +1.0 +1.0 load regulation 10% load to 90% load single dual -0.5 -0.8 +0.5 +0.8 % cross regulation asymmetrical load 25%/100% fl dual -5.0 +5.0 % ripple and noise measured by 20mhz bandwidth 50 mvp-p temperature coefficient -0.02 +0.02 %/ transient response recovery time 25% load step change 500 s short circuit protection continuous, automatics recovery general specifications parameter conditions min. typ. max. unit isolation voltage 1 minute standard suffix h 1600 3000 vdc isolation resistance 500vdc 1 g isolation capacitance standard suffix h 50 50 pf switching frequency 100 khz design meets ul60950-1 en60950-1 iec60950-1 case material non-conductive black plastic base material non-conductive black plastic potting material silicone (ul94 v-0) weight 2.7g (0.10oz) mtbf mil-hdbk-217f, full load 5.627 x 10 6 hrs environmental specifications parameter conditions min. typ. max. unit operating ambient temperature without derating with derating -40 71 71 +105 storage temperature range -55 +125 thermal shock mil-std-810f vibration mil-std-810f relative humidity 5% to 95% rh
sds03w sdh03w 3 www.pduke.com 2014/08/19 emc specifications parameter conditions level emi (1) en55022 class a, class b esd en61000-4-2 air 8kv contact 6kv perf. criteria a radiated immunity en61000-4-3 10 v/m perf. criteria a fast transient (2) en61000-4-4 2kv perf. criteria a surge (2) en61000-4-5 1kv perf. criteria a conducted immunity en61000-4-6 10 vr.m.s perf. criteria a note: 1. the standard modules meet emi class a or class b an d input reflected ripple current with external comp onents. for further information, please contact with p-duke. 2. an external input filter capacitor is required if t he module has to meet en61000-4-4, en61000-4-5. the filter capacitor power mate suggest: nippon che mi-con ky series, 220 f/100v. caution: this power module is not internally fused. an input line fuse must always be used. characteristic curve sds(h)03-24s05w derating curve sds(h)03-24s05w effi ciency vs. input voltage sds(h)03-24s05w efficiency vs. output current mechanical drawing sd s 03w: smd type pin connection pin single dual 1 +vin +vin 2 -vin -vin 4 ctrl ctrl 5 nc -vout 6 -vout common 7 +vout +vout 1. all dimensions in inch (mm) 2. tolerance :x.xx0.02 (x.x0.5) x.xxx0.01 (x.xx0.25) 3. pin pitch tolerance 0.01 (0.25) 4. pin dimension tolerance 0.004(0.1) sd h 03w: dip type
|